I just got mine as well, I ssh to it and edited the config file to freq 550 and now its above 12 ksols up to 15 sometimes

I just fixed this today on my rig.
The last 4 days all of a sudden it started dropping GPU' s from mining.
Tried everything and then this morning put a new PSU in,
It worked straight away and no more opencl errors.
The old psu was 4 years old so I guess it was getting tired.
So the fix is get a new PSU

I bought 6 VER009s risers.
I plugged everything in as normal, tested the board with the GPU in the socket for a startoff, was fine.
Hooked up the risers and GPU's and started computer. CPU fan gave one spin then nothing.
Thought I had a bad motherboard so took it back and got a replacement.
Installed it and hooked everything up and the same thing happened.
So took the whole rig into the computer shop so they could try it..
3 mining extra motherboards, brand new CPU, Brand new PSU later.
The risers were the last thing it could be.
Bought some VER 006c risers that I normally used from normal supplier.
Bought another motherboard as the other one was away for replacement taking 3 weeks to come back..
Very carefully followed normal process, booted up the first time with the GPU in the motherboard slot, checked bois, everything looked good.
Plugged one GPU into a riser and into the board. Started computer and it bloody worked !!
And its still mining now with 6 GPU in it without a problem.

It was the VER 009s riser all the time blowing Motherboards. I've never seen that before.
Learnt my lesson, I'll only buy VER 006c risers now which is what I normally use.

Yeah it was bad risers. VER 009s they were.
I got some of the ones I normally use today - VER 006c.
Another new mobo put them in as powered risers and works straight away. Its Mining now..
It was definatly the risers and they were installed as all the others I've done.
CPU and PSU were fine.

When setting up the GA-H110 Installed the CPU and fan, plugged the GPU into the board for a startoff, got into bios fine and set the Gpu to pcie slot 1, turned on mining mode rebooted and it went into windows fine. I thought everything is ok..
Then turned off and put the gigabyte 1060 Gpu that was in the board onto a VER 009S powered riser.
Everything is on a single EVGA 1000 psu.
Rebooted and the CPU fan spun once then stopped and no post or boot.
Took the GPU out of the riser and plugged it directly into the M/b again.
Tried to boot again but its dead, no CPU fan starting, nothing - dead..

Any ideas on if I can reset the m/b, Have taken the battery out and shorted the cmos pins but still nothing.
The only thing that was different was it went onto a riser then M/B dead after that.
Gone through 3 Motherboards no and have replaced everything new apart from the Risers.
Any ideas ?

When setting up the GA-H110 Installed the CPU and fan, plugged the GPU into the board for a startoff, got into bios fine and set the Gpu to pcie slot 1, turned on mining mode rebooted and it went into windows fine. I thought everything is ok..
Then turned off and put the gigabyte 1060 Gpu that was in the board onto a VER 009S powered riser.
Everything is on a single EVGA 1000 psu.
Rebooted and the CPU fan spun once then stopped and no post or boot.
Took the GPU out of the riser and plugged it directly into the M/b again.
Tried to boot again but its dead, no CPU fan starting, nothing - dead..

Any ideas on if I can reset the m/b, Have taken the battery out and shorted the cmos pins but still nothing.
The only thing that was different was it went onto a riser then M/B dead after that.

So what happens to our ETN  mobile wallets ?
do they convert automatically to ETNX or are they going to bring out a new ETNX mobile wallet to change over to ?

Is there any other place we can use for our Electroneum wallets ?
the wallet at my.electroneum.com takes ages to update. sometimes 3 days after the funds are sent...
and the mobile wallet is the same ?
Most of the time it says updating then comes back with try again later.
I also have funds in cryptopia from trading that I cant get out ??
What is going on with all of this.. If this coin grows much more it will stop and come to a standstill.
We need more wallets at other places away from my.electroneum.com

`

Ok, windows rebooted to update, it came up after that.

I keep disabling Windows Update and stopping the service but the bloody thing keeps turning itself on again

It definatley wasn't a new install, I was just rebooting.
I'll try a reboot with 2.0.1.11 and see what happens.

I upgraded to 2.0.1.11 yesterday.

Since then I have noticed that excavator is mining ok, then all of a sudden I see red lines and it restarts.
Its mining equihash with 8 x nvidia GTX 1060 3gb
It hasn't been doing this with earlier versions, it would go for days.
Once I saw this tonight I went to the log files to see what the errors are, the lines below keep coming up and it looks like its just before it restarts.
The errors below are in the log files at where it looks like it restarts.

{"name":"NHM","hostname":"Miner04","pid":2864,"level":30,"msg":"[JSONTypedParse] Unable to parse response as JSON SyntaxError: Unexpected token P in JSON at position 40","time":"2018-02-27T04:41:27.920Z","v":0}
{"name":"NHM","hostname":"Miner04","pid":2864,"level":30,"msg":"[API] method: undefined error: TypeError: Cannot read property 'method' of null","time":"2018-02-27T04:41:27.920Z","v":0}

Yes I have on all of them. Thats why I was surprised as I have rebooted np before..
I also rebooted the rig remotely with teamviewer, would that affect it ?
 I've upgraded to 2.0.1.11 now.

I was just doing a restart on one of my rigs with nicehash 2.0.1.10 on it.

