Ninjastic
Search content
Sort by
Showing 14 of 14 results by ryliou
Post
Topic
Board Computer hardware
Re: [WTS] (4X) 1 TH/s MASSIVE SAVINGS + Shipping Included! (Total 4000-5200 GH/s)
by
ryliou
on 26/03/2014, 22:44:55 UTC
Quote from: syber on March 26, 2014, 12:07:05 PM
Still willing to negotiate on the price make your best offer.

Syber

Sent you PM.
Post
Topic
Board Hardware
Re: [Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner
by
ryliou
on 26/03/2014, 04:19:16 UTC
Quote from: Biontic on March 25, 2014, 11:42:59 AM
Quote from: gjpminingco on March 23, 2014, 09:52:11 PM
what is the freq_value for the 393.75 chip freq does anyone know

        option 'freq_value'     '5f05'   #393.75M
        option 'chip_freq'      '393.75'
        option 'timeout'        '38'

Imho - this is the optimal setting, it uses marginally less power then oc'ing to 400, gives you close enough to 200GH/s and effectively means you are not paying for HW errors.
Anyboday know how to setup Antminer to use Wifi? My setup didn't work right if I pull internet cable out.
------
Network Status Actions
LAN
 ()
br-lan Uptime: 0h 0m 0s
MAC-Address:
RX: 0.00 B (0 Pkts.)
TX: 0.00 B (0 Pkts.)
     
WWAN

Client "GRK7P" Uptime: 1d 11h 25m 48s
MAC-Address:
RX: 31.46 MB (101188 Pkts.)
TX: 11.12 MB (79710 Pkts.)
IPv4: 192.168.1.191/24
     
WAN
 ()
br-wan Uptime: 1d 11h 25m 56s
MAC-Address:
RX: 24.17 MB (132310 Pkts.)
TX: 2.36 MB (10074 Pkts.)
IPv4: 192.168.1.201/24
     
 
Post
Topic
Board Computer hardware
Re: [WTS] (4X) 1 TH/s (Total 4000-5200 GH/s) HUGE SAVINGS + Shipping Included!
by
ryliou
on 26/03/2014, 02:56:34 UTC
Quote from: syber on March 26, 2014, 01:32:38 AM
Selling all 4 1 TH/s for $16k or best offer!
$1700 discount per unit.
Free shipping included
Escrow ready

Questio, why are you selling, is there any concern with the product?
Post
Topic
Board Hardware
Re: [Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner
by
ryliou
on 24/02/2014, 01:45:36 UTC
Quote from: tmwsiy on February 23, 2014, 02:32:09 PM
Quote from: palawan on February 23, 2014, 02:59:39 AM
Quote from: ryliou on February 23, 2014, 01:55:02 AM
Quote from: palawan on February 22, 2014, 08:56:42 PM
...
I configured both of my Antminer S1's from factory via wifi on my laptop (dell mini 9 netbook).  I've never directly connected to either of my Antminer to a laptop/computer.

Good luck.

Could anyone/two of you do me a favor? Take screen shot of your ipconfig output.
mine have both 192.168.2.xx by cable and 192.168.1.xx by wireless, but still can't access Miner.
The network cable head green light is not even on for Miner, the rest of PC/Laptop are all on.

I probably need to ask seller for a replacement network/control card.


I'm not running Windows.  I run Arch Linux and Linux Mint on my laptops.  And all devices on my network are  192.168.55.x  subnet now.  That includes the miners, 3 laptops, cell phones, tablets, chromecast.

At any rate, that's a problem if there's no link light on the Antminer S1.  First thing's first, you need physical connectivity before you can access the miner.

Did you connect the Antminer to your router and you're not getting a link light on the Antminer? and you're sure the cable is good?


I had a similar experience and had a moment of WTF. I just kept trying different cables until I found one that worked. It seems the female ethernet connector on the ant's do not mate up well with some connector/shield combinations on some cables.

Hi, changed 4 cables and still no light on both end of network socket.
I'm sure I need to ask Seller for replacement network/card.
Maybe the shipping without static protection caused it to short-circuit.
Post
Topic
Board Hardware
Re: [Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner
by
ryliou
on 23/02/2014, 01:55:02 UTC
Quote from: palawan on February 22, 2014, 08:56:42 PM
Quote from: ryliou on February 22, 2014, 07:37:00 PM
Quote from: ryliou on February 22, 2014, 05:23:50 AM
Quote from: Brassguy on February 22, 2014, 01:51:29 AM
...
...

Hit a roadblock, I am using Verizon FIOS internet, the router use a static IP 192.168.1.1 with subnet 255.255.255.0.
There's no way of changing router IP, nor can I change subnet to 255.255.254.0 to cover 192.168.2.xx.

