I would like to see the hashrate as a timredminer. Is it possible? I was able receive more than 520 hashes on the RX550 on XMR. But I have never seen more than 470 hashes on SRB-miner.
my rig just freezes and reboots with the new version 1.8.0...cards are rx550. it works fine with 1.7.9
Give more info, "just freezes" isnt too much info, you must admit that..
already tried new version on 2 my rigs, all are on rx550s, i edit v4 to v8 in start.bat, miner starts, compiles kernels but then just freezes and rig goes to reboot...should i edit something else except v4>v8 ?? i have 18.6.1&18.5.2 radeon drivers and win10 1803.
Try setting up gpu's with gpu_conf by hand, maybe you need to use lower intensity values than the auto setup gives.
Yes its true,system freezes, same thing to me using rx550 2GB, i have also rx550 4GB and works fine, maybe 2GB Gpu's are out.
Use 27 intensity in config. If you start SRB on RX550 with auto setup, miner gives 29 intensity. Thats too much for RX550 2gb. This is the reason why rig freezes and goes to reboot.
what hashrate is given by card 552 on an algorithm cn-gpu?
my hashrate - 182, it seems as there has to be more
Sorry, but RX500 very weakly for cn-gpu. This algo need more powerful gpu chip, but no need memory. Memory can be reduced to 300 megahertz without loss of performance.
We have forked to CN-HOSP successfully. Thank you for your support. The explorer was updated with online pools. Let us know if you run new pool according to our algo and util repo
Loving this SRBMiner. I find that using the Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23 drivers I get a little more h/s
It might work for you, just for info peeps
If you use the calculation mode for the recommended drivers, you will get the same hashrate. Fortunately, the old driver Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23 still works perfectly and does not require additional settings.
These are the claymore commands: -ttli 80 -tstop 85 -tt 60 -fanmin 50 -fanmax 85 -powlim -10 -cclock 1020 -mclock 1890 -cvddc 810 -mvddc 810
How do I do claymore commands in the same way for srbminer?
Thanks in advance for your help.
Use parameters "off_temperature", "target_fan_speed", "off_temperature" in CONFIG.TXT for temperature control. Downvolting parameters cannot be used in this miner. Use MSI Afterburner. If you use AMD you can change the bios parameters using the polaris bios editor and flash the bios.
Hello everybody,can someone explain how to start LOUD miner,what problem is ,when start miner after 1 second miner shutdown ?
yesterday you say LOUD miner is best and not use srb miner. today you say LOUD miner down after 1 sec
BEST miner dead in 1 sec?
open topic for best miner and go out and ask DEV LOUD miner why miner work BEST 1 sec . This is srb miner topic or go in Tetris topic and ask him- tetris is best game ever and you ask why yuour best miner ever work best only 1 sec
LIVADA
Where is topic when I say LOUD miner is best miner,I dont know what you talking about.
sory my mistake . the other man said
LOUD Miner working fine with only webchain algo. I hope SRB fix bugs with webchain and do better.
on srb 1.7.4 webchain work beter i try and i have 200 hr more per card on srb miner and work fine 5 day without any error
Please do not compare the local hashrate and hashrate on the pool. SRB miner shows more, but pool hashrate is 2 times lower than LOUD miner. Check again, please. And show screenshot of the pool, not a local hashrate of your rig. I really want to believe that a respected SRB-developer will fix his miner's flaws and we will see a good hashrate on the pool too. Good luck.
no problem but you first send SS (on srbminer and other miner) for your hr on pool and miner. If you use shit/cheters pool this is your prolbem not my. i have hr on miner and pool identical.
Please provide a screenshot of the pool and maybe I will believe that the SRB is the best webchain miner. Words mean nothing.
Hello everybody,can someone explain how to start LOUD miner,what problem is ,when start miner after 1 second miner shutdown ?
yesterday you say LOUD miner is best and not use srb miner. today you say LOUD miner down after 1 sec
BEST miner dead in 1 sec?
open topic for best miner and go out and ask DEV LOUD miner why miner work BEST 1 sec . This is srb miner topic or go in Tetris topic and ask him- tetris is best game ever and you ask why yuour best miner ever work best only 1 sec
LIVADA
Where is topic when I say LOUD miner is best miner,I dont know what you talking about.
sory my mistake . the other man said
LOUD Miner working fine with only webchain algo. I hope SRB fix bugs with webchain and do better.
on srb 1.7.4 webchain work beter i try and i have 200 hr more per card on srb miner and work fine 5 day without any error
Please do not compare the local hashrate and hashrate on the pool. SRB miner shows more, but pool hashrate is 2 times lower than LOUD miner. Check again, please. And show screenshot of the pool, not a local hashrate of your rig. I really want to believe that a respected SRB-developer will fix his miner's flaws and we will see a good hashrate on the pool too. Good luck.
Hello everybody,can someone explain how to start LOUD miner,what problem is ,when start miner after 1 second miner shutdown ?
yesterday you say LOUD miner is best and not use srb miner. today you say LOUD miner down after 1 sec
BEST miner dead in 1 sec?
open topic for best miner and go out and ask DEV LOUD miner why miner work BEST 1 sec . This is srb miner topic or go in Tetris topic and ask him- tetris is best game ever and you ask why yuour best miner ever work best only 1 sec
LIVADA
Where is topic when I say LOUD miner is best miner,I dont know what you talking about.
sory my mistake . the other man said
LOUD Miner working fine with only webchain algo. I hope SRB fix bugs with webchain and do better.
No, i won't do anything with Webchain anymore. Please use the allmighty LOUD miner (xmrrig fork) instead.
Thank you for your concern. Due to your inaction, webchain difficulty does not rise and it is more profitable for several months, unlike other Cryptonight algorithms. I hope in the next updates you will remove the webchain algorithm from SRB.
Hello everybody,can someone explain how to start LOUD miner,what problem is ,when start miner after 1 second miner shutdown ?
yesterday you say LOUD miner is best and not use srb miner. today you say LOUD miner down after 1 sec
BEST miner dead in 1 sec?
open topic for best miner and go out and ask DEV LOUD miner why miner work BEST 1 sec . This is srb miner topic or go in Tetris topic and ask him- tetris is best game ever and you ask why yuour best miner ever work best only 1 sec
LIVADA
Where is topic when I say LOUD miner is best miner,I dont know what you talking about.
sory my mistake . the other man said
LOUD Miner working fine with only webchain algo. I hope SRB fix bugs with webchain and do better.
LOUD miner works better. SRB miner not for webchain. Do not use SRB, if you want a stable hashrate. I have 2000 h/s with my 5xRX550, but after 2 hours rig show 1600 h/s and after 5 hours rig froze. With LOUD miner my rig works fine for weeks without hanging. I think the algorithm doesn't work correctly with SRB miner.