Search content
Sort by
Showing 20 of 83 results by s3c70r
Re: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners
I shouldn't have to set any power usage for my miners. I'm getting power usage from the firmware.
As you can see in the summary, since I'm running asicFW firmware, I have power usage for each board.
As per https://support.awesomeminer.com/support/solutions/articles/35000104685-power-consumption-and-profitability
It's very nice to have power usage per board.
I'm looking to have an easy way to get the total of all three boards. Though I could do it with a custom progress field.
The actual power usage should be displayed in the Performance column as well, so I think the reason it doesn't show up is that Awesome Miner may not be configured to show the Actual Power usage (instead of the Static values that typically are used for ASIC's).As you can see in the summary, since I'm running asicFW firmware, I have power usage for each board.
As per https://support.awesomeminer.com/support/solutions/articles/35000104685-power-consumption-and-profitability
Quote
Power consumption and profitability
Introduction
Awesome Miner can read and display the current power usage of both nVidia and AMD GPU's, independent of which mining software being used.
ASIC miners in general doesn't have any feature where they can report the power usage and for this reason Awesome Miner cannot display the actual power usage, only manually configured values for power usage together with linear power scaling based on the current hashrate.
It's currently only ASIC miners running the custom firmware AsicFW that can report power usage to Awesome Miner.
Introduction
Awesome Miner can read and display the current power usage of both nVidia and AMD GPU's, independent of which mining software being used.
ASIC miners in general doesn't have any feature where they can report the power usage and for this reason Awesome Miner cannot display the actual power usage, only manually configured values for power usage together with linear power scaling based on the current hashrate.
It's currently only ASIC miners running the custom firmware AsicFW that can report power usage to Awesome Miner.
It's very nice to have power usage per board.
I'm looking to have an easy way to get the total of all three boards. Though I could do it with a custom progress field.
Please go to the Options dialog, Profitability section, and change the "Power usage mode" to one of the Actual Usage settings.
Yes that fixed it . Thank you very much Patrike !!!
Re: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners
I shouldn't have to set any power usage for my miners. I'm getting power usage from the firmware.
As you can see in the summary, since I'm running asicFW firmware, I have power usage for each board.
As per https://support.awesomeminer.com/support/solutions/articles/35000104685-power-consumption-and-profitability
It's very nice to have power usage per board.
I'm looking to have an easy way to get the total of all three boards. Though I could do it with a custom progress field.
As you can see in the summary, since I'm running asicFW firmware, I have power usage for each board.
As per https://support.awesomeminer.com/support/solutions/articles/35000104685-power-consumption-and-profitability
Quote
Power consumption and profitability
Introduction
Awesome Miner can read and display the current power usage of both nVidia and AMD GPU's, independent of which mining software being used.
ASIC miners in general doesn't have any feature where they can report the power usage and for this reason Awesome Miner cannot display the actual power usage, only manually configured values for power usage together with linear power scaling based on the current hashrate.
It's currently only ASIC miners running the custom firmware AsicFW that can report power usage to Awesome Miner.
Introduction
Awesome Miner can read and display the current power usage of both nVidia and AMD GPU's, independent of which mining software being used.
ASIC miners in general doesn't have any feature where they can report the power usage and for this reason Awesome Miner cannot display the actual power usage, only manually configured values for power usage together with linear power scaling based on the current hashrate.
It's currently only ASIC miners running the custom firmware AsicFW that can report power usage to Awesome Miner.
It's very nice to have power usage per board.
I'm looking to have an easy way to get the total of all three boards. Though I could do it with a custom progress field.
Re: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners
Hi
It's currently only ASIC miners running the custom firmware AsicFW that can report power usage to Awesome Miner.
is there a way to see the total for each ASIC ?
I only see power for each board but no total for all three boards.
Thank you
It's currently only ASIC miners running the custom firmware AsicFW that can report power usage to Awesome Miner.
is there a way to see the total for each ASIC ?
I only see power for each board but no total for all three boards.
Thank you
Re: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners
Hello Awesomeminer,
Could you please add support for SlushPool in the pool balance ?
https://slushpool.com/help/api/
Thank you very much
Could you please add support for SlushPool in the pool balance ?
https://slushpool.com/help/api/
Thank you very much
Re: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners
Feature request please.
