Search content
Sort by
Showing 20 of 21 results by poisons77
Re: Team Black Miner!(Ethereum, Ethereum classic, Vertcoin, Zilliqa + dual 0.5% fee)
Quote from: sp_
Retuning can give you a higher hashrate on lower clocks. Perhaps you need to add 2watts of power per card.
Some of your cards are working though. Is the 3 same cards crashing or is it random?
Some of your cards are working though. Is the 3 same cards crashing or is it random?
I'll test further
Re: Team Black Miner!(Ethereum, Ethereum classic, Vertcoin, Zilliqa + dual 0.5% fee)
Quote from: sp_
Quote from: poisons77
I tried the 1.22 both with --xintensity 60 and --dagintensity 1, still GPU are crashing and freezing the system
Perhaps your clocks are too high, or the power is too low to run this kernel on your computer. You might need to retune the rig to find the optimal settings for the Team Black Miner.
Yes, my clocks are high, as well as the hashrate, I'll not lower them. All the other miners run smoothly
Re: Team Black Miner!(Ethereum, Ethereum classic, Vertcoin, Zilliqa + dual 0.5% fee)
3 of your gpus crashed when creating the dag and didn't start. Try v1.22 with --dagintensity 1
I tried the 1.22 both with --xintensity 60 and --dagintensity 1, still GPU are crashing and freezing the systemRe: Team Black Miner!(Ethereum, Ethereum classic, Vertcoin, Zilliqa + dual 0.5% fee)
Code:
Additional step for AMD devices
TBM uses AMD ADL library to read GPU information from AMD cards.
We have added two AMD libraries to make this step a little easier.
This step is not neccesary if you already have the libraries.
The miner can work without them but then without statistics for AMD GPU cards.
Copy the shared objects (.so) to the systems library path:
sudo cp libatiadlxx.so /usr/lib/
sudo cp libatiuki.so.1 /usr/lib/
TBM uses AMD ADL library to read GPU information from AMD cards.
We have added two AMD libraries to make this step a little easier.
This step is not neccesary if you already have the libraries.
The miner can work without them but then without statistics for AMD GPU cards.
Copy the shared objects (.so) to the systems library path:
sudo cp libatiadlxx.so /usr/lib/
sudo cp libatiuki.so.1 /usr/lib/
After doing this I get this error:
Code:
modprobe: FATAL: Module fglrx not found in directory /lib/modules/5.4.0-hiveos
Error! Fail to load fglrx kernel module! Maybe you can switch to root user to load kernel module directly
Error! Fail to load fglrx kernel module! Maybe you can switch to root user to load kernel module directly
If I remove the 2 files from /usr/lib it works with no error, but also with no stats
Re: Team Black Miner!(Ethereum, Ethereum classic, Vertcoin, Zilliqa + dual 0.5% fee)
Code:
Additional step for AMD devices
TBM uses AMD ADL library to read GPU information from AMD cards.
We have added two AMD libraries to make this step a little easier.
This step is not neccesary if you already have the libraries.
The miner can work without them but then without statistics for AMD GPU cards.
Copy the shared objects (.so) to the systems library path:
sudo cp libatiadlxx.so /usr/lib/
sudo cp libatiuki.so.1 /usr/lib/
TBM uses AMD ADL library to read GPU information from AMD cards.
We have added two AMD libraries to make this step a little easier.
This step is not neccesary if you already have the libraries.
The miner can work without them but then without statistics for AMD GPU cards.
