Search content
Sort by
Showing 20 of 144 results by slastar
CryptoKube with 34 Spondoolies SP31. Shipping container data center
http://i.imgur.com/wZcQWEF.jpg
Perfection!!
more foto http://i.imgur.com/wZcQWEF.jpg
Perfection!!
here is mine, 9Ants = 3,5kW form the wall
What kind of temps to you have in there?
Every Ant got additional fan and temps are 46-48°C. Room where Ants are placed is not too big so temps are around 25°C, but when window is opened temps drops under 20°C. Someone said they wanted to see the back of our cabinets so here we go:
https://lh5.googleusercontent.com/-DBqACRXf7cs/Uy7mKA-mMeI/AAAAAAAAHpo/DIjmGsthW8Y/w930-h1240-no/IMG_20140321_135020.jpg
Cisco 48 port switch in the middle of the rack with cable management to the left and two 30 amp 208v single phase PDUs to the right. The PDUs are switched so we have them networked to be able to reboot any PSU from anywhere in the world. All network cabling is labeled and corresponds to the ant it goes to.
Place PSU in front of AntMiner. Hot air from miner heats up PSU reducing its effectiveness and shortening its life. https://lh5.googleusercontent.com/-DBqACRXf7cs/Uy7mKA-mMeI/AAAAAAAAHpo/DIjmGsthW8Y/w930-h1240-no/IMG_20140321_135020.jpg
Cisco 48 port switch in the middle of the rack with cable management to the left and two 30 amp 208v single phase PDUs to the right. The PDUs are switched so we have them networked to be able to reboot any PSU from anywhere in the world. All network cabling is labeled and corresponds to the ant it goes to.
agree that GPU mining is not dead
here is mine (upgraded version):
how much power it's takes?
Re: [Mining OS] SimpleMining.net - Easy to use GPU MINING Operating System
Is it possible to add a second server as a failover using smos?
I just add second pool in miner option, it's working, pools are switching but pool dont see worker nameRe: [Mining OS] SimpleMining.net - Easy to use GPU MINING Operating System
Hi everyone, i have 2 problems running this OS with nvidia GPUs (1060 6GB).
Problem 1 - no GUI
I download fresh image for NV GPU, and when i start it got only text terminal. How start GUI? Running version for AMD GPUs GUI start by default.
Problem 2 - overclocking
How to downclock core? While mining ETH theres no need to GPU core run on full speed. Under Windows I set core for -400MHz and hashrate are the same like on default clock. Negative value are not allowed.
And second thing. Is there a way to turn of P2 State. To OC memory clock for 500MHz , from 4000 to 4500MHz, I need to set offest at 1400, so GPU definitly go in to P2 State and drop the clock.
Problem 1 - no GUI
I download fresh image for NV GPU, and when i start it got only text terminal. How start GUI? Running version for AMD GPUs GUI start by default.
Problem 2 - overclocking
How to downclock core? While mining ETH theres no need to GPU core run on full speed. Under Windows I set core for -400MHz and hashrate are the same like on default clock. Negative value are not allowed.
And second thing. Is there a way to turn of P2 State. To OC memory clock for 500MHz , from 4000 to 4500MHz, I need to set offest at 1400, so GPU definitly go in to P2 State and drop the clock.
anyone happen to have the original firmware for Antminer S9-B9
or some other firmware for batch 9 that isnt the new autofreq ones
i would realy appreciate it if someone could supply this
I got theseor some other firmware for batch 9 that isnt the new autofreq ones
i would realy appreciate it if someone could supply this
http://lunaticfiles.com/14yvhw5duhqo/Antminer-S9-201607131442-12.92T-600M-security.tar.gz.html
http://lunaticfiles.com/kkns5tug3n96/Antminer-S9-201607131440-14T-650M-security.tar.gz.html
Re: Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order
Ok, my S9 start working a bit better.
https://s32.postimg.org/53zy2xn91/s9_625_Mhz.png
Most important thing was set fan manualy at 90%. After this at 650Mhz get 13TH+ but with quite a lot HW errors (0,0015%). After lower frequency to 625Mh HW drop to 0.0003% and speed stabilized at 13,1TH.
Strange thing is that miner need few restarts to hashig properly, sometimes 1 board hang at 3TH and dont want speed up.
https://s32.postimg.org/53zy2xn91/s9_625_Mhz.png
Most important thing was set fan manualy at 90%. After this at 650Mhz get 13TH+ but with quite a lot HW errors (0,0015%). After lower frequency to 625Mh HW drop to 0.0003% and speed stabilized at 13,1TH.
Strange thing is that miner need few restarts to hashig properly, sometimes 1 board hang at 3TH and dont want speed up.
those chips temps are wayyyy too high my friend. your running some dangerous numbers. they should never go much higher than 70 degrees c at the chip and each day it runs like that it loses a little more life until it finally dies. if posible i would try fixing this sooner rather than later. i dont want your hardware throwin out that magic smoke.
Re: Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order
Ok, my S9 start working a bit better.
Most important thing was set fan manualy at 90%. After this at 650Mhz get 13TH+ but with quite a lot HW errors (0,0015%). After lower frequency to 625Mh HW drop to 0.0003% and speed stabilized at 13,1TH.
Strange thing is that miner need few restarts to hashig properly, sometimes 1 board hang at 3TH and dont want speed up.
Most important thing was set fan manualy at 90%. After this at 650Mhz get 13TH+ but with quite a lot HW errors (0,0015%). After lower frequency to 625Mh HW drop to 0.0003% and speed stabilized at 13,1TH.
Strange thing is that miner need few restarts to hashig properly, sometimes 1 board hang at 3TH and dont want speed up.
Re: Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order
Here's stats after 12h of mining my S9. Hashrate far below 14TH. At 650MHz hashrate was below 12TH and definitely ailing last board. Best hashrate got at 606.25MHz, 12,5Th @ 1310W from wall.
https://s31.postimg.org/nkdb9u9jv/s9_12h.png
https://s31.postimg.org/nkdb9u9jv/s9_12h.png
what is the ambient temperature in the room? I suspect that getting 14.0 th will not happen unless room is 70 f or 21.c
and that board is not sick 61c and 93c are fine
Re: Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order
Here's stats after 12h of mining my S9. Hashrate far below 14TH. At 650MHz hashrate was below 12TH and definitely ailing last board. Best hashrate got at 606.25MHz, 12,5Th @ 1310W from wall.
