The new version is finally ready. You can download PhoenixMiner 5.8a from here:

https://phoenixminer.info/downloads/PhoenixMiner_5.8a_Windows.zip
https://phoenixminer.info/downloads/PhoenixMiner_5.8a_Linux.tar.gz


Changes in version 5.8a :

• Added lock core clock
• Fixed an issue causing crashing with some RTX 3060/3080/3090 cards
• Implemented new "turbo" kernels (-clkernel 3) for AMD Polaris cards that can work with the current DAG sizes over 4 GB. Note that -clkernel 3 uses double the VRAM and will
  provide slightly faster hashrate with slightly higher power consumption. You can use the -rvram command-line parameter to specify how much VRAM to be left unused
• Increased the maximum supported DAG epoch to 600 (i.e. until about Sep 2023)
• Implemented full hardware control for AMD RX6900/6800/6700 cards under Linux. Note that with these cards under Linux you need to specify relative core voltage: e.g. -
  cclock -50 will set the core voltage to be 50 mV under the default value
• Added ROCr kernels for Vega, Radeon VII and Navi cards. With these kernels you will be able to run these cards with Linux drivers 20.45 and later but the performance will
  be lower than with the older PAL drivers and kernels. We recommend using AMD Linux driver 20.30 for all cards except RX6900/6800/6700
• Fixed an issue causing crashing with some RX6900/6800/6700 cards under Linux (there is no need to run these cards with -clkernel 0 anymore)
• Added support for AMD Windows drivers up to 21.8.1. Note that Radeon VII cards will not work with drivers 21.6.1 or higher - you need to use older drivers for proper
  operation of these cards
• Added support for AMD Linux drivers up to 21.20 (use older drivers for Vega or Radeon VII cards as they will not work with 21.20). Note that the latest 21.30 drivers are
  not supported (and the initial testing shows that even the older Polars cards are not working properly with them, so avoid 21.30 for now)
• Numerous other fixes and small improvements

Please let us know if you have any problems or questions related to PhoenixMiner 5.8a

@Thomasio:
As I wrote earlier, I used the coinpot from time to time, NEVER used VPN or multiple accounts, just one connected to their moon faucets.
My last payout from any moon or coinpot faucet was somwhere in 2018, so you see I am not a heavy user for dash and ltc I got slightly more than minimum balance to pay out.
From coinpot I can see: 1. Withdrawal request; 2. Withdrawal confirmation - together with email, I should wait up until 48 hours, and then; 3. All withdrawals marked as cancelled.
So marking me as a screaming cheater is questionable, and I am pretty sure there are many more people in the same situation.
Nevertheless, if you got your coins OK, you're the lucky one.

How do you explain, that every day more and more people are ending with suspended accounts and payments won't be processed, as they are CANCELLED and will NOT be paid off, without refunding the ballance?
As I wrote, I am unaware of braking ANY terms of coinpot.co, as most if not all the people with the same scenario do. Seems they deciding on "coincident formula" who will be paid and who not.
The fact is, they select users for being able to withdrawal, the others are out of luck. Big shame on coinpot.

For me coinpot.co ended as a Scam, as they suspended my account for violating terms, which I never have been doing. All my withdrawals are cancelled without refunding ballance. Sayonara scammers

I've been using coinpot for quite time, I registered in 2017 and used it from time to time. When I saw the message, they will close, I tried to withdraw my coins. But to my surprise, all of my withdrawals were cancelled, as it states, I had viloated terms. I am no aware of any violation at all, so for me, after 3,5 years it is clear scam. Tried to get in touch with support, but no go, returned message, mailbox is full.
Shame it ended up like this, sayonara coinpot.