Copy the shared objects (.so) to the systems library path:
sudo cp libatiadlxx.so /usr/lib/
sudo cp libatiuki.so.1 /usr/lib/
After doing this I get this error:
Code:
modprobe: FATAL: Module fglrx not found in directory /lib/modules/5.4.0-hiveos
Error! Fail to load fglrx kernel module! Maybe you can switch to root user to load kernel module directly
Error! Fail to load fglrx kernel module! Maybe you can switch to root user to load kernel module directly
Re: Team Black Miner!(Ethereum, Ethereum classic, Vertcoin, Zilliqa + dual 0.5% fee)
--xintensity 60 works good on the 580
I tried again and it Failed. Key points:
- All the stats are 0
- 3 on 9 GPU are all 0, even if they are recognized
- for these 3 GPU I received the message of start generating dag, but no other message (dag generated, verified, kernel selected and xintensity set)
- there's a recurring error/warning "Cannot open shared object file"
- after the threads exited, the system freezes and I've to maually reboot
- the average hashrates are lower than teamredminer but probably because of few minutes mining, it's not enough.
I use HiveOs last version with TeamBlackMiner 1.21, 2miners pool, --xintensity 60, 9x AMD 580 Nitro
Everything works fine with teamredminer, same configs
Here the screenshots:
https://ibb.co/YZZJnLM
https://ibb.co/sV1CcQb
Quote
00:00:35 [2021-10-31 08:52:08.028] Cannot open shared object file
00:00:35 [2021-10-31 08:52:08.028]
00:00:35 [2021-10-31 08:52:08.028]
00:00:35 [2021-10-31 08:52:08.028] asia-eth.2miners.com (ethash) PING: 50ms DIFFICULTY: 2.03 EPOCH: 450
00:00:35 [2021-10-31 08:52:08.028]
00:00:35 [2021-10-31 08:52:08.028]
00:00:35 [2021-10-31 08:52:08.028] ID BOARD TYPE KERN XINT TEMP FAN CORE MEM WATT
00:00:35 [2021-10-31 08:52:08.028] GPU0 Ellesme OpenCL 0 60 0/0 0 0 0 0
00:00:35 [2021-10-31 08:52:08.028] GPU1 Ellesme OpenCL 0 60 0/0 0 0 0 0
00:00:35 [2021-10-31 08:52:08.028] GPU2 Ellesme OpenCL 0 60 0/0 0 0 0 0
00:00:35 [2021-10-31 08:52:08.028] GPU3 Ellesme OpenCL 0 60 0/0 0 0 0 0
00:00:35 [2021-10-31 08:52:08.028] GPU4 Ellesme OpenCL 0 60 0/0 0 0 0 0
00:00:35 [2021-10-31 08:52:08.028] GPU5 Ellesme OpenCL 0 60 0/0 0 0 0 0
00:00:35 [2021-10-31 08:52:08.028] GPU6 Ellesme OpenCL 0 60 0/0 0 0 0 0
00:00:35 [2021-10-31 08:52:08.028] GPU7 Ellesme OpenCL 0 60 0/0 0 0 0 0
00:00:35 [2021-10-31 08:52:08.028] GPU8 Ellesme OpenCL 0 60 0/0 0 0 0 0
00:00:35 [2021-10-31 08:52:08.028] 0
00:00:35 [2021-10-31 08:52:08.028]
00:00:35 [2021-10-31 08:52:08.028] ID BOARD HASHRATE/W HASHRATE AVERAGE SHARES
00:00:35 [2021-10-31 08:52:08.028] GPU0 Ellesme 0.00 H/W 33.59 MH/s 33.25 MH/s 1/0/0 (100.00%)
00:00:35 [2021-10-31 08:52:08.029] GPU1 Ellesme 0.00 H/W 33.73 MH/s 32.73 MH/s 2/0/0 (100.00%)
