I haven't figured out how to change it. I've tried + and - keys from both places of the keyboard with no change.

Not sure if this affects intensity but

For me it's just a single Vega 56 alone right on pcie 16x. Dual "monitor" setup(144hz freesync + 60hz tv).

Asus Prime B350 Plus / Ryzen 1600 / Win10 Pro 1809(Os Build 17763.194, should be latest) / 2x4GB 3000mhz and 16000MB virtual memory on Samsung EVO850 SSD / CN 16+14(tried few others but no change other than hash speed decreased)

Just ran teamred for the night as I wasn't using the PC; otherwise it works wonderfully except the system lag.

Well I tried automatic functions like undervolt, oc gpu and oc memory but the increased hashrate is from the same manual settings I used before(just used wattman this time instead of overdriventool). Now I just don't need powertable regfile for it. You need to pick one from the automatic options and I just rather do undervolt + oc memory at once so manual works for me better. Also automatic oc never did over 800mhz on memory(it's max value on default settings but with manual one can adjust like before) and I rather have 900mhz at least. There are two memory timing levels but too busy to test them out now(wouldn't know if it could crash and no time for that).

EDIT: Both memory timing levels give a bit better hashrate for me than default value "Automatic". First tier a bit better, very very little. Tried every other gpu miner I know there is and no OS lag(whole windows and videos) with any of them. I hope this is something that can be fixed within teamred so I can go back to it.

New AMD gpu drivers are out and with so many new things I just gotta use them. So far mining speed on teamred seems to be a bit better and now one can undervolt well enough without registery powertables.. Not sure if the combination of new drivers + teamred or just teamred but whole system seems to be laggy while mining. It wasn't before Probably need new CN-values.

Release notes https://www.amd.com/en/support/kb/release-notes/rn-rad-win-18-12-2
Download as usual.

Sapphire Pulse Vega 56 & Cryptonight V8 algo.

Just to notify; on Vega 56 Sapphire Pulse I get the same hashrate as with vega64 bios with the latest driver. Not saying it's good but it's not worse than recommended ones for mining.

Thank you for the new version! 

Ok so just installed new Radeon 18.8.1 drivers.

Was using 18.7.1 drivers before with SRBMiner 1.6.4 as I play games on this system as well and wanted to use latest drivers for that. 1.6.5 gives slower speed on that driver(which is obvious as it wasn't recommend to use with it).

So now with 18.8.1 SRBMiner 1.6.5 still gives me slow speed with cryptonight but with 1.6.4 I get +10H/s higher hashrate with RX580. No changes for Vega 56.

Hmm. This is weird. Just reinstalled Win10 fresh, removed compiled kernels and launched the SRBMiner but now it reports both cards as Vega  


This is Vega 56 + RX580 setup. Even used DDU to remove stock drivers before installing latests.

Even compiled kernel files looks like this https://i.imgur.com/n1IJgwp.jpg

EDIT: Even more weird. I can only see RX580 with HWiNFO.
EDIT2: Forgot to put Compute mode on for RX580. Haven't tried without it so didn't know it would work like that in graphics mode.
EDIT3: After I rebooted, both showed up as Vega again even in this compute mode but this time speeds are decent and I can see both in HWiNFO. Re-ticking Compute mode makes them both get recognized again.

I already posted on Discord before but here it is
https://cdn.discordapp.com/attachments/441077179863007252/442305331280740362/IMG_20180505_154314.jpg

And here is my twitter tweet of it https://twitter.com/shagath/status/995992876818616320  

It's AMD Ryzen 1600 + Vega 56 + Strix 1060. Motherboards second longer pcie broke after that picture and also swapped nvidia to RX580(for itns hashrates <3) which waits for that new motherboard.

Now I was getting connection error. Can't really waste time not mining so back to SIGT until this is solved.

I still see nothing pending, paid or anything at kiramine but it seems to be working. Got a huge load of coins at once just now(still unconfirmed but I'm sure it will pass) to my wallet. Perhaps the site isn't updating correctly?

That's probably enough but he asked to send PM if you want to join the beta. It's in opening post. Should confirm you joining it.

I see. Thanks for the reply. I keep mining then!

Giving this kiramine pool a chance for now. So much problems with other pools.

So far with kiramine:
Last share 7min ago(seems so slow, single card) and pending balance just stays at 0(it costantly grows on other pools when they are up). It reports hashrate from my mining so it might work. No idea but I'll give it some time.

Getting this kind of error every now and then "[17:01:03][GPU0]:Invalid nonce" on the right side of the miner. 4x past 1½h. Everything works and all but just figured to post about it.

EDIT: Using this kind of command-line "cwigm -c sigt -u shgth.xxx -p xxx --lodiff --max-temp=70 --pstate=0 -d 0"(replaced private stuff with xxx). Max-temp was there by default and it's ok value so didn't remove it but added --pstate and -d.

So far so good. Getting highest hashrate out of all miners(few sp-mods and krnlx miner) that I've tested. Thanks for the beta-invite!
http://i.imgur.com/3UqmQGX.png