Search content
Sort by
Showing 8 of 8 results by songjuhee
Re: Gateless Gate Sharp 1.2.10: zawawa's open-source dual ETH/XMR/PASC/LBC/FTC miner
And again meet bug with jumping speed. After 1,3 hour speed on all GPU's start to jump fron 0 to 1000 h/s and then stabilize on normal speed.
And it's need to fix overclock system hangs on Pitcairn. So as binary kernel slow down on 4Gb Pitcairn.
P.S. Yes, CPU usage is growing with time. At start it's only 0-1-2%. It's good. But after 1 hour it's allready 0-4%. And jumps continues to grow.
And it's need to fix overclock system hangs on Pitcairn. So as binary kernel slow down on 4Gb Pitcairn.
P.S. Yes, CPU usage is growing with time. At start it's only 0-1-2%. It's good. But after 1 hour it's allready 0-4%. And jumps continues to grow.
Yup, i got that too.. from 900 h/s suddenly jump to 1000 h/s even 1,200 h/s for 1 second and drop to 600 h/s
Does anyone know the fix for the WATCHDOG: GPU 0 hangs in OpenCL call, exit?
using this version with a sapphire r9 380x
Also, my screen will turn black for like 1-2 secs and go back to normal and that's when my h/s goes to zero and has to start up again.
using this version with a sapphire r9 380x
Also, my screen will turn black for like 1-2 secs and go back to normal and that's when my h/s goes to zero and has to start up again.
so did i, before i run claymore from nicehash. you can overclock but leave the voltage.... and everything fine (for me)
Haven't been able to get Claymore stable 24hr+ with my RX580 8G rigs. Settings were 1200/2000/1100mV with power stage 5. Stilll reseting.
Since some of you are talking about SGminer...trying to config sgminer 5.5.5 in SMOS for my rigs default is:
--no-submit-stale --kernel cryptonight -o stratum+tcp://cryptonight.usa.nicehash.com:3355 -u [yourwallet].$rigName -p x --rawintensity 1000 -w 8 --text-only
I would like to change the rawintensity, worksize etc to be optimized for my miners. I have two different setups, either RX 570 4G or RX580 8G.
For the RX570 4G I'm trying to pass a --rawintensity 512 --worksize 4. For the RX580 8G, I'm trying to pass --rawintensity 1152 --worksize 8.
I've also seen people change the gpu-threads to 2, though I haven't played with this setting. Has anyone seen a change in performance by changing # GPU threads?
When I do this, I see no change in performance, even when I adjust values. It just shows:
[21:54:08] Startup GPU initialization... Using settings from pool cryptonight.usa.nicehash.com.
[21:54:08] Startup Pool No = 0
[21:54:08] Building binary cryptonightEllesmeregw8l8.bin
Initialising kernel cryptonight.cl with nfactor 10, n 1024.
Right now I'm only hashing at 480H/s on the 570 and 677H/s on the RX580. With Claymore I was getting 630H/s and 740H/s respectively.
Thanks.
Since some of you are talking about SGminer...trying to config sgminer 5.5.5 in SMOS for my rigs default is:
--no-submit-stale --kernel cryptonight -o stratum+tcp://cryptonight.usa.nicehash.com:3355 -u [yourwallet].$rigName -p x --rawintensity 1000 -w 8 --text-only
I would like to change the rawintensity, worksize etc to be optimized for my miners. I have two different setups, either RX 570 4G or RX580 8G.
For the RX570 4G I'm trying to pass a --rawintensity 512 --worksize 4. For the RX580 8G, I'm trying to pass --rawintensity 1152 --worksize 8.
I've also seen people change the gpu-threads to 2, though I haven't played with this setting. Has anyone seen a change in performance by changing # GPU threads?
When I do this, I see no change in performance, even when I adjust values. It just shows:
[21:54:08] Startup GPU initialization... Using settings from pool cryptonight.usa.nicehash.com.
[21:54:08] Startup Pool No = 0
[21:54:08] Building binary cryptonightEllesmeregw8l8.bin
Initialising kernel cryptonight.cl with nfactor 10, n 1024.
Right now I'm only hashing at 480H/s on the 570 and 677H/s on the RX580. With Claymore I was getting 630H/s and 740H/s respectively.
Thanks.
leave your voltage automatically... it works for me without reset
I had that behaviour when moved to claymore v10.2 but, to be honnest I had a superior speed with it. Like you, sometimes the miner restart and stay freezed at 0H/s as well. The only way of getting out of this state was rebooting the whole rig. And by rebooting, i mean shutting it off, wait 2-3s in power-off and then rebooting. Lowering the "-h" parameter bring more stability to the system. So, my current onfiguration is:
Cards: RX580-4G,RX580-4G,RX580-4G,RX570-8G,RX570-8G,RX580-4G,RX580-4G,RX580-4G,RX580-4G,RX480-4G
Claymore command line to XMR mining:
-xpool stratum+ssl://xmr-eu1.nanopool.org:14433 -xwal XMR_ADDRESS/$rigName/your@email.com -xpsw x -mport -3333 -h 850,850,850,1700,1700,850,850,850,850,850
As you can see, you can pass to the miner a comma separated values in that each one is to a specific card from my list above. For reference, the default "-h" value for the 4Gigs cards is "900" and "1800" for the 8Gigs.