00:00:35 [2021-10-31 08:52:08.029] GPU2 Ellesme 0.00 H/W 30.22 MH/s 29.90 MH/s 2/0/0 (100.00%)
00:00:35 [2021-10-31 08:52:08.029] GPU3 Ellesme 0.00 H/W 0.00 H/s 0.00 H/s 0/0/0 (100.00%)
00:00:35 [2021-10-31 08:52:08.029] GPU4 Ellesme 0.00 H/W 0.00 H/s 0.00 H/s 0/0/0 (100.00%)
00:00:35 [2021-10-31 08:52:08.029] GPU5 Ellesme 0.00 H/W 41.97 MH/s 32.51 MH/s 0/0/0 (100.00%)
00:00:35 [2021-10-31 08:52:08.029] GPU6 Ellesme 0.00 H/W 0.00 H/s 0.00 H/s 0/0/0 (100.00%)
00:00:35 [2021-10-31 08:52:08.029] GPU7 Ellesme 0.00 H/W 32.27 MH/s 32.33 MH/s 0/0/0 (100.00%)
00:00:35 [2021-10-31 08:52:08.029] GPU8 Ellesme 0.00 H/W 29.81 MH/s 29.54 MH/s 0/0/0 (100.00%)
00:00:35 [2021-10-31 08:52:08.029] 0.00 H/W 201.58 MH/s 190.26 MH/s 5/0/0 (100.00%)
00:00:35 [2021-10-31 08:52:08.029]
00:00:35 [2021-10-31 08:52:08.029] SHARES PER MINUTE: 1.00 POOL HASHRATE: 145.44 MH/s
00:00:35 [2021-10-31 08:52:08.028]
00:00:35 [2021-10-31 08:52:08.028]
00:00:35 [2021-10-31 08:52:08.028] asia-eth.2miners.com (ethash) PING: 50ms DIFFICULTY: 2.03 EPOCH: 450
00:00:35 [2021-10-31 08:52:08.028]
00:00:35 [2021-10-31 08:52:08.028]
00:00:35 [2021-10-31 08:52:08.028] ID BOARD TYPE KERN XINT TEMP FAN CORE MEM WATT
00:00:35 [2021-10-31 08:52:08.028] GPU0 Ellesme OpenCL 0 60 0/0 0 0 0 0
00:00:35 [2021-10-31 08:52:08.028] GPU1 Ellesme OpenCL 0 60 0/0 0 0 0 0
00:00:35 [2021-10-31 08:52:08.028] GPU2 Ellesme OpenCL 0 60 0/0 0 0 0 0
00:00:35 [2021-10-31 08:52:08.028] GPU3 Ellesme OpenCL 0 60 0/0 0 0 0 0
00:00:35 [2021-10-31 08:52:08.028] GPU4 Ellesme OpenCL 0 60 0/0 0 0 0 0
00:00:35 [2021-10-31 08:52:08.028] GPU5 Ellesme OpenCL 0 60 0/0 0 0 0 0
00:00:35 [2021-10-31 08:52:08.028] GPU6 Ellesme OpenCL 0 60 0/0 0 0 0 0
00:00:35 [2021-10-31 08:52:08.028] GPU7 Ellesme OpenCL 0 60 0/0 0 0 0 0
00:00:35 [2021-10-31 08:52:08.028] GPU8 Ellesme OpenCL 0 60 0/0 0 0 0 0
00:00:35 [2021-10-31 08:52:08.028] 0
00:00:35 [2021-10-31 08:52:08.028]
00:00:35 [2021-10-31 08:52:08.028] ID BOARD HASHRATE/W HASHRATE AVERAGE SHARES
00:00:35 [2021-10-31 08:52:08.028] GPU0 Ellesme 0.00 H/W 33.59 MH/s 33.25 MH/s 1/0/0 (100.00%)
00:00:35 [2021-10-31 08:52:08.029] GPU1 Ellesme 0.00 H/W 33.73 MH/s 32.73 MH/s 2/0/0 (100.00%)
00:00:35 [2021-10-31 08:52:08.029] GPU2 Ellesme 0.00 H/W 30.22 MH/s 29.90 MH/s 2/0/0 (100.00%)
00:00:35 [2021-10-31 08:52:08.029] GPU3 Ellesme 0.00 H/W 0.00 H/s 0.00 H/s 0/0/0 (100.00%)
00:00:35 [2021-10-31 08:52:08.029] GPU4 Ellesme 0.00 H/W 0.00 H/s 0.00 H/s 0/0/0 (100.00%)
00:00:35 [2021-10-31 08:52:08.029] GPU5 Ellesme 0.00 H/W 41.97 MH/s 32.51 MH/s 0/0/0 (100.00%)
00:00:35 [2021-10-31 08:52:08.029] GPU6 Ellesme 0.00 H/W 0.00 H/s 0.00 H/s 0/0/0 (100.00%)
00:00:35 [2021-10-31 08:52:08.029] GPU7 Ellesme 0.00 H/W 32.27 MH/s 32.33 MH/s 0/0/0 (100.00%)
