Search content
Sort by

Showing 20 of 97 results by shadowelite
Post
Topic
Board Mining (Altcoins)
Re: Innosilicon A4+ setup tutorial
by
shadowelite
on 24/07/2018, 22:59:59 UTC
hi I need some help
I got an a4+ g19 and one board went down
so I downgraded firmware working fine all 4 worked,
changed pools a few days later and it came up with 3 boards again
so i reflushed as image and now i have issue
i cant re flush any image even latest one
its stuck on 15%
also in the settings it says its g9 but before it said g19 and board says g19
any ideas?
only flushed .bin , no sd card slot on mine
can i flash via telnet?
thanks
Post
Topic
Board Mining support
Re: Antminer s9 hashing at 9th help
by
shadowelite
on 08/06/2018, 16:40:52 UTC
Have you tried using a different power supply / power circuit? Usually I've seen that there is a power issue when all the boards work fine individually but not together.

Yep also tried a other psu
Got a few 1600w ones incl original bitmain which is what im using atm
Will try again later with a generic one
Post
Topic
Board Mining support
Re: Antminer s9 hashing at 9th help
by
shadowelite
on 08/06/2018, 14:43:40 UTC
Some chips could be failing.
Check the chips.

How do i check the chips
I thought once one chip failed on the hashboard the hole hashboard dies as its a chain or somethibg
Plus the hashboard works perfect at full speed when its the only one connected
Post
Topic
Board Mining support
Re: Antminer s9 hashing at 9th help
by
shadowelite
on 07/06/2018, 21:48:27 UTC
Bit of an update
I was running the miner with just chain 6 and 7 and 8 wasnt hashing
I have had the miner off for the last 3 weeks and today i turned it back on
But before i turned the miner on i took all the hashboards out to c if theres any damage and they look fine
This time i only connected and powered on chain 8 the one that wasnt working and to it started hashing fine at 4.5ghz so left it hashing for an hour and workd fine with only 3 hw and tenp at 68
So thought wow it magicaly fixed it self
Powered off
Connected chain 6 and 7
Powered on
13.5gh wow
Worked for 15 min and back down to 9gh with chain 8 not having any hashing u der gh/s (rt)
Surely it cant be the hashboard if it works fine hashing by it self?
I tried another psu before and it didnt fix the problem
Could it b the controller?
Post
Topic
Board Mining support
Re: Antminer s9 hashing at 9th help
by
shadowelite
on 10/05/2018, 20:57:21 UTC
i now just swapped the ribbons (basically crossed them)  at the hashing board end
When i did the middle one and the left one ( nearest to the psu plug on controller board) chain8 still failed
So i then swapped middle and first so crossed and a board has failed but failed when i left home
So will know when i get home
Im not good at explaining things lol
Post
Topic
Board Pools
Re: [145+PH] KanoPool kano.is 7 BTC giveaway 🐈 US,UK,JP,NYA,DE,SG
by
shadowelite
on 10/05/2018, 19:58:26 UTC
Y know, ya'all had best continue this support query in the thread started in the support section https://bitcointalk.org/index.php?topic=3712806.0
I rather expect Kano will be removing these as very OT... That and the fact that being in the support area makes it easier for folks to find info on these HW support issues.
i understand what u saying and yea kano WILL delete my posts i know that but at the end off the day im trying to add 4th back to the pool (i know its not a lot but every th matters)  and people here have given me options and ideas that havent been givien in my other post
So if this works i will update the other post
No real harm actually done  except from waisting kanos time lol
Post
Topic
Board Pools
Re: [145+PH] KanoPool kano.is 7 BTC giveaway 🐈 US,UK,JP,NYA,DE,SG
by
shadowelite
on 10/05/2018, 19:41:35 UTC
Guys quick question
One of my s9 boards has stopped hashing
Any ideas? Changed psu
Recently changed fan
https://imgur.com/gallery/pFF9s0t
Kernal isnt showing any problems
Need the 4th back up and running
Obv mining on kano.is but posted in a sub category on this website
try to reboot the miner
Done a few times also changed psu as i thought maybe psu was faulty

Re-set to factory settings and if that doesn't fix it, upgrade the firmware.




