Ninjastic
Search content
Sort by
Showing 9 of 9 results by ri2307
Post
Topic
Board Mining (Altcoins)
Re: [Mining OS] SimpleMining.net - Easy to use GPU MINING Operating System
by
ri2307
on 30/05/2018, 19:58:07 UTC
Quote from: ri2307 on May 30, 2018, 12:32:34 PM
Quote from: Saki3d on May 30, 2018, 12:01:34 PM
Quote from: ri2307 on May 30, 2018, 11:49:19 AM
Quote from: SavageMine on May 30, 2018, 11:39:13 AM
Quote from: nadeaup on May 30, 2018, 11:25:45 AM
Quote from: ri2307 on May 30, 2018, 11:02:47 AM
hi all, I have a rig with 8 RX 580 4GB Nitro + using smos which was working fine for couple of months. Since couple of weeks started throwing a lot of errors on the screen:

[ 848.039335] pcieport 0000:00:1c.1: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e1(Receiver ID)

and this keeps repeating.
I replaced all the risers, switched the ports used by the cards, and this keeps going against the same port always and rig is unstable.

Any hints for me?

thanks in advance

Sounds like a bad pcie extender. Another thought, depending on your location, summer temperatures are here and you may need to dial back your overclock settings slightly for the warmer temperatures.

When you say you replaced the risers, did you replace the entire riser (PCIe to USB adapter at MB, USB 3.0 cable and the riser itself)?

Yes, everything from the pcie port on the motherboard to the riser itself and the riser.

Try with one working riser and gpu and try system with every pcie ports. ( Forexample  connect one riser to pcie0 boot system and try mining u look it iseems ok then shutdown and try other pcie port.. ) if al works one port fails it can be motherboard side problem.
if all ports works then maybe problem is psu side.
if u didnt already change usb pen/ssd / try with fresh one.

thats all i remember when i am facing smilar problems. hope it helps.

thank you for the hints, i will try this evening and come back with details.

best regards

hi, I flashed again the usb stick and everything started to work good again.

thank you
Post
Topic
Board Mining (Altcoins)
Re: [Mining OS] SimpleMining.net - Easy to use GPU MINING Operating System
by
ri2307
on 30/05/2018, 12:32:34 UTC
Quote from: Saki3d on May 30, 2018, 12:01:34 PM
Quote from: ri2307 on May 30, 2018, 11:49:19 AM
Quote from: SavageMine on May 30, 2018, 11:39:13 AM
Quote from: nadeaup on May 30, 2018, 11:25:45 AM
Quote from: ri2307 on May 30, 2018, 11:02:47 AM
hi all, I have a rig with 8 RX 580 4GB Nitro + using smos which was working fine for couple of months. Since couple of weeks started throwing a lot of errors on the screen:

[ 848.039335] pcieport 0000:00:1c.1: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e1(Receiver ID)

and this keeps repeating.
I replaced all the risers, switched the ports used by the cards, and this keeps going against the same port always and rig is unstable.

Any hints for me?

thanks in advance

Sounds like a bad pcie extender. Another thought, depending on your location, summer temperatures are here and you may need to dial back your overclock settings slightly for the warmer temperatures.

When you say you replaced the risers, did you replace the entire riser (PCIe to USB adapter at MB, USB 3.0 cable and the riser itself)?

Yes, everything from the pcie port on the motherboard to the riser itself and the riser.

Try with one working riser and gpu and try system with every pcie ports. ( Forexample  connect one riser to pcie0 boot system and try mining u look it iseems ok then shutdown and try other pcie port.. ) if al works one port fails it can be motherboard side problem.
if all ports works then maybe problem is psu side.
if u didnt already change usb pen/ssd / try with fresh one.

thats all i remember when i am facing smilar problems. hope it helps.

thank you for the hints, i will try this evening and come back with details.

best regards
Post
Topic
Board Mining (Altcoins)
Re: [Mining OS] SimpleMining.net - Easy to use GPU MINING Operating System
by
ri2307
on 30/05/2018, 11:49:19 UTC
Quote from: SavageMine on May 30, 2018, 11:39:13 AM
Quote from: nadeaup on May 30, 2018, 11:25:45 AM
Quote from: ri2307 on May 30, 2018, 11:02:47 AM
hi all, I have a rig with 8 RX 580 4GB Nitro + using smos which was working fine for couple of months. Since couple of weeks started throwing a lot of errors on the screen:

[ 848.039335] pcieport 0000:00:1c.1: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e1(Receiver ID)

and this keeps repeating.
I replaced all the risers, switched the ports used by the cards, and this keeps going against the same port always and rig is unstable.

