Search content
Sort by
Showing 20 of 36 results by trip96
he said he apologies and wants to return the accounts
I'm waiting for him to return them
http://postimg.org/image/sklg5n0ad/
if he returns them its ok with me I don't want him banned ... if he returns them
I'm waiting for him to return them
http://postimg.org/image/sklg5n0ad/
if he returns them its ok with me I don't want him banned ... if he returns them
I doubt this has anything to do with the miner itself but I have the weirdest thing happening to me. It has happened twice now and I'm laughing / spooked.
So, I often put my miners on when I am going ot be away from my computer. I put on GPU and CPU miner and twice now when I have returned the CPU miner has been down. So I think, "it must have crashed... whatever" go to start it again... It's been deleted! GAH. This has happened twice to me know BTW. No idea what it's about. Came here to see if anyone has any insight. Perhaps my computer is ummm well.... haunted?
So, I often put my miners on when I am going ot be away from my computer. I put on GPU and CPU miner and twice now when I have returned the CPU miner has been down. So I think, "it must have crashed... whatever" go to start it again... It's been deleted! GAH. This has happened twice to me know BTW. No idea what it's about. Came here to see if anyone has any insight. Perhaps my computer is ummm well.... haunted?
v5.0 goes slower for me in -a mode 1 that is
4 x R9 280X used to go:
- on v4.2 1550 h/s
- on v5.0 1100 h/s (while windows is slow all the time and the driver crash, crashes and crashed.. restarting all the time after a few min)
Using -a 2 and they go 1550 h/s again
Using -a 1 -li 1 it also goes 1550 h/s
which one is better to use? they give the same speed for me anyway... -a 2 for less power usage or -a -li 1 as lower intensity (uses more power?)
-a 1 with -li 1 or just -a 2
4 x R9 280X used to go:
- on v4.2 1550 h/s
- on v5.0 1100 h/s (while windows is slow all the time and the driver crash, crashes and crashed.. restarting all the time after a few min)
Using -a 2 and they go 1550 h/s again
Using -a 1 -li 1 it also goes 1550 h/s
which one is better to use? they give the same speed for me anyway... -a 2 for less power usage or -a -li 1 as lower intensity (uses more power?)
-a 1 with -li 1 or just -a 2
I am also in this boat! Same exact findings. Thanks for the -a 1 and -li 1 options though!
Hey everyone. I have a simple question.
What script are you guys using to make sure your miner is running. I am having more thread hangs than usual and now i am going to use the -wd 1 flag. SO, I would love to know what you guys are using to reboot the miner when it closes.
Thanks!
What script are you guys using to make sure your miner is running. I am having more thread hangs than usual and now i am going to use the -wd 1 flag. SO, I would love to know what you guys are using to reboot the miner when it closes.
Thanks!
Bummer about the elpida memory. Also sucks that stilts BIOS does not work for me either.
Claymore, Anyway of getting around this via programming? Perhaps another BIOS would work or are we simply SOL?
Claymore, Anyway of getting around this via programming? Perhaps another BIOS would work or are we simply SOL?
@mirny GPU-Z - Graphics card tab (the default tab that opens) on the left hand side 10 or so rows down is the field "Memory Type"
Mine says GDDR5 (Elpida). I would assume yours will say GDDR5 (Hynix).
I have an update for people as well with the 280x issue. I have found a repository of STILT's BIOS for the 280 cards here:
https://mega.co.nz/#!45pk0ZiB!UXqe0mwS4HepxmIKAOpNtWNNRyoci_jD-bo49DTRb6o
Also, I confirmed that the flash was successful using GPU-Z and the card performed slightly worse and REALLY bogged my system up so that it was definitely unusable while mining. SO STILT'S BIOS is not working for me. Or perhaps the BIOS was not actually STILT's but the flash was successful according to the difference in BIOS enumeration and the fact that the BIOS loaded. I tried another BIOS I found online and it wouldn't even flash.
Anyways, that's all for my update. Anyone else having issues with the 280x feel free to try the link I provided and see if the BIOS in there works for you. I used the ATI flash utility to flash it. That I found here:
http://www.techpowerup.com/downloads/2306/atiflash-4-17/
Mine says GDDR5 (Elpida). I would assume yours will say GDDR5 (Hynix).