00:00:35 [2021-10-31 08:52:08.029] GPU8 Ellesme 0.00 H/W 29.81 MH/s 29.54 MH/s 0/0/0 (100.00%)
00:00:35 [2021-10-31 08:52:08.029] 0.00 H/W 201.58 MH/s 190.26 MH/s 5/0/0 (100.00%)
00:00:35 [2021-10-31 08:52:08.029]
00:00:35 [2021-10-31 08:52:08.029] SHARES PER MINUTE: 1.00 POOL HASHRATE: 145.44 MH/s
Re: Team Black Miner!(Ethereum, Ethereum classic, Vertcoin, Zilliqa + dual 0.5% fee)
Ok, I want to retry but I'm a bit confused.
My configuration is 9x580, on HiveOs, Amd driver 20.40 (5.9.0325)
What is the best configuration for my rig?
Till 1.19 it always failed, but before retrying would like to start with the best configuration options
Thanks
My configuration is 9x580, on HiveOs, Amd driver 20.40 (5.9.0325)
What is the best configuration for my rig?
Till 1.19 it always failed, but before retrying would like to start with the best configuration options
Thanks
Re: Team Black Miner!(Ethereum, Ethereum classic, Vertcoin, Zilliqa + dual 0.5% fee)
I'm still not able to make TBlackMiner work. I've installed the 1.19 from HiveOs, and this is the screenshot of the Miner console.
As you can see is printing multiple time per second the hashrate of each GPU, and still 3 GPU are not recognized. Then they go in timeout and exit, the system freezes, I've to phisically reboot.
All are RX 580. I've no problem with other miners.
https://ibb.co/9VqVY65
As you can see is printing multiple time per second the hashrate of each GPU, and still 3 GPU are not recognized. Then they go in timeout and exit, the system freezes, I've to phisically reboot.
All are RX 580. I've no problem with other miners.
https://ibb.co/9VqVY65
Re: Team Black Miner!(Ethereum, Ethereum classic, Vertcoin, Zilliqa + dual 0.5% fee)
try --cl-devices [0,1,2,3,4,5,6,7] instead of --auto-detect . Don't use both options at the same time.
I just use the --cl-devices command in the "extra config arguments" on HiveOs, and it automatically don't use the --auto-detect?
Re: Team Black Miner!(Ethereum, Ethereum classic, Vertcoin, Zilliqa + dual 0.5% fee)
No the 3gb is from the opencl call to determine the size of your card. Could be related to a wrong gpu platform, or a driver installation gone wrong. You should do a driver uninstall with wipe and do a reinstall.
Well, if I stop the miner and run the --list-devices command, all the devices are read again with 8gb, so it is the "free memory" what you see from the tbminer --list-devices command, not the hardware memory
Re: Team Black Miner!(Ethereum, Ethereum classic, Vertcoin, Zilliqa + dual 0.5% fee)
Seems to be a driver problem. Weird, never seen this before..
Maybe because of the DAG generation fails? It makes sense if the memory remain "occupied" by the failed DAG generated. 8gb - DAG size, then rounded is 3gb as I see in the list.