Antminer & Asic , in tools.
Default pools and update firmware. Please give us the option to retry failed miners.
Retry failed would be enough.
Ran into an issue where default pools would not update at all on some miners. Not sure why.
Can you make sure permissions are set to write on /config/bmminer.conf before ? Otherwise chmod it so it writeable ?
Can you please add an option to reset to factory defaults ?
Can you please add an option to clear config file upon firmware update. When you update a firmware into an asic, you have the choice to keep the original config or not.
Thanks a lot !
Antminer & Asic , in tools.
Default pools and update firmware. Please give us the option to retry failed miners.
Retry failed would be enough.
Ran into an issue where default pools would not update at all on some miners. Not sure why.
Can you make sure permissions are set to write on /config/bmminer.conf before ? Otherwise chmod it so it writeable ?
Can you please add an option to reset to factory defaults ?
Can you please add an option to clear config file upon firmware update. When you update a firmware into an asic, you have the choice to keep the original config or not.
Thanks a lot !
Re: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 10000 miners
Hi,
After applying fan fix firmware, awesomeminer doesn't show the temperature anymore for B3 miners.
https://support.bitmain.com/hc/en-us/articles/360004733393-B3-Firmware-Upgrade-Instructions
Thank you
From what I noticed a few days ago, the latest B3 firmware changed these miners from telling they are "Antminer B3" to only say "Antminer" and I think this is a bug in the firmware.After applying fan fix firmware, awesomeminer doesn't show the temperature anymore for B3 miners.
https://support.bitmain.com/hc/en-us/articles/360004733393-B3-Firmware-Upgrade-Instructions
Thank you
The latest development version (v.5.0.4) included a adjustment to this, so it should show the correct temperature readings again.
Thank you very much, it did fix the issue.
Re: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 10000 miners
Hi,
After applying fan fix firmware, awesomeminer doesn't show the temperature anymore for B3 miners.
https://support.bitmain.com/hc/en-us/articles/360004733393-B3-Firmware-Upgrade-Instructions
Thank you
After applying fan fix firmware, awesomeminer doesn't show the temperature anymore for B3 miners.
https://support.bitmain.com/hc/en-us/articles/360004733393-B3-Firmware-Upgrade-Instructions
Thank you
Re: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 10000 miners
Hi Patrik,
Even if the mining software is not running on an ASIC and it states disconnected, can you please enable the possibility to restart the asic ? It's done via ssh so it is independent from the mining software.
Thank you very much !
You can use the rules with SSH for this. Please see "Example: Reboot Antminers via a button click":Even if the mining software is not running on an ASIC and it states disconnected, can you please enable the possibility to restart the asic ? It's done via ssh so it is independent from the mining software.
Thank you very much !
http://www.awesomeminer.com/help/rules.aspx
Works perfectly ! Thank you very much !
Re: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 10000 miners
Hi Patrik,
Even if the mining software is not running on an ASIC and it states disconnected, can you please enable the possibility to restart the asic ? It's done via ssh so it is independent from the mining software.
Thank you very much !
Even if the mining software is not running on an ASIC and it states disconnected, can you please enable the possibility to restart the asic ? It's done via ssh so it is independent from the mining software.
Thank you very much !
Re: zPoolMiner Gui Mining Software for zpool.ca Version 1.9.0.1 - Released
12 minutes per hour is 20% a day that goes for the dev.
LOL, just use awesomeMiner which is free to use. It has all the bells and whistles + many more features.
LOL, just use awesomeMiner which is free to use. It has all the bells and whistles + many more features.
Re: [Awesome Miner]- Powerful Windows GUI to manage and monitor up to 5000 miners
For me, DSTM 0.5.8, miner kills itself a few seconds after it launches
Tested on Miningpoolhub
Tested on Miningpoolhub
You have the same issue as I was having. View my work around in my previous post.
Re: [Awesome Miner]- Powerful Windows GUI to manage and monitor up to 5000 miners
Bug since I've updated to latest version.