I have an update for people as well with the 280x issue. I have found a repository of STILT's BIOS for the 280 cards here:
https://mega.co.nz/#!45pk0ZiB!UXqe0mwS4HepxmIKAOpNtWNNRyoci_jD-bo49DTRb6o
Also, I confirmed that the flash was successful using GPU-Z and the card performed slightly worse and REALLY bogged my system up so that it was definitely unusable while mining. SO STILT'S BIOS is not working for me. Or perhaps the BIOS was not actually STILT's but the flash was successful according to the difference in BIOS enumeration and the fact that the BIOS loaded. I tried another BIOS I found online and it wouldn't even flash.
Anyways, that's all for my update. Anyone else having issues with the 280x feel free to try the link I provided and see if the BIOS in there works for you. I used the ATI flash utility to flash it. That I found here:
http://www.techpowerup.com/downloads/2306/atiflash-4-17/
Quote
If you could check to see what memory type (elpida?) your cards run that would help me out too.
if you tell me how to check what kind of memory I have,
then I can take a look, and I will tell you then.
because I have no idea how to check that.
and about that voltage, it depend on card, for some is 1,1V enough, another need at least 1,163V
it is total mismatch in my rigs, some of riser are powered, some are not, some are long, some, short, some usb,
some mobos are with molex connectors, some without,
but you know how is it like, if something is working, then dont touch, or even breath
GPU-Z will tell ya
I have 10 rigs + other 3 rigs friend of mine, all of them are 4xGPU, 280x (Sapphire, Asus) 7970 (Sapphire), all sorts of cards combined,
but I never had a problem with ver. 3.x, which is most people stating in here.
For tweaking I'm using MSI afterburner, if you have low hashrates and clocks are jumping,
just try to give more volts.
I did not made any other adjustments.
And as well I'm mining with 2-3 threads with CPU on those rigs.
It's running full throttle and nothing is lagging, everything is running stable.
So I can say there is no problem at all with Claymore miner.
but I never had a problem with ver. 3.x, which is most people stating in here.
For tweaking I'm using MSI afterburner, if you have low hashrates and clocks are jumping,
just try to give more volts.
I did not made any other adjustments.
And as well I'm mining with 2-3 threads with CPU on those rigs.
It's running full throttle and nothing is lagging, everything is running stable.
So I can say there is no problem at all with Claymore miner.
I would love to try any method to get this working. What voltage increase should I attempt?
I also would like to note that I do not have problems with the clock speeds bouncing around. Just lower than usual hashrate.
~360 h/s
edit: If you could check to see what memory type (elpida?) your cards run that would help me out too.
Hey I know you didn't say you updated 3.4 to deal with some of the 280x problems and it appears to have to do with those cards with Elpida memory. Do you (or does anyone for that matter) think this may be fixable with a BOIS firmware update on the card?
I hurt myself the other day and I'm immobile right now, looking for ways to sort this out. Thanks guys!
I hurt myself the other day and I'm immobile right now, looking for ways to sort this out. Thanks guys!
Claymore
I have a dummy rig I can set up to give you TeamViewer or some other remote access to if this would help solve the problem 280x problems.
I have a dummy rig I can set up to give you TeamViewer or some other remote access to if this would help solve the problem 280x problems.
Thanks, but it won't help. I can buy a couple 280x more, but who knows if at least one will have this problem. I will do it if I'm unable to find the reason.
I think the problem is around multi gpu handling. On one Rig 2x280x asus 900 h/s and where i have 4x280x saphire only 1400 h/s
I am only running one card though.
v3.3 is available:
- Improved mining speed up to 5%, depends on card, I get 650 h/s on stock 290x.
- Improved stability.
It seems I fixed issue with bad performance on 280x, though not sure, on my 280x it works fine.
- Improved mining speed up to 5%, depends on card, I get 650 h/s on stock 290x.
- Improved stability.
It seems I fixed issue with bad performance on 280x, though not sure, on my 280x it works fine.
Also no improvement on my 280x.
Check PM, you did not answer me.
Sorry friend. I did not see I had new messages. I have replied now.
v3.3 is available:
- Improved mining speed up to 5%, depends on card, I get 650 h/s on stock 290x.
- Improved stability.
It seems I fixed issue with bad performance on 280x, though not sure, on my 280x it works fine.
- Improved mining speed up to 5%, depends on card, I get 650 h/s on stock 290x.
- Improved stability.
It seems I fixed issue with bad performance on 280x, though not sure, on my 280x it works fine.
Also no improvement on my 280x.