Search content
Sort by
Showing 20 of 308 results by smartcrypto
Re: [ANN]⚡⚡🔐[PRiVCY]🔐⚡⚡[20th Airdrop - Starts 20th October]✅[PoW/POS]✅
I have some PRIV lying around. Is there a swap going to happen soon which I need to keep a look out for?
Yes the swap is going to happen!
Somebody bought a bunch of these. Is there a news or another website where there is active discussion?
before someone confuses this coin with the cmc joke coin 
Re: [ANN] TeamRedMiner 0.8.0 - Ethash/Kawpow/Nimiq/Etchash and More
I have about 95 mh/s on Windows with my Radeon VII, have not played much with timings as I think this quite good. But is it worth moving to Linux? If so, which one? Not sure I'm ready to pay for anyting.
which country do you buy your radeon vii?
I bought mine on Ebay, early this autum (10x). 11x was 3060 TI. It's impossible to almost buy any new gpu these days.
Re: [ANN] TeamRedMiner 0.8.0 - Ethash/Kawpow/Nimiq/Etchash and More
I have about 95 mh/s on Windows with my Radeon VII, have not played much with timings as I think this quite good. But is it worth moving to Linux? If so, which one? Not sure I'm ready to pay for anyting.
which country do you buy your radeon vii?
Re: [ANN] TeamRedMiner 0.8.0 - Ethash/Kawpow/Nimiq/Etchash and More
My stats: rx 580 30mh/s at 74w. rx 480 27,5mh/s at 62w.
Could it be possible to increase the 480 to 30mh?
Could it be possible to increase the 480 to 30mh?
58°C Fan: 2.5 Hash: 29.82 01 Ellesmere RX 480 113-1E353GU.O52 Micron
67°C Fan: 2.8 Hash: 29.82 02 Ellesmere RX 480 113-1E353GU.O52 Micron
71°C Fan: 0.3 Hash: 29.72 03 Ellesmere RX 480 115-D000PIL-100 Samsung
63°C Fan: 2.7 Hash: 30.27 05 Ellesmere RX 580 113-1E3870U-O4B Samsung
55°C Fan: 2.7 Hash: 29.82 06 Ellesmere RX 480 113-1E353GU.O52 Micron
72°C Fan: 2.3 Hash: 29.26 07 Ellesmere RX 480 115-D000PIL-100 Samsung
how to make so low power used ?
in stats i am using 110 watt each gpu
I have xfx rx 480. clock 1100 voltage 880. memory timing level 2, memory 2020 and memory voltage 870 in amd radeon settings.
Re: [ANN] TeamRedMiner 0.8.0 - Ethash/Kawpow/Nimiq/Etchash and More
"Claymore API now supported, meaning you can use EthMan to monitor TRM rigs"
not working. I use EthMan with phoenixminer works fine on local network. not with TRM.
I set --api_listen port so claymore's android monitor works but when I click "console" it fails to load the console "webpage not available"
not working. I use EthMan with phoenixminer works fine on local network. not with TRM.
I set --api_listen port so claymore's android monitor works but when I click "console" it fails to load the console "webpage not available"
Anybody has any idea how to see the console from network?
Re: [ANN] TeamRedMiner 0.8.0 - Ethash/Kawpow/Nimiq/Etchash and More
Anybody else can tell me why 0.8 wont ramp up the speeds with my 5700XT? It stays at about 11MH/s compared to 52MH/s with 0.7.22. Config is B.
You will need recent drivers to use B mode, as devs told us.
Try A mode to see if it works. If works, problem is driver too old for B mode.
how do you switch to B mode?
Adrenalin Version is 20.12.1, and it says its the most recent driver?
On A Mode, it reacher closely the same MH/s as before, without problems.
You can switch the mode between A/B/C in the .bat. Just insert --eth_config=A // B / C and it will autotune to the different modes.
B mode on polaris didnt work. dag buffer failed for 1 gpu and the other one mining at 2mh.
Anyway is there a monitoring software which works with trm? for pc.
Re: [ANN] TeamRedMiner 0.8.0 - Ethash/Kawpow/Nimiq/Etchash and More
Anybody else can tell me why 0.8 wont ramp up the speeds with my 5700XT? It stays at about 11MH/s compared to 52MH/s with 0.7.22. Config is B.
You will need recent drivers to use B mode, as devs told us.
Try A mode to see if it works. If works, problem is driver too old for B mode.
how do you switch to B mode?
Adrenalin Version is 20.12.1, and it says its the most recent driver?
On A Mode, it reacher closely the same MH/s as before, without problems.
You can switch the mode between A/B/C in the .bat. Just insert --eth_config=A // B / C and it will autotune to the different modes.
and how to specify different mode for diff gpu?
