After several days I'm still wating for the Buyback...

Please solve my request asap.

Regards Robert

9TJU13VWv3NsxdpYZTwRVc7NPU3Uwu42CR

Want to sell max 500 PANDA @ 0.002BTC.

Please send me a PM.

Hi,

When I use Atitweak -l it only lists performancelevel 0 and 1. There is no Performance level 2?

While mining I can use atitweak to change Engine and Memory but have to use Performance level 1 for anything to happen. The same with changing Voltage but the voltage actually never change.

In cgminer it also works to change the Engine clock and the Memory clock and it also says that "Driver reports success..." but the Voltage never changes.

It is the same experience with both the cards
MIS 7970 Lightening & Sapphire Dual-X OC

Any idea what I can do to change the voltage?

Best Regards
Robert

Eventually I solved it with some help from BR0KK.

Here is how I did it...
1. Click on the start menu and type RUN and hit enter. You will see the RUN window, type hdwwiz in the Open field and click OK button.
https://dl.dropbox.com/u/704649/ztex%20driver6.png

2. It will open "Add Hardware Wizard" as shown in the screenshot below. Click "Next" button to proceed to next step.

3. Choose "Install the hardware that I manually select form a list (Advanced)" and click "Next" button.

4. Choose "Show All Devices" and hit the "Next" button.

5. Click "Have Disk" button and browse to ztex-120412\ztex\libusb-win32\ztex.inf at the downloaded SDK folder.

https://dl.dropbox.com/u/704649/ztex%20driver4.png

6. Select the "Ztex module" and click "Next" button.

https://dl.dropbox.com/u/704649/ztex%20driver5.png

7. Click "Next" to skip final window before the installation will begin.

8. Click on the "Finish" button to close the wizard.

9. I then had to power off the Ztex module.

10. When it come up again it was recogniced as a Zetex module and it was possible to run the "java -cp ZtexBTCMiner-120703.jar BTCMiner..." at the CMD promt to start mining.

What am I missing... ?

I try to update the driver to the Unknownd device with the driver in the SDK "ztex-120412\ztex\libusb-win32\ztex.inf"

https://dl.dropbox.com/u/704649/ztex%20driver.png

but only get a message that
"The folder doesn't contain any driver that is campatible with the device. If there is a driver in the folder, check that the driver is designed för Windows x64 based computers."

https://dl.dropbox.com/u/704649/ztex%20driver2.png

Any suggestions...?

Is there any guide about how got get the USB drivers/connection to work?

The BTC Miner says "No device found" and in devices it says "Unkonown device"
OS: Win 7 x64

/Robert

Det är ju rätt många faktorer som spelar in hur stor lönsamheten blir.
Osäkerheten påverkar många att bli mer avvaktande vilket bl.a. gör att det kommer hålla uppe lönsamheten mer än den annars skulle göra.

If you have a mobile that you can use in Europe and easily can use as a WiFI accesspoint I would buy a Kontantkort (SIM card) from 3 that mostly have the best speed.
You can buy it from many petrol stations and bigger supermarkets.

If you don't have nessesary hardware just go to one of the phone shops in the town.
Phonehouse, Telia, 3

Here is e.g. the offer from 3
http://translate.google.com/translate?sl=sv&tl=en&js=n&prev=_t&hl=sv&ie=UTF-8&layout=2&eotf=1&u=http%3A%2F%2Fwww.tre.se%2FPrivat%2FMobilt-bredband%2FDataPrepaidPage%2F

If you mainly will stay at one place during your visit and it's in the middle of nowhere, check with any locals before just to be sure the operator have a good cover.

Hej!

Jag har nu tagit hem både en ztex
http://www.ztex.de/usb-fpga-1/usb-fpga-1.15x.e.html

och en  x6500
http://fpgamining.com/products/x6500-rev3

båda har nu stått och gått i några dagar och snurrar på i ungerfär likvärdig prestanda och i enlighet med de specifikationer som uppgetts, alltså ca 200 MH/s per FPGA chip.

Väntar även på en Cairnsmore1 men den antas bli levererad först i september.
http://www.enterpoint.co.uk/cairnsmore/cairnsmore1.html

För de flesta i Sverige så verkar Ztex från Tyskland eller Cairnsmore1 från UK som de 2 mest attraktiva alternativen.

Någon som har planer på att göra något större inköp av dessa så att man kan pressa priserna ytterligare?

Hej kliffen!
Har du någon mer leverans på gång?

Mvh Robert

Hej Martin!

Är du nöjd med Ztex köpet?
Har du även provat någon annan?

Mvh Robert