Any hints for me?

thanks in advance

Sounds like a bad pcie extender. Another thought, depending on your location, summer temperatures are here and you may need to dial back your overclock settings slightly for the warmer temperatures.

When you say you replaced the risers, did you replace the entire riser (PCIe to USB adapter at MB, USB 3.0 cable and the riser itself)?

Yes, everything from the pcie port on the motherboard to the riser itself and the riser.
Post
Topic
Board Mining (Altcoins)
Re: [Mining OS] SimpleMining.net - Easy to use GPU MINING Operating System
by
ri2307
on 30/05/2018, 11:02:47 UTC
hi all, I have a rig with 8 RX 580 4GB Nitro + using smos which was working fine for couple of months. Since couple of weeks started throwing a lot of errors on the screen:

[ 848.039335] pcieport 0000:00:1c.1: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e1(Receiver ID)

and this keeps repeating.
I replaced all the risers, switched the ports used by the cards, and this keeps going against the same port always and rig is unstable.

Any hints for me?

thanks in advance
Post
Topic
Board Mining (Altcoins)
Re: Watchdog: GPU hangs in OpenCL call, exit error
by
ri2307
on 19/02/2018, 12:24:39 UTC
hi guys, I have one rig with 8 x RX580 nitro+ and I am trying to use claymore 11 (the latest version) whenever I start it one of the GPUs has 0.00 Mh/s and gets also an error:

WATCHDOG: GPU 7 hangs in OpenCL call, exit
WATCHDOG: GPU 7 hangs in OpenCL call, exit
Quit, please wait...

I need to mention that on claymore 10.6 all works ok so i do not think it is related to overclocking or undervolting, drivers, bad riser, etc.
I am using linux as OS.

any advices?

thanks in advance
Post
Topic
Board Mining (Altcoins)
Re: [Mining OS] SimpleMining.net - Easy to use GPU MINING Operating System
by
ri2307
on 19/02/2018, 09:42:19 UTC
hi guys, I have one rig with 8 x RX580 nitro+ and I am trying to use claymore 11 on SMOS (the latest version) whenever I start it one of the GPUs has 0.00 Mh/s and gets also an error:

WATCHDOG: GPU 7 hangs in OpenCL call, exit
WATCHDOG: GPU 7 hangs in OpenCL call, exit
Quit, please wait...

I need to mention that on claymore 10.6 all works ok.

any advices?

thanks in advance
Post
Topic
Board Mining (Altcoins)
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v11.0 (Windows/Linux)
by
ri2307
on 19/02/2018, 08:54:24 UTC
Quote from: ri2307 on February 18, 2018, 07:37:32 PM
hi guys, I have one rig with 8 x RX580 nitro+ and I am trying to use claymore 11 (the latest version) whenever I start it one of the GPUs has 0.00 Mh/s and gets also an error:

WATCHDOG: GPU 7 hangs in OpenCL call, exit
WATCHDOG: GPU 7 hangs in OpenCL call, exit
Quit, please wait...

I need to mention that on claymore 10.6 all works ok.
I am using linux as OS.

any advices?

thanks in advance

UP
Post
Topic
Board Mining (Altcoins)
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v11.0 (Windows/Linux)
by
ri2307
on 18/02/2018, 19:37:32 UTC
hi guys, I have one rig with 8 x RX580 nitro+ and I am trying to use claymore 11 (the latest version) whenever I start it one of the GPUs has 0.00 Mh/s and gets also an error:

WATCHDOG: GPU 7 hangs in OpenCL call, exit
WATCHDOG: GPU 7 hangs in OpenCL call, exit
Quit, please wait...

I need to mention that on claymore 10.6 all works ok.
I am using linux as OS.

any advices?

thanks in advance
Post
Topic
Board Mining (Altcoins)
Re: [Mining OS] SimpleMining.net - Easy to use GPU MINING Operating System
by
ri2307
on 29/01/2018, 10:58:14 UTC
Hello, I built my first mining rig like 2 weeks ago and I have some tuning question, but first let me share the config that I have:
- 6 AMD Sapphire RX 580 4 GB Nitro + all Elpida memory
- ROM BIOS used Anoraks_Sapphire RX580 NITRO(plus) 4GB Elpida_memshift
- Overclock settings Core 1190 Memory 2080 Undervolt 820

I am running SMOS with Claymore 10.6 and following config:

-epool eth-eu1.nanopool.org:9999 -ewal -mode 1 -mport 127.0.0.1:3333 -asm 1 -dcri 8

I am getting out of this 180 Mh/s with aprox 920 MW consumption.

I am asking if from your experience I should add/change options to improve the hash rate or I should keep it like this.

Thank you in advance