Look like the new batch S1 of IP 192.168.2.99 caused Verizon FIOS customer a lots of troubles.
Router from my last Cable Company is easier to change. All with older batch S1 on 192.168.1.xx is luckier.

Direct cable connection can only works for 192.168.1.xx ONLY?

What's now, buy a new router to add 192.168.2.1 network?

I don't want to intrude in the middle, but if you want to try the steps below:

  • 1.  Connect the Antminer to your router/switch via cable
  • 2.  On a computer (laptop/PC) that is connected to the same router/switch (via cable or wifi), change the IP address of the computer to  192.168.2.55  subnet mask 255.255.255.0 gateway doesn't matter
  • 3.  Connect to the Antminer web url  192.168.2.99 and make changes
  • 4.  Change Antminer to  192.168.1.188  mask 255.255.255.0, gateway 192.168.1.1, custom dns 8.8.8.8
  • 5.  Make sure you save and apply above and wait for it to finish, sometimes needs reboot after
  • 6.  Put the computer on step 2 to normal settings (probably automatic DHCP)
  • 7.  Access Antminer web url  192.168.1.188 and set pool info

I configured both of my Antminer S1's from factory via wifi on my laptop (dell mini 9 netbook).  I've never directly connected to either of my Antminer to a laptop/computer.

Good luck.

Could anyone/two of you do me a favor? Take screen shot of your ipconfig output.
mine have both 192.168.2.xx by cable and 192.168.1.xx by wireless, but still can't access Miner.
The network cable head green light is not even on for Miner, the rest of PC/Laptop are all on.

I probably need to ask seller for a replacement network/control card.

Post
Topic
Board Hardware
Re: [Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner
by
ryliou
on 22/02/2014, 19:37:00 UTC
Quote from: ryliou on February 22, 2014, 05:23:50 AM
Quote from: Brassguy on February 22, 2014, 01:51:29 AM
Ryliou,

This is what I do... works for me....

Step 1) Go into your router and change the router ip to the same subnet as your antminer... in your case set the router ip to 192.168.2.1
Step 2) Change the DHCP address range to include 192.168.2.99... maybe a range of 192.168.2.[90-149]
Step 3) Save settings and reboot router.
Step 4) Plug in Antminer, go to it's ip... in your case 192.168.2.99 using your favorite browser... set up your pool credentials.
Step 5) Profit


Brassguy:

Thanks, I'm trying that now, will post back.

Hit a roadblock, I am using Verizon FIOS internet, the router use a static IP 192.168.1.1 with subnet 255.255.255.0.
There's no way of changing router IP, nor can I change subnet to 255.255.254.0 to cover 192.168.2.xx.

Look like the new batch S1 of IP 192.168.2.99 caused Verizon FIOS customer a lots of troubles.
Router from my last Cable Company is easier to change. All with older batch S1 on 192.168.1.xx is luckier.

Direct cable connection can only works for 192.168.1.xx ONLY?

What's now, buy a new router to add 192.168.2.1 network?

Post
Topic
Board Hardware
Re: [Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner
by
ryliou
on 22/02/2014, 05:23:50 UTC
Quote from: Brassguy on February 22, 2014, 01:51:29 AM
Ryliou,

This is what I do... works for me....

Step 1) Go into your router and change the router ip to the same subnet as your antminer... in your case set the router ip to 192.168.2.1
Step 2) Change the DHCP address range to include 192.168.2.99... maybe a range of 192.168.2.[90-149]
Step 3) Save settings and reboot router.
Step 4) Plug in Antminer, go to it's ip... in your case 192.168.2.99 using your favorite browser... set up your pool credentials.
Step 5) Profit


Brassguy:

Thanks, I'm trying that now, will post back.
Post
Topic
Board Hardware
Re: [Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner
by
ryliou
on 21/02/2014, 06:45:15 UTC
Quote from: pjviitas on February 21, 2014, 05:37:18 AM

1.Unplug your laptop from your lan and change the ip settings to the same subnet as your miner.
-done
2.Plug your laptop into your miner
-done
3.Log into the miner and change the ip settings to the settings on your lan.
-My problem is at this step, media/cable unplugged and I can't ping or open miner login page.

4.plug your miner into your lan

5.change the settings on your laptop back to the subnet for your lan

6.plug your laptop back into your lan

7.log into the miner on your lan and finish the setup

I am at step 3 above, media/cable unplugged and can't connect/ping the miner.
What's next?

3a. go to network adapters -> ethernet -> ipv4 properties -> set the laptop ip as 192.168.2.201 and gateway as 192.168.2.1   connect the laptop and miner directly with a single ethernet cord. go to 192.168.2.99 in browser and then change the antminer settings

3b. remember that you may need to restart your network service to make the changes take effect...in windows this might entail a reboot

- Once done setup/reboot, type ipconfig in cmd prompt, it's always [Media disconnected], no IP/gateway info , so no way to ping Miner at 192.168.2.99, no brighter light on both end of cable, feel like connection isn't working.

