Search content
Sort by
Showing 20 of 20 results by savs
im used 10x gtx 1080ti produce 56usd per day
What are you mining ?
Re: [POOL] YAAMP.COM multipool multialgo profit switch with exchange
has xvg been removed from pool?
Read the twitter news at yiimp pool.
The question is what will happend with all the earning during the last night, because they were not paid ?
Also i just see that the last transaction is tx: fed621f29b9b0fe3da72a0ba72ab7ff8f536e8d9886a84cec14d1203a0d3e179 and it does not appear in the xvg explorer. This means that there is one payment witch is consider done by the pool but actually is not. So what will happen with this payment also
Re: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.
Admin almost 7 hours with this problems! It is time to say something. If this continue for another hour or two i will most likely permanently move to another pool!
Re: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.
Looks like ZCL balances are moving again.
Yes , now it is running
Re: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.
Zclassic pool is working. But with the bug yesterday with auto-transactions I did notice some of my Zclassic coins get moved to the auto exchange wallet. Luckily, my autoexchange wallet is Zclassic. But trying to move them back into the normal Zclassic wallet isn't working when I push the "left arrow" button. They appear to be stuck on the autoexchange wallet.
My balance is not updated in at least 3 hours
Re: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.
zcl Account Information and Recent Credits does not work ... they stay for more then a hour or two without changing but i can see that there are new transactions incoming in transactions menu
Re: [POOL] YAAMP.COM multipool multialgo profit switch with exchange
My last Verge-payment 77 minutes ago didn't arrive in my wallet and there is no transaction-id. It shows only "...".
What now? Waiting?
What now? Waiting?
i have the same problem
Re: Seuntjies DiceBot -Multi-Site, multi-strategy betting bot for dice. With Charts!
You can reset seeds from web but they did again something with their API and when u try to change the seed it tells you that the access_token param is wrong no matter that I used the same token to make a bets and there it works. Bitsler support told me that this feature works but actually it does not at this stage. There is something wrong and the seed for bitsler cannot be change at this point from bot but only from the site. I will check again tomorrow if Bitsler team decides to fix this, but i have my doubts.
43.6 mhs at 175whttps://www.youtube.com/watch?v=lIvy0vMNk4A
next couple month we'll see 50++ at low power
dual mining dcr almost 3ghs, nice profit then, not suprise vega out of stock, some ppl bought ton of them
Good lord hes getting that hash mining UBIQ not Ethereum!
The algo is the same
Come on. This is obviously fake.
Bitmain didnt sell any L3+ Antminers in the last few days.
So your story is total bullshit.
Bitmain didnt sell any L3+ Antminers in the last few days.
So your story is total bullshit.
i was order it in 15/7
and i have the order id in website . and i have an email from bitmain it's shows the bank details and show the deadline to pay.
also the buyer will didn't pay anything before see the email from bitmain with all details .
so no any fake in this post .
Thank you.
It is interesting to me what will stop you to change delivery address again once the order is payed from someone else ?
1. Dont unplug and plug cards while the system is on
2. Remove some other card and connect the 6th card. Run the miner and if it last no more then 2 hours then the riser of your 6th card is broken.
2. Remove some other card and connect the 6th card. Run the miner and if it last no more then 2 hours then the riser of your 6th card is broken.
its prolly the psu guy, 1200w would barely be enough, I have an amd rig that does the same kinda with 6 gpus, windows ends up totally freezing up, considering the rig is really dependent on one thing! power
first off msi afterburner isn't accurate on what it tells you as far as the power the gpu is consuming, its only accounting for part of the gpu
secondly seems you have forgot to account for the power the motherboard needs along with an additional 20 percent to account for power spikes from initial startups of the gpus and stuff
here is a little basic math 1000w/6 gpus is around 166.6 w per gpu
which might I add you didn't actually say if that 1000w was of the whole rig or just the gpus
now if that's whole rig id say bump that down to around 142.8w to account for the power the motherboard takes which could be an upwards of up to 150watts
risers also need power too
with just the info you've already said I would have to say its the psu being not sufficient, get a 1500w psu
first off msi afterburner isn't accurate on what it tells you as far as the power the gpu is consuming, its only accounting for part of the gpu
secondly seems you have forgot to account for the power the motherboard needs along with an additional 20 percent to account for power spikes from initial startups of the gpus and stuff
here is a little basic math 1000w/6 gpus is around 166.6 w per gpu
which might I add you didn't actually say if that 1000w was of the whole rig or just the gpus
now if that's whole rig id say bump that down to around 142.8w to account for the power the motherboard takes which could be an upwards of up to 150watts
risers also need power too
with just the info you've already said I would have to say its the psu being not sufficient, get a 1500w psu
Guys when im talking in wats , im talking in a wats from the wall for the hole system. So i still need a better suggestions.
