Hi.
Only a question, i spent last days to update my farm with good result.

With old version i start the miner, and then hwinfo for monitoring hw error and works fine.

Close the miner change clock restart all is ok.

With the last version if try to change memory, core clock, voltage or other settings i need to restart my rig
to be apply.

If try to run claymore at the same time with hwinfo, hashrate drop or crash.

Oc and voltage settings apllied or with command line or with overdriventool with the same result.

Other users with this issue?

I tested it by installing amd driver 19.4.3 and after that Claymore driver ("Ethdcrminer64 -driver install") as an admin on cmd prompt then added "-strap 1" to end of bat file. I did over- and underclocking in AB. (RX4?0) . Worked perfectly.

With the new version of Claymore, what WIN10 version (updates) are you using and what are the best drivers for RX 4xx & 5xx cards?

I'm using 11.8 on a 13 AMD RX580 card rig, I have tried mining ETH on Suprnova, Ubiq on Suprnova and ubiwpool...and I cannot get the proper payout.
According to Whattomine I should be getting .03 ETH every 24 hours, I mined it for 3 days and got .03.  And on Ubiq I should be getting 10-12 every 24 hours but I've mined that for 3 days now as well and haven't even gotten 10...
Mh/s is good at 393, anyone else experiencing this?

Guys,

I have one miner that i cannot figure out. Mind you i have 30+ but yes i cannot figure this one out, and its driving me nuts.

The issue is that after the Windows 10 April update the miner will start but pauses....it does not close. I have tried everything i know and nothing. So i went ahead and installed a clean version of 1709 build with all of its updates.

I have reinstalled 11.7(which was working with no issues prior) and still nothing. I have tried adrenaline 18.2 and even downgraded to the blockchain drivers and still nothing. The motherboard is up to date, windows sees all the cards...no issues there. I have patched the drivers...etc...etc...

These are AMD RX560's that have been modded...and again these were working fine before the darn update got me.....I have also excluded the claymore folder in defender, set a pause for 30 seconds etc...

Im hoping someone out there has run into this prior....i am now having this same issue with another rig running rx470's

Any help would be appreciated

Thanks

Latest claymore won't even launch for me with new windows update ughhhhh.. Stupid PC updated only 11.0 working for me and lower hash rates on my vega 64.. Same settings with overdriventool I would get 46 mhs now just 37. Using latest amd drivers. roll back on driver does not change this. 

same for me with MSI RX570 4GB, max.51 intensity, 52 is error ...

You must point that 570 is Sapphire Nitro+. It's good quality cards. On not so good cards like MSI Gaming X (not plus) 2100MHz isn't stable on doctor's strap. Max 2075-2085MHz and it's only 950-960 h/s gives. On 2100MHz comp hangs after few minutes same as 2150, wich hang comp nearly after launch of miner.
Must say - anyway doctor's strap "999..." is a little better than "777..." strap. It gives max 930 h/s on 2100-2125MHz.

P.S. I think that doctor's strap can be improved for stability to reach more memory speed on not good quality cards, but it'll lower hashrate... It's need to work on it and test.

Doctor, can you modify your strap a little for improve stability? At least say what it's need to change and I can test it on MSI.

anybody is mining with an rx 480 8gb ?
Mind to share core and memory setting ?
I just received one and they are for use far away from RX 580 8gb I was used to, as I get only 600 h/s with Monero

Hw error means gpu result did not pass cpu validation. So if you want try lowering intensity, or mem clock for ex.

I am having this same issue. The only thing in the log file shows "watchdog: GPU crash detected, miner will try to restart" and then it hangs with 99% CPU usage. Version 1.3.1 didn't do this.

Can you add in the logging which GPU ID crashed to help narrow down hardware issues. Right now I don't see how logging is of any help.

Miner 1.3.2 cant't shutdown if crash detected. System also can't reboot in this case. Only reset can help.
CPU usage in this case is 99%

Also in version 1.3.2 i can't see which card is crashed.