Yep, try this first. 
updated firmware even tho i had upto day firmware no change
It starts mining at 13.5th but after a few min one of the boards drops
I crossed the ribbons to c if its a faulty board or main board cant think of names atm but had to go work so wont know now tfor 12h
So stuck at mining at 9th for now 😢

Did you re-set to factory settings first before updating firmware? I have had this issue with 2 miners in the past and have managed to fix it by resetting to factory, letting it run for a couple of hours and then upgrading the firmware. In that order.
no just updated firmware
Cool will try that when i finish work
Reset to factory settings
Gonna let it run for a few hour then update firmware
Post
Topic
Board Pools
Re: [145+PH] KanoPool kano.is 7 BTC giveaway 🐈 US,UK,JP,NYA,DE,SG
by
shadowelite
on 10/05/2018, 19:40:20 UTC
Guys quick question
One of my s9 boards has stopped hashing
Any ideas? Changed psu
Recently changed fan
https://imgur.com/gallery/pFF9s0t
Kernal isnt showing any problems
Need the 4th back up and running
Obv mining on kano.is but posted in a sub category on this website
try to reboot the miner
Done a few times also changed psu as i thought maybe psu was faulty

Re-set to factory settings and if that doesn't fix it, upgrade the firmware.
what fan do you have that it shows 18,120 revolutions?


Yep, try this first. 
updated firmware even tho i had upto day firmware no change
It starts mining at 13.5th but after a few min one of the boards drops
I crossed the ribbons to c if its a faulty board or main board cant think of names atm but had to go work so wont know now tfor 12h
So stuck at mining at 9th for now 😢
what fan do you have that it shows 18,120 revolutions?
Replacement fan off ebay but it goes back down to 6200 i think
Post
Topic
Board Pools
Re: [145+PH] KanoPool kano.is 7 BTC giveaway 🐈 US,UK,JP,NYA,DE,SG
by
shadowelite
on 10/05/2018, 16:48:32 UTC
Guys quick question
One of my s9 boards has stopped hashing
Any ideas? Changed psu
Recently changed fan
https://imgur.com/gallery/pFF9s0t
Kernal isnt showing any problems
Need the 4th back up and running
Obv mining on kano.is but posted in a sub category on this website
try to reboot the miner
Done a few times also changed psu as i thought maybe psu was faulty

Re-set to factory settings and if that doesn't fix it, upgrade the firmware.


Yep, try this first. 
updated firmware even tho i had upto day firmware no change
It starts mining at 13.5th but after a few min one of the boards drops
I crossed the ribbons to c if its a faulty board or main board cant think of names atm but had to go work so wont know now tfor 12h
So stuck at mining at 9th for now 😢
Post
Topic
Board Mining support
Re: Antminer s9 hashing at 9th help
by
shadowelite
on 10/05/2018, 15:42:39 UTC
What i did was remove both ends of ribbon so
Slot 1 hash board 1 cable went into 2
2 went into 3
3 went into 1
If that makes Sence?
What i also did was re install firmware
Had the latest firmware anyway but once flashed miner started mining fine at 13.5th but after 2 min the board dropped same one as in pic

I did not look in the kernal log when the falut first happened but if i look now theres no errors all boards r fine
Post
Topic
Board Mining support
Re: Antminer s9 hashing at 9th help
by
shadowelite
on 10/05/2018, 15:26:04 UTC
Ok so i have a dead board then?
Thought maybe it would have xxxx to indicate its dead or just not show up
Post
Topic
Board Mining support
Re: Antminer s9 hashing at 9th help
by
shadowelite
on 10/05/2018, 15:11:02 UTC
Don't suppose that you tried any of the usual troubleshooting things like moving one end the ribbon cable feeding the bad board to a different board to find out if it is the controller or hash board? If the same channel stays bad - is controller or ribbon cable that's bad. If problem moves to the other channel board is shot.