My current frequencies for each card are:
CORE: 1200,1200,1200,1200,1200,1200,1200,1200,1200,1200
MEM: 2000,2000,2000,1900,1900,2000,2000,2000,2000,2000
XMR - Total Speed: 6948 H/s, Total Shares: 1340, Rejected: 0, Time: 06:43 |
XMR: GPU0 715 H/s, GPU1 715 H/s, GPU2 715 H/s, GPU3 686 H/s, GPU4 649 H/s, GPU5 712 H/s, GPU6 715 H/s, GPU7 713 H/s, GPU8 713 H/|
s, GPU9 615 H/s
Hope this help
Can anyone confirm what's the "-h" is doing behind the scenes? and why lowering it a bit bring more stability?
Just wanted to update. I tried lowering the -h value on my rigs. I have three different setups:
6x RX570 4G - these are at 1200/1750/1000mV -h 850 -> These have been stable for last 24h, no resets
11x RX570 4G - these are at 1200/1750/1000mV -h 850 -> These have reset 2-4 times over last 24h - Going to test -h 800 to see if I can get better stability
11x RX580 8G - these are at 1200/2000/1000mV -h 1700 -> These have reset 1-2 times over last 24h - Going to test -h 1600 to see if I can get better stability
For the RX570 4G cards, I'm hashing at 644, for the RX580 8G cards, I'm hashing at 733. I'm not sure why the RX570 4G have been stable but the RX580 8G have not. Hopefully this next test shows a better result.
I'm not sure if there's a way to increase the virtual memory on SMOS. My rigs use 8G of physical RAM (tho I just realized that both my 6x and 11x rigs both are using 8G of RAM so maybe I should increase my 11x rigs to 16G of RAM). I'm not using SSDs either, SMOS is being booted from a 16G 3.0 USB drive. I'm not sure if 16G of physical RAM would increase stability as I used to mine Ethereum with these rigs and they have been stable with far more aggressive settings. The RX570 4G were at 1150/1750/950mV and the RX580 8G were at 1150/2100/950mV and the systems were stable for 100+ hours with no resets.
Cheers,
You can use overclock settings but let the NH run claymore, or run claymore alone without undervolt (-mvddc or -cvddc). It works for me...
Set the virtualmemory to 64000 - I had the same problem with my rig of 580s at it was solved like this.
Hello,
I am having an issue with my claymore cryptonote miner constantly restarting every hour or two, usually with watchdog timeouts. I am running it on SMOS. I've had no issue running the claymore miner for Eth, system is usually stable for days on end. For mining ETH, I usually connect to a pool but for Cryptonight, I am trying out NiceHash.
My rigs use RX580 8G. 1150/2100/1000mV/PowerStage 4 - initially I had the voltage at 950mV and powerstage 3 as these settings have been solid for mining ETH.
My claymore initializing settings are: -wd 1 -r 0 -xpool stratum+ssl://cryptonight.usa.nicehash.com:33355 -xwal yourWallet.yourRigName -xpsw x -allpools 1
Does anyone else run into a similar issue with stability?
Any help would be appreciated.
Thanks
I am having an issue with my claymore cryptonote miner constantly restarting every hour or two, usually with watchdog timeouts. I am running it on SMOS. I've had no issue running the claymore miner for Eth, system is usually stable for days on end. For mining ETH, I usually connect to a pool but for Cryptonight, I am trying out NiceHash.
My rigs use RX580 8G. 1150/2100/1000mV/PowerStage 4 - initially I had the voltage at 950mV and powerstage 3 as these settings have been solid for mining ETH.
My claymore initializing settings are: -wd 1 -r 0 -xpool stratum+ssl://cryptonight.usa.nicehash.com:33355 -xwal yourWallet.yourRigName -xpsw x -allpools 1
Does anyone else run into a similar issue with stability?
Any help would be appreciated.
Thanks
What is your gpu's settings?
Pardon my ignorance what is a pagefile size?? and how can I try 40GB
thx
Pagefile = virtual memory
right click my computer/this pc (on windows 10) - properties - advanced system settings - click tab advance - in performance click settings and you can set the pagefile manually
put 3000 to 40000 or directly 40000 to 40000
40GB is an overkill. I've got it working just fine (on dual ETH) with 30GB (28 works too, but 24 doesn't:) with 12GPUs on 8GB RAM system
so do i, my 580 x5 need almost 40GB pagefile (38,xxxxx)
i think i am not alone getting "WATCHDOG: GPU x hangs in OpenCL call, exit" message. Restart in every few hours or sometimes every minutes.. but mostly happened in gpu 0/1 (with long type pci-ex slot/pci-ex x16), maybe i'll try to only use x1 type pci-ex..
Pardon my ignorance what is a pagefile size?? and how can I try 40GB
thx
Pagefile = virtual memory
right click my computer/this pc (on windows 10) - properties - advanced system settings - click tab advance - in performance click settings and you can set the pagefile manually
put 3000 to 40000 or directly 40000 to 40000