This can also explain why I can fix only when I reboot the rig
Re: Team Black Miner!(Ethereum, Ethereum classic, Vertcoin, Zilliqa + dual 0.5% fee)
try
tbminer --list-devices
what do you get?
tbminer --list-devices
what do you get?
Code:
Available Cuda devices
-----------------------
Available OpenCL devices
-------------------------
Device Number: 0
Device name: Ellesmere
PCIe bus id: 1
Memory: 3GB
Device Number: 1
Device name: Ellesmere
PCIe bus id: 2
Memory: 3GB
Device Number: 2
Device name: Ellesmere
PCIe bus id: 3
Memory: 3GB
Device Number: 3
Device name: Ellesmere
PCIe bus id: 4
Memory: 3GB
Device Number: 4
Device name: Ellesmere
PCIe bus id: 8
Memory: 3GB
Device Number: 5
Device name: Ellesmere
PCIe bus id: 11
Memory: 3GB
Device Number: 6
Device name: Ellesmere
PCIe bus id: 12
Memory: 3GB
Device Number: 7
Device name: Ellesmere
PCIe bus id: 13
Memory: 3GB
Device Number: 8
Device name: Ellesmere
PCIe bus id: 14
Memory: 3GB
-----------------------
Available OpenCL devices
-------------------------
Device Number: 0
Device name: Ellesmere
PCIe bus id: 1
Memory: 3GB
Device Number: 1
Device name: Ellesmere
PCIe bus id: 2
Memory: 3GB
Device Number: 2
Device name: Ellesmere
PCIe bus id: 3
Memory: 3GB
Device Number: 3
Device name: Ellesmere
PCIe bus id: 4
Memory: 3GB
Device Number: 4
Device name: Ellesmere
PCIe bus id: 8
Memory: 3GB
Device Number: 5
Device name: Ellesmere
PCIe bus id: 11
Memory: 3GB
Device Number: 6
Device name: Ellesmere
PCIe bus id: 12
Memory: 3GB
Device Number: 7
Device name: Ellesmere
PCIe bus id: 13
Memory: 3GB
Device Number: 8
Device name: Ellesmere
PCIe bus id: 14
Memory: 3GB
Re: Team Black Miner!(Ethereum, Ethereum classic, Vertcoin, Zilliqa + dual 0.5% fee)
Even with 1.19 I've problems.
Some cards are recognized only 3gb. I've all 580 8gb
here's the screenshot
https://ibb.co/jzmTGWQ
Some cards are recognized only 3gb. I've all 580 8gb
here's the screenshot
https://ibb.co/jzmTGWQ
Re: Team Black Miner!(Ethereum, Ethereum classic, Vertcoin, Zilliqa + dual 0.5% fee)
v1.16 has a overflow bug if the intensity is too high dynamic -1 for AMD. This bug was fixed in v1.18.
The fix is to set --xintensity 78 or similar, or upgrade to v1.18.
v1.19 ready soon. Testing now..
The fix is to set --xintensity 78 or similar, or upgrade to v1.18.
v1.19 ready soon. Testing now..
I upgraded to 1.18 as you can see in the screenshot, but still getting the error for the DAG file verification. The difference with the 1.16 in my case is that before the DAG verification was the only error. Now with the 1.18 after getting the DAG verification error, when I restart the miner 2 cards get recognized only 3GB on 8. Restarting the miner didn't work, neither with a different miner, I had to restart the rig to make another miner working again.
Can it be because I'm CPU mining with cpuminer-opt?
Re: Team Black Miner!(Ethereum, Ethereum classic, Vertcoin, Zilliqa + dual 0.5% fee)
I still have problems.
After exiting the first time because of a Dag file not verified, I restarted the miner and I got another error, it sees only 3GB of memory on 2 GPU.
Restarting the miner didn't solve the problem, I could fix only rebooting the rig. I use TBM 1.18 on HiveOs latest version.