Oh, and don't bother redacting worker names/addresses. That info is useless to hackers. Afraid someone is going to point their miners at it and throw more hash rate there for you?
Swapped ribbons and same board is showing no hashing but has frequency and ideal ghz just not hashing
So its could b controller ?
Post
Topic
Board Pools
Re: [145+PH] KanoPool kano.is 7 BTC giveaway 🐈 US,UK,JP,NYA,DE,SG
by
shadowelite
on 10/05/2018, 15:03:57 UTC
Guys quick question
One of my s9 boards has stopped hashing
Any ideas? Changed psu
Recently changed fan
https://imgur.com/gallery/pFF9s0t
Kernal isnt showing any problems
Need the 4th back up and running
Obv mining on kano.is but posted in a sub category on this website
try to reboot the miner
Done a few times also changed psu as i thought maybe psu was faulty
for what reason have you changed the power supply? if possible then change the power supply accordingly
I swapped psu because i thought it might had been a psu problem but its not
Just swapped the ribbons around that connect the boards to the main board c if that makes a diffrance
Post
Topic
Board Pools
Re: [145+PH] KanoPool kano.is 7 BTC giveaway 🐈 US,UK,JP,NYA,DE,SG
by
shadowelite
on 10/05/2018, 14:48:45 UTC
Guys quick question
One of my s9 boards has stopped hashing
Any ideas? Changed psu
Recently changed fan
https://imgur.com/gallery/pFF9s0t
Kernal isnt showing any problems
Need the 4th back up and running
Obv mining on kano.is but posted in a sub category on this website
try to reboot the miner
Done a few times also changed psu as i thought maybe psu was faulty
Post
Topic
Board Mining support
Re: Antminer s9 hashing at 9th help
by
shadowelite
on 10/05/2018, 14:48:11 UTC
Don't suppose that you tried any of the usual troubleshooting things like moving one end the ribbon cable feeding the bad board to a different board to find out if it is the controller or hash board? If the same channel stays bad - is controller or ribbon cable that's bad. If problem moves to the other channel board is shot.

Oh, and don't bother redacting worker names/addresses. That info is useless to hackers. Afraid someone is going to point their miners at it and throw more hash rate there for you?
i have always seen people cover it up so thought why not lol
I have tried moving the ribbon cables but not disconnected any of them
Will c if i can swap the ribbon cables then
Post
Topic
Board Pools
Re: [145+PH] KanoPool kano.is 7 BTC giveaway 🐈 US,UK,JP,NYA,DE,SG
by
shadowelite
on 10/05/2018, 14:33:25 UTC
Guys quick question
One of my s9 boards has stopped hashing
Any ideas? Changed psu
Recently changed fan
https://imgur.com/gallery/pFF9s0t
Kernal isnt showing any problems
Need the 4th back up and running
Obv mining on kano.is but posted in a sub category on this website
Post
Topic
Board Mining support
Antminer s9 hashing at 9th help
by
shadowelite
on 10/05/2018, 13:49:26 UTC
Hi guys my s9 been hashing fine at 13.5th for the ladt few months but last night one of the boards has stopped hashing
Theres no x and the board is showing up
I swapped psu’s with a working one but it only fix’s the prob temp starts at 13.5 th then goes back down to 9th
Any ideas?
https://imgur.com/gallery/pFF9s0t

Thanks
Post
Topic
Board Pools
Re: [145+PH] KanoPool kano.is 7 BTC giveaway 🐈 US,NL,JP,NYA,DE,SG
by
shadowelite
on 18/04/2018, 15:13:25 UTC
Fook all the haters
Kano for life hahahhaha
Post
Topic
Board Pools
Re: [145+PH] KanoPool kano.is 7 BTC giveaway 🐈 US,NL,JP,NYA,DE,SG
by
shadowelite
on 18/04/2018, 15:12:15 UTC
Aanother block woooo 3 in a row baby
Post
Topic
Board Pools
Re: [145+PH] KanoPool kano.is 7 BTC giveaway 🐈 US,NL,JP,NYA,DE,SG
by
shadowelite
on 18/04/2018, 10:43:21 UTC
Blobk again 2 in 32min wooo