When it restarted it came up saying - we don't allow bots here type in the number below ?

I had the miner set to start when windows started by putting a link to it in the startup folder.
I had it setup like this so if the computer restarts or there is a power outage and it comes on again it would start mining by iself.
Is there any way around this if I am out or at work otherwise I have to be there to type in the number

Cool, Thanks for the help,
I'll try all that out

What is the setting for gpu temp in the excavator default_config_file ?
In msi Afterburner I have it set to 92deg.
I alredy have these in for OC setings but cant find the temp parram anywhere ?

{"id":1,"method":"device.set.power_limit","params":["0","70"]},
{"id":1,"method":"device.set.core_delta","params":["0","100"]},
{"id":1,"method":"device.set.memory_delta","params":["0","800"]},

I have got excavator running externally with the daggerhashimoto algo with my 8 x GTX 1060 3gb cards np.
It did the dag file ok at the start of mining..

I was mining to:
{"id":1,"method":"algorithm.add","params":["daggerhashimoto","daggerhashimoto.usa.nicehash.com:3353",
What is the address and port for dual mining with decred or pascal to try those..

I just have to put my oc settings into the default_config file now as it started up with no oc settings and everything heated up pretty fast
It didn't take any notice of my MSI afterburner settings and went default. Below was my config file..

[
   {"time":1,"commands":[
      {"id":1,"method":"algorithm.add","params":["daggerhashimoto","daggerhashimoto.usa.nicehash.com:3353","BTC ADDRESS REMOVED.worker4"]}
   ]},
   {"time":2,"commands":[
      {"id":1,"method":"worker.add","params":["0","0"]},
      {"id":1,"method":"worker.add","params":["0","1"]},
      {"id":1,"method":"worker.add","params":["0","2"]},
      {"id":1,"method":"worker.add","params":["0","3"]},
      {"id":1,"method":"worker.add","params":["0","4"]},
      {"id":1,"method":"worker.add","params":["0","5"]},
      {"id":1,"method":"worker.add","params":["0","6"]},
      {"id":1,"method":"worker.add","params":["0","7"]}
   ]},
   {"time":10,"commands":[
      {"id":1,"method":"worker.reset","params":["0"]},
      {"id":1,"method":"worker.reset","params":["1"]},
      {"id":1,"method":"worker.reset","params":["2"]},
      {"id":1,"method":"worker.reset","params":["3"]},
      {"id":1,"method":"worker.reset","params":["4"]},
      {"id":1,"method":"worker.reset","params":["5"]},
      {"id":1,"method":"worker.reset","params":["6"]},
      {"id":1,"method":"worker.reset","params":["7"]}
   ]},
   {"event":"on_quit","commands":[
      {"id":1,"method":"device.set.tdp","params":         ["0","100"]},
      {"id":1,"method":"device.set.core_delta","params":   ["0","0"]},
      {"id":1,"method":"device.set.memory_delta","params":["0","0"]},
      {"id":1,"method":"device.set.tdp","params":         ["1","100"]},
      {"id":1,"method":"device.set.core_delta","params":   ["1","0"]},
      {"id":1,"method":"device.set.memory_delta","params":["1","0"]},
      {"id":1,"method":"device.set.tdp","params":         ["2","100"]},
      {"id":1,"method":"device.set.core_delta","params":   ["2","0"]},
      {"id":1,"method":"device.set.memory_delta","params":["2","0"]},
      {"id":1,"method":"device.set.tdp","params":         ["3","100"]},
      {"id":1,"method":"device.set.core_delta","params":   ["3","0"]},
      {"id":1,"method":"device.set.memory_delta","params":["3","0"]},
      {"id":1,"method":"device.set.tdp","params":         ["4","100"]},
      {"id":1,"method":"device.set.core_delta","params":   ["4","0"]},
      {"id":1,"method":"device.set.memory_delta","params":["4","0"]},
      {"id":1,"method":"device.set.tdp","params":         ["5","100"]},
      {"id":1,"method":"device.set.core_delta","params":   ["5","0"]},
      {"id":1,"method":"device.set.memory_delta","params":["5","0"]},
      {"id":1,"method":"device.set.tdp","params":         ["6","100"]},
      {"id":1,"method":"device.set.core_delta","params":   ["6","0"]},
      {"id":1,"method":"device.set.memory_delta","params":["6","0"]},
      {"id":1,"method":"device.set.tdp","params":         ["7","100"]},
      {"id":1,"method":"device.set.core_delta","params":   ["7","0"]},
      {"id":1,"method":"device.set.memory_delta","params":["7","0"]}   
   ]}
]

Yes, thats what I meant, external mining to nicehash without NMH

Ok,  then I could use it for external mining ?

I have been trying to figure out why I had no daggerhashimoto on my GTX 1060 3gb rig with NHM. now I know.
But this site below says the dag file is only 2.31gb yet, nowhere near the 3 gb limit ?

https://investoon.com/tools/dag_size

whats this all about:

http://hashocean.cloud/#news
Our Data Centers has been Pause until 29/08/2016

Today we are pause service mining because we are working to upgrade our services and moving a data center from USA to China. We will launch again service mining on 29/08/2016.

Team HashOcean !