Any idea?

Post
Topic
Board Hardware
Re: [Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner
by
ryliou
on 21/02/2014, 05:09:46 UTC
Quote from: pjviitas on February 21, 2014, 04:47:51 AM
Quote from: ryliou on February 21, 2014, 04:09:37 AM

----------------------------------------------------
Now my real Question.

1) My Internet Router is the default gateway 192.168.1.1, where all my PCs, Phones, TV set tops are connected to.

2) My New AntMiner has label said - 192.168.2.99, so how do I connect to it?
Do I need a 2nd router to do this?

3) If I don't need 2nd router, then if I can use the direct connection using network cable, one cable end to my PC, another end to AntMiner and both will be configured in 192.168.2.xx subnet?

Help and Thanks.

1.Unplug your laptop from your lan and change the ip settings to the same subnet as your miner.
-done
2.Plug your laptop into your miner
-done
3.Log into the miner and change the ip settings to the settings on your lan.
-My problem is at this step, media/cable unplugged and I can't ping or open miner login page.

4.plug your miner into your lan

5.change the settings on your laptop back to the subnet for your lan

6.plug your laptop back into your lan

7.log into the miner on your lan and finish the setup

I am at step 3 above, media/cable unplugged and can't connect/ping the miner.
What's next?
Post
Topic
Board Hardware
Re: [Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner
by
ryliou
on 21/02/2014, 04:09:37 UTC
Quote from: ryliou on February 21, 2014, 12:21:48 AM
Ok   IP-STB1.home   192.168.1.100         Motorola Mobility, Inc.   3C:xx:xx:xx:xx   
Ok   IP-STB2.home   192.168.1.101         Motorola Mobility, Inc. 00:xx:xx:xx:xx

I turned off my phone/tablet and those looks more like it, but IE still couldn't access both.      

Reset, those are Verizon TV Set Top Boxes.
----------------------------------------------------
Now my real Question.

1) My Internet Router is the default gateway 192.168.1.1, where all my PCs, Phones, TV set tops are connected to.

2) My New AntMiner has label said - 192.168.2.99, so how do I connect to it?
Do I need a 2nd router to do this?

3) If I don't need 2nd router, then if I can use the direct connection using network cable, one cable end to my PC, another end to AntMiner and both will be configured in 192.168.2.xx subnet?

Help and Thanks.
Post
Topic
Board Hardware
Re: [Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner
by
ryliou
on 21/02/2014, 00:21:48 UTC
Ok   IP-STB1.home   192.168.1.100         Motorola Mobility, Inc.   3C:xx:xx:xx:xx   
Ok   IP-STB2.home   192.168.1.101         Motorola Mobility, Inc. 00:xx:xx:xx:xx

I turned off my phone/tabelet and those looks more like it, but IE still couldn't access both.      
Post
Topic
Board Hardware
Re: [Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner
by
ryliou
on 20/02/2014, 21:24:34 UTC
Only my PC on 192.168.1.254 is showing up. ANy reset button on S1?

edit:
I put my PC back to my Home network and Scanned again
and got last address of IP are as below, but no Miner IP:

1. Verizon internet router
2. Cell 1
4. PC 1
100. Motorola - Iphone
101. Motorola - Tablet
254. my PC

Nothing on Miner, Still need Reset button?
Post
Topic
Board Hardware
Re: [Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner
by
ryliou
on 20/02/2014, 20:50:00 UTC
Quote from: S4VV4S on February 20, 2014, 04:39:36 PM
Quote from: ryliou on February 20, 2014, 04:35:43 PM
Help, after I setup the
IP: 192.168.2.254, Gateway:192.168.2.1, DNS:blank/or 192.168.2.1
The IE couldn't find the AntMiner by http://192.168.2.100 (on Miner).
And the Network Connection is always [Cable disconnected].

Your Antminer should be 192.168.1.100 unless you changed it.
(Actually all latest Ants ship with 192.168.1.99)

So your Ip should be 192.168.1.254, gateway 192.168.1.1
subnet 255.255.255.0

EDIT: Use Advanced IP Scanner to find the actual IPs on your network.

I followed both set up of 192.168.1.xx/192.168.2.xx, nothing happened.
Is it possible the network card coming with S1 is bad?
I have 2 light & 1 small green light blinking.
Power Supply is Corsair CX600.
Post
Topic
Board Hardware
Re: [Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner
by
ryliou
on 20/02/2014, 16:35:43 UTC
Help, after I setup the
IP: 192.168.2.254, Gateway:192.168.2.1, DNS:blank/or 192.168.2.1
The IE couldn't find the AntMiner by http://192.168.2.100 (on Miner).
And the Network Connection is always [Cable disconnected].