I also use CPU mining with cpuminer-opt-gr
here's the screenshot
https://ibb.co/mXyvnXJ
After exiting the first time because of a Dag file not verified, I restarted the miner and I got another error, it sees only 3GB of memory on 2 GPU.
Restarting the miner didn't solve the problem, I could fix only rebooting the rig. I use TBM 1.18 on HiveOs latest version.
I also use CPU mining with cpuminer-opt-gr
here's the screenshot
https://ibb.co/mXyvnXJ
Re: Team Black Miner!(Ethereum, Ethereum classic, Vertcoin, Zilliqa + dual 0.5% fee)
if this doesn't work, do this (right click in Shell-in-a-box, paste from browser, then hit Return key to validate the command)
Then restart miner in HiveOS
Code:
cd /hive/miners/teamblackminer/1.16/
mv TBMiner TBMiner.bak
wget https://github.com/sp-hash/TeamBlackMiner/releases/download/v1.18/TeamBlackMiner_1_18_Ubuntu_18_04_Cuda_11_4.zip
unzip TeamBlackMiner_1_18_Ubuntu_18_04_Cuda_11_4.zip
cp /hive/miners/teamblackminer/1.16/TeamBlackMiner_1_18_Ubuntu_18_04_Cuda_11_4/TBMiner /hive/miners/teamblackminer/1.16/
chmod +x TBMiner
mv TBMiner TBMiner.bak
wget https://github.com/sp-hash/TeamBlackMiner/releases/download/v1.18/TeamBlackMiner_1_18_Ubuntu_18_04_Cuda_11_4.zip
unzip TeamBlackMiner_1_18_Ubuntu_18_04_Cuda_11_4.zip
cp /hive/miners/teamblackminer/1.16/TeamBlackMiner_1_18_Ubuntu_18_04_Cuda_11_4/TBMiner /hive/miners/teamblackminer/1.16/
chmod +x TBMiner
Then restart miner in HiveOS
Thanks for your time, it worked flawlessy
Re: Team Black Miner!(Ethereum, Ethereum classic, Vertcoin, Zilliqa + dual 0.5% fee)
Use fileZilla upload new version TBMiner and upload news version in dir: /hive/miners/teamblackminer/1.16/ and if you ask to overwrite with a new version you say => yes
while waiting for them to update their mirror sometimes they are fast other times not ..
while waiting for them to update their mirror sometimes they are fast other times not ..
Thanks dedizonesv2, I'll give it a try
Re: Team Black Miner!(Ethereum, Ethereum classic, Vertcoin, Zilliqa + dual 0.5% fee)
When for any reason the miner exits, the system stucks on the message:
"trying to release TIME_WAIT sockets"
It happened already twice, once exited because one card was stuck at 0, and once as the screenshot below, one GPU dag verification failed.
https://ibb.co/RCJVrr6
"trying to release TIME_WAIT sockets"
It happened already twice, once exited because one card was stuck at 0, and once as the screenshot below, one GPU dag verification failed.
https://ibb.co/RCJVrr6
Re: Team Black Miner!(Ethereum, Ethereum classic, Vertcoin, Zilliqa + dual 0.5% fee)
There is a problem with the SSL connection. We are working on it. Use the normal ports
If I use the normal port, I get the following error: "SSL connect error"
you can see from the screenshot
https://ibb.co/XZTXcK6
Re: Team Black Miner!(Ethereum, Ethereum classic, Vertcoin, Zilliqa + dual 0.5% fee)
I cannoct connect to any pool, I tried 2miners and crazypool, so I assume it is a general problem. I've hiveOs last version and tried with teamblackminer 1.16, latest version available for HiveOs. I get an "incorrect login" if I use the SSL url, and a weird "SSL connect error" if I use the normal url. I set the worker name manually, all lower case and no space
https://i.ibb.co/XZTXcK6/crazypool-error.png
https://i.ibb.co/XZTXcK6/crazypool-error.png
