The new version is finally ready. You can download PhoenixMiner 5.8a from here:

https://phoenixminer.info/downloads/PhoenixMiner_5.8a_Windows.zip
https://phoenixminer.info/downloads/PhoenixMiner_5.8a_Linux.tar.gz


Changes in version 5.8a :

• Added lock core clock
• Fixed an issue causing crashing with some RTX 3060/3080/3090 cards
• Implemented new "turbo" kernels (-clkernel 3) for AMD Polaris cards that can work with the current DAG sizes over 4 GB. Note that -clkernel 3 uses double the VRAM and will
  provide slightly faster hashrate with slightly higher power consumption. You can use the -rvram command-line parameter to specify how much VRAM to be left unused
• Increased the maximum supported DAG epoch to 600 (i.e. until about Sep 2023)
• Implemented full hardware control for AMD RX6900/6800/6700 cards under Linux. Note that with these cards under Linux you need to specify relative core voltage: e.g. -
  cclock -50 will set the core voltage to be 50 mV under the default value
• Added ROCr kernels for Vega, Radeon VII and Navi cards. With these kernels you will be able to run these cards with Linux drivers 20.45 and later but the performance will
  be lower than with the older PAL drivers and kernels. We recommend using AMD Linux driver 20.30 for all cards except RX6900/6800/6700
• Fixed an issue causing crashing with some RX6900/6800/6700 cards under Linux (there is no need to run these cards with -clkernel 0 anymore)
• Added support for AMD Windows drivers up to 21.8.1. Note that Radeon VII cards will not work with drivers 21.6.1 or higher - you need to use older drivers for proper
  operation of these cards
• Added support for AMD Linux drivers up to 21.20 (use older drivers for Vega or Radeon VII cards as they will not work with 21.20). Note that the latest 21.30 drivers are
  not supported (and the initial testing shows that even the older Polars cards are not working properly with them, so avoid 21.30 for now)
• Numerous other fixes and small improvements

Please let us know if you have any problems or questions related to PhoenixMiner 5.8a

This platform is going to be awesome with continuing development. DXC is extremely undervalued at the moment, picking up another few masternodes today!

Can't wait for Crypto-Bridge!

Purchased a masternode today and received my coins today.

The dev is very friendly and helpful and you can tell based on the white paper they truly believe in their project.

I'm rooting for this to succeed.

I can't believe I made the mistake of not checking here first. I had used Coinhouse a few months back and it worked fine; I saw DEAL was cheaper than on ICQbase so I went ahead and purchased 0.1 BTC ($900) worth. Was deposited within 15 minutes, but when I went to withdraw, the button was greyed out/disabled and has been for approximately 12 hours now.

I submitted a support ticket and will update with what happens. I sure hope my coins weren't stolen.

Can't embed yet but why so mad bro? Don't even look over the page and jump to conclusions.


https://imgur.com/GZ69lZR



https://imgur.com/jSeS2m2