Re: [ANN] TeamRedMiner 0.8.0 - Ethash/Kawpow/Nimiq/Etchash and More
Anybody else can tell me why 0.8 wont ramp up the speeds with my 5700XT? It stays at about 11MH/s compared to 52MH/s with 0.7.22. Config is B.
You will need recent drivers to use B mode, as devs told us.
Try A mode to see if it works. If works, problem is driver too old for B mode.
how do you switch to B mode?
Re: [ANN] TeamRedMiner 0.8.0 - Ethash/Kawpow/Nimiq/Etchash and More
0.8.0 on Radeon VII -- !
That's at 285W, so 421MH/s/kW.
Code:
[2021-01-19 12:01:56] ------------------------------------------------------------------------------------------------
[2021-01-19 12:01:56] Mining ethash with 1 GPU workers
[2021-01-19 12:01:56] GPU PCIe CUs CoreMHz SocMHz MemMHz TEdge TJct TMem FanPct FanRpm VDDC ETH Cfg
[2021-01-19 12:01:56] 0 04:00.0 60 1940 971 1200 53C 85C 69C 82.75% 3216 1025 mV C320
[2021-01-19 12:01:56]
[2021-01-19 12:01:56] Stats Uptime: 0 days, 00:27:30
[2021-01-19 12:01:56] ----------------------------------------- GPU Status -------------------------------------------
[2021-01-19 12:01:56] GPU 0 [53C, fan 82%] ethash: 120.0Mh/s, avg 119.4Mh/s, pool 121.0Mh/s a:131 r:0 hw:0
[2021-01-19 12:01:56] Total ethash: 120.0Mh/s, avg 119.4Mh/s, pool 121.0Mh/s a:131 r:0 hw:0
[2021-01-19 12:01:56] ----------------------------------------- Pool Status ------------------------------------------
[2021-01-19 12:01:56] daggerhashimoto.usa.nicehash.com ethash: 119.0Mh/s, avg 118.2Mh/s, pool 121.0Mh/s a:131 r:0
[2021-01-19 12:01:56] ------------------------------------------------------------------------------------------------
[2021-01-19 12:01:56] Mining ethash with 1 GPU workers
[2021-01-19 12:01:56] GPU PCIe CUs CoreMHz SocMHz MemMHz TEdge TJct TMem FanPct FanRpm VDDC ETH Cfg
[2021-01-19 12:01:56] 0 04:00.0 60 1940 971 1200 53C 85C 69C 82.75% 3216 1025 mV C320
[2021-01-19 12:01:56]
[2021-01-19 12:01:56] Stats Uptime: 0 days, 00:27:30
[2021-01-19 12:01:56] ----------------------------------------- GPU Status -------------------------------------------
[2021-01-19 12:01:56] GPU 0 [53C, fan 82%] ethash: 120.0Mh/s, avg 119.4Mh/s, pool 121.0Mh/s a:131 r:0 hw:0
[2021-01-19 12:01:56] Total ethash: 120.0Mh/s, avg 119.4Mh/s, pool 121.0Mh/s a:131 r:0 hw:0
[2021-01-19 12:01:56] ----------------------------------------- Pool Status ------------------------------------------
[2021-01-19 12:01:56] daggerhashimoto.usa.nicehash.com ethash: 119.0Mh/s, avg 118.2Mh/s, pool 121.0Mh/s a:131 r:0
[2021-01-19 12:01:56] ------------------------------------------------------------------------------------------------
That's at 285W, so 421MH/s/kW.
That's so good! such a shame these cards are impossible to find
Re: [ANN] TeamRedMiner 0.8.0 - Ethash/Kawpow/Nimiq/Etchash and More
"Claymore API now supported, meaning you can use EthMan to monitor TRM rigs"
not working. I use EthMan with phoenixminer works fine on local network. not with TRM.
not working. I use EthMan with phoenixminer works fine on local network. not with TRM.
anyone with a invite? I have been in crypto for years. Not with much luck though 
Really interested in this one
Really interested in this oneLess than 3hours left for next validation. If your wallet synchronised, try on Telegram group https://t.me/Idenacodes and ask for invite code.
you have to know that it is necessary to start your wallet much before validation start, after the restart, they also need to sync. don't wait for the last minute.
I got an invite but it only worked on web wallet not on windows wallet. I fast synced my wallet.
I have a choice of either getting a corsair hx1000 or silverstone sst-st1200 (thats the model not with -pt or anything)..
I am not sure if corsair is better option when silverstone has 1200w.
so I am a little confused.
I am not sure if corsair is better option when silverstone has 1200w.
so I am a little confused.
Re: [ANN] [AirDrop] DECNT - Decentralized token with no centralized management
P.S: I wrote this to Telegram chat, then also pasted to here. Feel free to join us at the TG chat if not already done: https://t.me/DECNT_Unofficial
this link wont open for me. I tried it many different times, and different browsers.