So how do stop all the gpu's but one from mining?

From this software?  no clue.  on windows it's easy

Hello there,

I have one question
since I moved to claymore 10.6 I have peakes in curent hash rate
http://i1062.photobucket.com/albums/t490/davor_vfr/SMOS_zpspkyzmsrr.jpg

Before that I had much more smoother curve. Is there something I can do with that?

Rig works stable at 29,6 MH/s. I have 5 pcs of flashed RX580 (8Gb) in rig.

I use this syntax
-wd 1 -r 1 -epool us1.ethermine.org:4444 -ewal XXXXXXXXXXXXXXXXXXXXX.xxxxxx -epsw x -allpools 1 -asm 1 -mport 127.0.0.1:3333

and this is my OC setings
core 1155,1155,1155,1155,1153
memory 2215,2215,2215,2215,2210
core undervolting 930,930,930,930,950
powerstage 3
target temp 60 °c
minimum fan speed 30

Can I do something with  "-dcri" but I don't know where to start playing with it.

C/P
FINE-TUNING
ETH-only mode when ASM algorithm is used (enabled by default): change "-dcri" option value with "+/-" keys in runtime to find best speeds. If you get best speed at "-dcri 1" (i.e. you cannot find speed peak), use "-asm 2" option to enable alternative ASM kernel (available for Tonga and Polaris cards only).
NOTE 1: if GPU throttles (overheated) or if you overclocked GPU, best "-dcri" value will be different.
NOTE 2: speed peak can be rather short, so change "-dcri" value slowly, one-by-one.
NOTE 3: best -dcri values for ETH-only mode and dual mode can be different.

Thanks a lot for reply guys!

Hmm seems stange. I dont recall such case.
Can you check if this rig was just restarted and you saw new fresh values while pool was showing old values ?
Please check if that is happening again.
It could be so many reasons...
Can You check if console was refreshing and you seen new and new values ? Meaby console wasnt updating and you saw only some old results while in real the rig ws somehow hanged ?
It could be also pool problem ? It could be even hacker.
I have too little data to tell. If this happens again please try loggin via ssh to account miner and passwrod also miner and execute command: screen -x miner
If you will see full speed while pool shows something different then it is a miner problem or pool problem.
Also take a look at pool charts (how long it lasted etc)

It depends what OS you have (meaning what gpus ? R9 ? RX or NVidia ?)
In Nvidia you need to enter only OFFSET and not clocks itself so you dont write 4700 but values -100 to 1300 for example for memory.

Hi,

I have the same problem with 5 CG SmOS does not load and the rig reboot in loop  

MSI Z270-A Pro / Intel G4400 / 4 1070 GTX + 1 1060 GTX  

Enable 4G
PCI Gen 2 or Auto no change for 5 GPU

SMOS works very well with 4 CG.

Sorry for my english im french

Thank you for your help

Hi Guys,

I'm writing this post hoping that there is someone who could help me with some answers. I'm new in mining, as you all were in the beginning so I'm still trying to find my place in the huge amount of info.

Well, I've just set up my RIG (6 x XFX RX 470 8gb) and I'm currently trying to understand if the frequencies for memory and gpu shown in the SM console are the stock frequencies of the video card or the values I see there are overclocked by SMOS? It's currently show me 1180/1950/card.

Do you have any info on this matter?

I've had this problem for 3 days. different cards, different risers. can't find solution yet. What mobo do you have? Is it a 270-A?

Hi guys!

Im new is SMOS, currenctly im using windows, but i want to change to SMOS. I tried it today and works fine, but the fan control not works. I add in the oc settings a minimum fan speed % and target temperature but do nothing and the OS let the card overheat...


I tryed with:
SMOS latest release Operation System ( for nvidia one)
GTX 1050 Ti 4gb Gainward (direct plugged in not trought usbriser)
Claymore eth+pasc / ewbf zec miner too

It cannot handle fan speed, but i dont know why. Is simpleminingos can handle nvidia's fan?


Thanks for help

http://www.kepfeltoltes.eu/images/hdd1/2018/01/23/509smos.jpg


http://www.kepfeltoltes.eu/images/hdd1/2018/01/23/509smos_tn.jpg

http://www.kepfeltoltes.eu/view.php?filename=509smos.jpg

http://www.kepfeltoltes.eu/view.php?filename=509smos.jpg


errors in image:


ERROR: error quering enabled displays on GPU 0 (missing Extension)

ERROR: error quering enabled displays on GPU 0 (missing Extension)

ERROR: Error resolving target specification 'gpu:0' (No targets match terget specification), specified in query '[gpu:0]/GPUGraphicsClockOffset[2]'.

Great. Came back from work, and this thing had crashed again.
Hours wasted again.
Restarted manually and the GPU clock frequencies were sky high!!! WTF

Now I set overclock to 0, and the clocks are still over what is considered stable. Have to downclock to achieve previous overclock settings now.. There is a serious bug here.

I can confirm that I have been partially successful in making the Asus Z270-P work with 6 Palit 1060 cards - with one big caveat - two of the cards, GPU0 and GPU2, are only hashing at half capacity.

The jury is still out on whether I'm having hardware or software issue - or both.

I think I'm having several issues at once, which kind of make it hard to track down. I changed two of the cards from 1070's to 1060's in the hope that managing just one type of cards would simplify things but they didn't. I'm also having issues with SMOS web interface changes not pushing through to the rig - it remains stuck on the same algo/currency/pool even though I try to change the rig group to something else, and the OC and Watt settings have no effect. But the strange thing is that the rig reboots after changing the settings, just as if it was restarting because of the changes - but everything remains the same when inspecting the console. This seems like a SMOS issue, but I can't be sure.

The two GPU' s running at half speed could be a nicehash related issue, as some googling around have revealed that people have had issues with this when mining to nicehash. Easiest thing to do would be to change to another pool to see if that made a difference, but then SMOS is refusing to push pool setting changes through, leaving me stuvk with nicehash ATM. Bit of a catch 22.

I was thinking I'd try Pimp OS as soon as I have a little spare time just to see how that affects things, but ATM I don't have much spare time...

I currrently have 8 GPU's on ASUS z270-a, ASUS z270-p and ASUS B250H, They all working flawlesly. You can take your pick.

). I'm swiching off all card exept one and checking wich in hot=). I ll share with you

Damn, that is a complex rig I would suggest, maybe adjust oc settings slowly until you find the perfect setup.

One tip is: From what I saw, first 3 PCI-e are 16x ones, taken from the CPU down. Rest, I don't know.

I have a z270-a too. Din't bother to check the pcie order....Why would you need it? You can see and configure everything you need based on the dashboard information.

That is exactly why - because you changed the motherboard.