Hey Guys!

So I have 2 Zig Z1+ and the default ip for it is 192.168.1.100. I read that to change the other basics to 192.168.1.101+. so I logged in my router and changed the 2nd miner to reserved IP to 192.168.1.101 but It didn't work. Did I do it right? or what is the simplest way to do so! Thanks!!

Hey guys finally got my miner up and running for only 2 hours and it seems like it's too hot? It says 88* farenheit. Is it not displaying properly or is there something wrong with the miner?
Chan 1 is 111 degrees farenheit
Chan  2 is 115 degrees
Chan 3 is 117 degrees
Chan 4 is 118 degrees
And core is 88 degrees farenheit

Ok so I logged into my router's settings and I changed my network to be 192.168.1.1 now. It now sees the miner under a weird name but it has its ipv4 address of 192.168.1.100. I entered that in but it will not connect me to the miner. Any ideas why? Thanks for the help!

Hello guys,

It's been 5 hours+ of me trying to find the Zig Z1+'s Ip Address. I used the default Ip they told me to use which is 196.168.1.100. I logged into my routers setting to find the device and it shows up something like this
" 9A:24:6g:38:3d " as the devices name. I clicked on it and it only shows the IPv6 address and mac address only. It does not display the Ipv4 address. My Xfinity router's IP all starts with 10.0.0.1 and up. All devices connected to the network shows their Ipv4 addresses except the Zig Z1+ miner.

What are some things I can try to do to find a way to connect to the Dayun Zig Z1's address. Any help is appreciated!

Hi Guys I have trouble with my Inno A9 Zmaster fan speed. You can hear it rev up and down then up and down. So I checked the miner logs and it seems that the fan SET speed and Target speed keeps changing. What do you think is going on? Do I have faulty fans or is the miner faulty itself? I contacted Inno themselves but they cant find a solution... I would greatly appreciate if anyone have any sort of a hunch to begin looking at why this is happening. Thank you!!

Oct 01 23:29:21 InnoMiner sgminer[1465]: fan speed set to 20, TARGET is 22
Oct 01 23:29:22 InnoMiner sgminer[1465]: Accepted 3f1bc032 Diff 0/139264 HLT 2
Oct 01 23:29:23 InnoMiner sgminer[1465]: fan speed set to 25, TARGET is 22
Oct 01 23:29:29 InnoMiner sgminer[1465]: fan speed set to 20, TARGET is 22
Oct 01 23:29:30 InnoMiner sgminer[1465]: Accepted 6771b38a Diff 0/139264 HLT 0
Oct 01 23:29:31 InnoMiner sgminer[1465]: Accepted 23ceea7b Diff 0/139264 HLT 0
Oct 01 23:29:33 InnoMiner sgminer[1465]: fan speed set to 25, TARGET is 22
Oct 01 23:29:34 InnoMiner sgminer[1465]: Accepted 1d4c74b7 Diff 0/139264 HLT 1
Oct 01 23:29:38 InnoMiner sgminer[1465]: Accepted 3bb38259 Diff 0/139264 HLT 0
Oct 01 23:29:40 InnoMiner sgminer[1465]: Accepted 71e237db Diff 0/139264 HLT 0
Oct 01 23:29:41 InnoMiner sgminer[1465]: fan speed set to 20, TARGET is 22
Oct 01 23:29:43 InnoMiner sgminer[1465]: Accepted 6dcdb64e Diff 0/139264 HLT 2
Oct 01 23:29:46 InnoMiner sgminer[1465]: Repeat data!
Oct 01 23:29:46 InnoMiner sgminer[1465]: Notice!!! Error Nonce
Oct 01 23:29:46 InnoMiner sgminer[1465]: HLT0: invalid nonce - HW error
Oct 01 23:29:46 InnoMiner sgminer[1465]: 0: chip 2: invalid nonce 0xb44fdff4
Oct 01 23:29:46 InnoMiner sgminer[1465]: Stratum reconnect requested from pool 0 to equihash.usa.nicehash.com:3357
Oct 01 23:29:46 InnoMiner sgminer[1465]: Cleared 2097 work items due to stratum disconnect on pool 0
Oct 01 23:29:46 InnoMiner sgminer[1465]: nonce_ranges_processed less than 0
Oct 01 23:29:47 InnoMiner sgminer[1465]: subscribe response: {"id":21520,"error":null,"result":[null,"2f026502000bc9d136"]}
Oct 01 23:29:47 InnoMiner sgminer[1465]: Stratum authorisation success for pool 0
Oct 01 23:29:47 InnoMiner sgminer[1465]: Pool 0 difficulty changed to 0000787c3c59e2cf000000000000000000000000000000000000000000000000
Oct 01 23:29:47 InnoMiner sgminer[1465]: New block: 00000000648ce801f9916dd63e6c9c20e8c1a19013ea56f8f4f991424c45c342... diff 143M
Oct 01 23:29:47 InnoMiner sgminer[1465]: Stratum from pool 0 detected new block
Oct 01 23:29:51 InnoMiner sgminer[1465]: Accepted 72c82531 Diff 0/139245 HLT 2
Oct 01 23:29:52 InnoMiner sgminer[1465]: Stratum reconnect requested from pool 0 to equihash.usa.nicehash.com:3357
Oct 01 23:29:52 InnoMiner sgminer[1465]: Cleared 1559 work items due to stratum disconnect on pool 0
Oct 01 23:29:52 InnoMiner sgminer[1465]: subscribe response: {"id":21523,"error":null,"result":[null,"410000112f"]}
Oct 01 23:29:52 InnoMiner sgminer[1465]: Stratum authorisation success for pool 0
Oct 01 23:29:52 InnoMiner sgminer[1465]: Pool 0 difficulty changed to 0000787878780000000000000000000000000000000000000000000000000000
Oct 01 23:29:52 InnoMiner sgminer[1465]: New block: 00000000a502020923a090318a11e84ceda74df4bd0afd352f6b71a79bc2bbba... diff 143M
Oct 01 23:29:52 InnoMiner sgminer[1465]: Stratum from pool 0 detected new block
Oct 01 23:29:57 InnoMiner sgminer[1465]: 2: chip 7: stale nonce 0xb34fbff4
Oct 01 23:29:58 InnoMiner sgminer[1465]: Accepted 7ede9d15 Diff 0/139264 HLT 0
Oct 01 23:29:59 InnoMiner sgminer[1465]: Accepted 0cbfc1e2 Diff 0/139264 HLT 1
Oct 01 23:29:59 InnoMiner sgminer[1465]: FAN SPEED TARGET set to 20
Oct 01 23:29:59 InnoMiner sgminer[1465]: fan speed set to 15, TARGET is 20
Oct 01 23:30:03 InnoMiner sgminer[1465]: fan speed set to 20, TARGET is 20