Starting Diagnostics. Awesome Miner version: 4.3.3
Starting Mining Software
Setting up Miner Engine. Instance: 1
Engine Type: DstmMiner, Auto Download: True, EnginePath: , Subtype: Disabled, CustomExecutable:
Added rule for: C:\Users\Rig02\AppData\Roaming\AwesomeMinerService\zm_0.5.8_win_1\zm_0.5.8_win\zm.exe
C:\Users\Rig02\AppData\Roaming\AwesomeMinerService\zm_0.5.8_win_1\zm_0.5.8_win\zm.exe --server us-east.equihash-hub.miningpoolhub.com --port 17023 --user s3c70r --pass x --telemetry=0.0.0.0:4028 (WindowMode: ConsoleFormat, EngineType: DstmMiner, IsProfitMiner: True)
Configuration:
Mining Engine Process started, PID: 3068
====================================================================================================
> # zm 0.5.8
> # GPU0 + GeForce GTX 1070 MB: 8192 PCI: 1:0
> # GPU1 + GeForce GTX 1070 MB: 8192 PCI: 2:0
> # GPU2 + GeForce GTX 1070 MB: 8192 PCI: 4:0
> # GPU3 + GeForce GTX 1070 MB: 8192 PCI: 5:0
> # GPU4 + GeForce GTX 1070 MB: 8192 PCI: 6:0
>
> # telemetry server started
> # connected to: us-east.equihash-hub.miningpoolhub.com:17023
> authorization failed
====================================================================================================
Unexpected exit of mining software. Possible cause: Incorrect configuration
Diagnostics completed
--user s3c70r , even if in the properties I have "Add to workername" checked, it doesn't pass the workername to command line.
We should read --user s3c70r.Rig02
Miningpoolhub doesnt allow connections without a login followed by a workername. ( login.Workername )
I have a s3c70r.Rig01 defined globally in the profit switching section of options to work around the bug.
Please fix ASAP.
Starting Diagnostics. Awesome Miner version: 4.3.3
Starting Mining Software
Setting up Miner Engine. Instance: 1
Engine Type: DstmMiner, Auto Download: True, EnginePath: , Subtype: Disabled, CustomExecutable:
Added rule for: C:\Users\Rig02\AppData\Roaming\AwesomeMinerService\zm_0.5.8_win_1\zm_0.5.8_win\zm.exe
C:\Users\Rig02\AppData\Roaming\AwesomeMinerService\zm_0.5.8_win_1\zm_0.5.8_win\zm.exe --server us-east.equihash-hub.miningpoolhub.com --port 17023 --user s3c70r --pass x --telemetry=0.0.0.0:4028 (WindowMode: ConsoleFormat, EngineType: DstmMiner, IsProfitMiner: True)
Configuration:
Mining Engine Process started, PID: 3068
====================================================================================================
> # zm 0.5.8
> # GPU0 + GeForce GTX 1070 MB: 8192 PCI: 1:0
> # GPU1 + GeForce GTX 1070 MB: 8192 PCI: 2:0
> # GPU2 + GeForce GTX 1070 MB: 8192 PCI: 4:0
> # GPU3 + GeForce GTX 1070 MB: 8192 PCI: 5:0
> # GPU4 + GeForce GTX 1070 MB: 8192 PCI: 6:0
>
> # telemetry server started
> # connected to: us-east.equihash-hub.miningpoolhub.com:17023
> authorization failed
====================================================================================================
Unexpected exit of mining software. Possible cause: Incorrect configuration
Diagnostics completed
--user s3c70r , even if in the properties I have "Add to workername" checked, it doesn't pass the workername to command line.
We should read --user s3c70r.Rig02
Miningpoolhub doesnt allow connections without a login followed by a workername. ( login.Workername )
I have a s3c70r.Rig01 defined globally in the profit switching section of options to work around the bug.
Please fix ASAP.
Re: [Awesome Miner]- Powerful Windows GUI to manage and monitor up to 5000 miners
Region variable does not get passed... Had to add us-east manually to be able to connect.
https://preview.ibb.co/b6htc6/zcoin.png
https://preview.ibb.co/b6htc6/zcoin.png
Will this be fixed in next release ?
Also, Unspecified Lyra2z doesn't show any income.
I can see the value in online services and in the profit details but no value in the coin column of miners.