Hello guys ... need some help or directions
My configuration:
Motherboard: Asus Prime H270-Plus
GPU: Asus GTX 1070 DUAL 08G x 6
PSU: Gigabyte XP1200M - 1200 w 80 plus platinum
SSD: 128 Gb ADATA
RAM: HyperX Fury 8 gb DDR4
OS: Win 10 Pro
I have installed all the latest drivers + CUDA
All cards are on power risers VER 006C
So far so good, but ... when i try to mine with EWBF or Nicehash miners it does not take too long for the rig to reboot.
I`m using MSI afterburner in order to over/downclock the cards.
I try them one by one and they work very well ... i can get 470+ sols/s per card, but when i put them all together they are starting to crash the configuration. Everything is fine with 4 cards , but when i add 1 more and the reboot repeats. First i taught that the problem is in the PSU, but i try ETH mining with huge overclock and i was near 1000 W and it was running ok. After that i underclock and start zcash mining and until it gets 800 w it is ok ... after that it starts to crash. If i underclock all the cards and set the power limit to 70% for example it works. I think it also worked for 75% of the power limit ... after that it crash. For ETH i set the power limit to 98% for all cards and still no problem.... no crash... so from here i just decide that the PSU is not the problem. Also the cards when tested one by one are not crashing. The temperature of the cards is not more then 70 C ... usually 65 C. The temp of the CPU was under 45C.
I`m really out of ideas. It will be nice if someone can help me with this. If i forgot some information pls ask
My configuration:
Motherboard: Asus Prime H270-Plus
GPU: Asus GTX 1070 DUAL 08G x 6
PSU: Gigabyte XP1200M - 1200 w 80 plus platinum
SSD: 128 Gb ADATA
RAM: HyperX Fury 8 gb DDR4
OS: Win 10 Pro
I have installed all the latest drivers + CUDA
All cards are on power risers VER 006C
So far so good, but ... when i try to mine with EWBF or Nicehash miners it does not take too long for the rig to reboot.
I`m using MSI afterburner in order to over/downclock the cards.
I try them one by one and they work very well ... i can get 470+ sols/s per card, but when i put them all together they are starting to crash the configuration. Everything is fine with 4 cards , but when i add 1 more and the reboot repeats. First i taught that the problem is in the PSU, but i try ETH mining with huge overclock and i was near 1000 W and it was running ok. After that i underclock and start zcash mining and until it gets 800 w it is ok ... after that it starts to crash. If i underclock all the cards and set the power limit to 70% for example it works. I think it also worked for 75% of the power limit ... after that it crash. For ETH i set the power limit to 98% for all cards and still no problem.... no crash... so from here i just decide that the PSU is not the problem. Also the cards when tested one by one are not crashing. The temperature of the cards is not more then 70 C ... usually 65 C. The temp of the CPU was under 45C.
I`m really out of ideas. It will be nice if someone can help me with this. If i forgot some information pls ask
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v7.4 (Windows/Linux)
Hello mr. Claymore.
I have a problem with the miner. From time to time it stops and it doesn't restarts itself after the "Miner thread hangs, need to restart miner!". If i press 's' for the statistics then the miner start the restart procedure, but until then just nothing. I had this happen twice today. I'm running:
Win 10 pro x64
Intel i7 - 6700k
8 gb ddr4 ram
Power Color RX 480 - Red Devil (with modded bios and underclocked) (just 1 card)
I'm attaching the 2 log files. Hope that they will help you.
I think in this point of view the watchdog is not working correctly, because it is taking action only when 's' is pressed.
Thank you. Hope you can help me.
https://www.dropbox.com/s/2nmzpgrnmaw1c6t/1485500195_log.txt?dl=0
https://www.dropbox.com/s/t26a0a37d69gxvj/1485524631_log.txt?dl=0
I have a problem with the miner. From time to time it stops and it doesn't restarts itself after the "Miner thread hangs, need to restart miner!". If i press 's' for the statistics then the miner start the restart procedure, but until then just nothing. I had this happen twice today. I'm running:
Win 10 pro x64
Intel i7 - 6700k
8 gb ddr4 ram
Power Color RX 480 - Red Devil (with modded bios and underclocked) (just 1 card)
I'm attaching the 2 log files. Hope that they will help you.
I think in this point of view the watchdog is not working correctly, because it is taking action only when 's' is pressed.
Thank you
. Hope you can help me.https://www.dropbox.com/s/2nmzpgrnmaw1c6t/1485500195_log.txt?dl=0
https://www.dropbox.com/s/t26a0a37d69gxvj/1485524631_log.txt?dl=0