I also see 0 active connections and the wallet is not synching but did sync on another pc I have set it up on, is there a list of peers that can be added to find connections?

so turns out the graphics cards were interfering with the wifi signal and wrapping foil around the antenna fixed the issue!

I'm going to try via ethernet and see if this works , already tried disabling IPv6 and didn't make a difference, admittedly my internet is terrible but most of the time good enough to stream tv/movies.

How do you disabled ssl on the miner?

Hi,

I have a usb wi-fi dongle plugged into my asus prime A with 5 x MSI Gaming X running on one rig and another wifi dongle , asus prime-A with 3 x MSI gaming x on another

The issue I’m having is that as soon as I run the EWBF or any other miner the dongle drops out, I am unable to ping 8.8.8.8 ( it drops out the exact second the miner tries to connect to a pool)

Strange thing it was working fine yesterday but my GPU was causing issues and kept stopping or losing connection to the pool

I have 2 mining rigs both doing the same thing but the problem occurred within hours of each other (one was working fine whilst the other had this issue)

I can mine from my laptop fine without the network dropping out so I don't believe it is a network issue.

My rigs are running win10 home and win10 pro

Tcp/ip settings look fine, hosts file looks correct

Any ideas?

I get an error when compiling in ubuntu 17.04

g++: internal compiler error: Killed (program cc1plus)
Please submit a full bug report,
with preprocessed source if appropriate.
See for instructions.
Makefile:5226: recipe for target 'zcashd-bitcoind.o' failed
make[2]: *** [zcashd-bitcoind.o] Error 4
make[2]: Leaving directory '/home/tom/VoteCoin/src'
Makefile:5279: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '/home/tom/VoteCoin/src'
Makefile:623: recipe for target 'all-recursive' failed
make: *** [all-recursive] Error 1

If you can provide me with some info as to how to solo mine this coin i'll be happy to start mining it and a windows wallet would be nice also

Is there any info on how to go about setting up a secure node or is it still in testing phase?

Where did you get the cables from? I did have a quick look but couldn't find anything

How are you running 6x 1080Ti from 1 PSU?

I am using 2 x EVGA P2 1200W to run 6 cards, there's only 6 x VGA/PCI-e cables per PSU so how can 1 PSU power this?

Hey, so I'm mining SIGT on supernova with 6 x 1080Ti's and often I get stratum connection failed, my 2 x 1080ti rig has none of these problems so don't think it's a connection issue.

my rig is 4gb ram, 3930 cpu, asus prime-A , USB powered risers, GPU's 80% TDP, + 60 core, memory - 502 , 70c

sometimes the chrome remote desktop connection takes ages to connect or doesn't connect at all , could be a faulty riser/card?

Thanks! my hash rate has increased by around 25%

I find that alexis78 v1.0 miner gives a faster hash rate for LBRY than ccminer 2.1/2.2

Out of interest what hash rate's do you get with 5/6 1080ti's for LBRY?

I'm mining LBRY with 2 x 1080ti's and getting 990-1000mh/s using ccminer alexis v1, does anyone know of a newer version of this miner or a faster miner?

where can I find the alexis78 mod?
the sp version is here https://bitcointalk.org/index.php?topic=826901.0

Does anyone use the lbry sp-mod? I have created a .bat file but when I run it, it tries to connect to zpool.ca

ccminer.exe -a lbry -o stratum+tcp://lbry.suprnova.cc:6256 -u xxxx.xx -p --cpu-priority=3
pause

Thanks TigTex and cTnko now has the correct has rate 

Hey,

so I've recently added a second GPU but my hash rate has remained the same, using ewbf and ccminer my hashrate has doubled as expected

anything I need to change in the config?

config:

[
   {"time":0,"commands":[
      {"id":1,"method":"algorithm.add","params":["lbry","lbry.suprnova.cc:6256","xxxx"]}
   ]},
   {"time":3,"commands":[
      {"id":1,"method":"worker.add","params":["0","0"]},
      {"id":1,"method":"worker.add","params":["0","0"]}
   ]},
   {"time":10,"loop":10,"commands":[
      {"id":1,"method":"worker.print.speed","params":["0"]},
      {"id":1,"method":"worker.print.speed","params":["1"]},
      {"id":1,"method":"algorithm.print.speeds","params":["0"]}
   ]}
]


I'm using v1.2.10a

I was getting around 7/8 DNR/day at 70mh/s but this has dropped to 4/5.

I mine on hashbag.cc using a 1080ti , core + 180 mem -500 80% TDP

Does anyone know the best settings to use?

Is it worth manually setting the difficulty in the ccminer config?

Try chrome remote desktop works best for me, or TeamViewer is not bad also

Has anyone managed to mine this yet using nvidia?

Which miner are you using? I tried using ccminer and one of the pools but didn't receive anything