Ninjastic
Search content
Sort by
Showing 10 of 10 results by thesunday
Post
Topic
Board Mining (Altcoins)
Re: Gigabyte-GA-H110-D3A Mining board SUCKS! Can't get 6gpu up and running
by
thesunday
on 13/02/2019, 07:11:48 UTC
Quote from: mousehouse on March 24, 2018, 03:35:44 PM
This board is driving me nuts! I had big problems getting just 2x ZOTAC 1080GTX to run,but managed in the end by putting them in specific PCI slots. Now I have a extra 4 cards, but I never get more than 4 recognized (most of the time I get just 3).

Tried all the tips, running latest F25 BIOS. I need to enable CSM or my SSD will not boot on the SATA port.

Will sell the full rig out of frustration soon, but before I do, any final clues?

Help rewarded....


Did you solve your issues? I am having the same thing. 4 x RX580 are working fine. When I put the fifth after some time I got BSOD with video_tdr_failure and then the fifth disapears. I am trying to solve this more then a week now.

I tried pcie 1gen, 2gen, 4G enabled, other os, igpu primary enabled, vt disabled, audio disabled, you name it ...

PSU is Corsair HX1000i, 6 x risers x1 with 6-pin to SATA, 8GB RAM, 18000-50000 GB virtual RAM, claymore's latest 12.0, latest adrenalin drivers, latest Win10 updates. GPU's RX580 with Samsung memory and one micron with gpu undervolt with cca 80W chip power output and memory overclocked, no memory errors in hwinfo, bios is the latest v25 ...

One more thing, I connected wires to power pins to turn the machine on. AC power is on enabled. However, when I turn it off on the PSU switch and turn the switch on it doesn't start automaticaly. I have to short connect the wires from power pins. What am I doing wrong to be able to turn it on without connecting power wires?
Post
Topic
Board Mining (Altcoins)
Re: RX 560 hashrates
by
thesunday
on 06/02/2018, 20:01:50 UTC
Quote from: srle521 on February 03, 2018, 06:08:42 PM

XMR: 482 H/s, temp: 48C, power 52W

GPU 1050/900, MEM 2150/850

ETH: 14.862 Mh/s, temp: 55C, power 67W

I had to lower MEM to 2125/850 for ETH, there where some memory errors.

PS.
Memory is  MT51J256M3 (MICRON)

So, all in all, for 35% price I got 53% of the RX 570 speed (mine RX 570s are at average doing 890 - 900 H/s XMR) at half of the power.

I have 2GB XFX, in my country 115 eur,  mining expose: 14.5 MH/s, gpu 1150/950, mem elpida 1950/850. Solution to mine ethash algo with a cheap AMD card. You need to set -allcoins exp in claymore to use devfee DAG as expose
Post
Topic
Board Mining (Altcoins)
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v10.6 (Windows/Linux)
by
thesunday
on 06/02/2018, 19:13:27 UTC
I'm sorry if this was asked already. I mine expose with 2GB gpu and this miner quits all the time because there is no free VRAM for devfee DAG file. Can you help me? I set allcoins and allpools to 1.

*edit: I see now in readme.txt, for expose I should use +-allcoins exp'.
Post
Topic
Board Mining (Altcoins)
Re: RX 560 hashrates
by
thesunday
on 01/02/2018, 09:00:09 UTC
Can I damage my gpu with memory errors? I get cca 40 of them in an hour. No rejected shares. It's Elpida memory.
Post
Topic
Board Pools (Altcoins)
Re: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.
by
thesunday
on 30/01/2018, 23:06:58 UTC
Quote from: sawnoff on January 30, 2018, 03:59:44 PM


I sent a few over to Cryptopia from MPH, no problem. [  Cryptopia Address.payment I.D. ] just in case you didn't know Wink

What is paymentID and where can I find it?

One more question, could someone help me to setup xmr-stak? For user name I enter my MPH username but I get socket disconected error.
Post
Topic
Board Pools (Altcoins)
Re: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.
by
thesunday
on 30/01/2018, 06:14:11 UTC
The MPH page says equihash has 0.18, cryptonight 0.09 norm. profit and whattomine with my hash rates puts cryptonight coins before equihash coins. WTM shows 10% more 24h profit for equihash coin ETN and XMR. Which algo should I mine then or which site is more relevant to me? Thanks!
Post
Topic
Board Pools (Altcoins)
Re: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.
by
thesunday
on 29/01/2018, 14:07:33 UTC
Is there a way to know what am I minig beside to look at 'auto switching ports per algo' table?
Post
Topic
Board Pools (Altcoins)
Re: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.
by
thesunday
on 29/01/2018, 07:15:37 UTC
If I set ethash algo switch mining and my gpu has 2GB, is it possible to mine those coins which do not need more that 3GB or I can't setup it like that? Could someone show me algo switch mining example with claymore? Thanks!
Post
Topic
Board Pools (Altcoins)
Re: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.
by
thesunday
on 28/01/2018, 16:05:26 UTC
Quote from: CryptoWaffle on January 28, 2018, 11:50:45 AM
Quote from: sadnblueish on January 28, 2018, 08:05:40 AM
I have been mining Eth+Sia using Claymore from last 12 hours but I dont see Sia Balance credit in balance page or Sia Wallet. I am not using AutoExchange for now.
Worker shows correct hashrate and an active worker ofcourse but no balance credit. In the past, I didnt have this issue. Is there any bug hit recently?

dual mining SIA is over for me and Decred is apparently the best alternative.


This happend to me to. So, sia is not woth dual mining anymore with gpu?
Post
Topic
Board Mining (Altcoins)
Re: RX 560 hashrates
by
thesunday
on 25/01/2018, 22:26:08 UTC
Quote from: tale07 on January 22, 2018, 12:34:33 PM
Does anyone have setup for xfx rx560 and which hashrate you've got on cryptnonight ?

xfx rx560 2gb, 492 H/s, Elpida memory. 1950 MHZ memory, 900 mV. I have to lower clocks, for now 1295 MHz, 1100 mV. Using Claymore, have to try sgminer. My first mining gpu and first bios moding Smiley Bought this one for 115 €.

https://s18.postimg.org/otpy4dmft/Screenshot_20180125_235613.png

https://s18.postimg.org/ajbsf1tjd/Screenshot_20180125_225200.png