Search content
Sort by
Showing 20 of 476 results by tutulfo
It looks like the author abandoned his project
It´s not abandoned, but I can not offer frecuently updates as support as time ago.
can you look into the BTC to mbtc thing ?
some pools changed it, now i can't use it anymore because all the calculations are off
I´m checking now, can you tell me some pools?
Ahash, Hashrefinery and Zpool..
that's the ones i find mentioned it..
Test master branch code
It looks like the author abandoned his project
It´s not abandoned, but I can not offer frecuently updates as support as time ago.
can you look into the BTC to mbtc thing ?
some pools changed it, now i can't use it anymore because all the calculations are off
I´m checking now, can you tell me some pools?
It looks like the author abandoned his project
It´s not abandoned, but I can not offer frecuently updates as support as time ago.
What should I do now?
This is visual only error, all works fine.
If you want to avoid this remove miningpoolhub.ps1 line
Remove-variable request
Hey guys, I hate to make noob fail post, but here I am. I have let this software churn for 12 hours and nothing is happening. Grateful for some help. I am running on test pc with only a single nvidia 1050 ti, I am back one version on the driver (April? 393?). Windows 10.
At first I was ambitious and enabled all the pools but I have cut down to one pool only, zpool, until i figure this out. I've left all the algorithms. Sometimes miner windows don't launch at all, sometimes they launch and I see a gpu memory exception flashing by.
But first things first - blue powershell screen - Is it supposed to start up and then shut down right away? I see many lines of red errors, but gone so fast I'm unable to read. At some point on the regular black dos startup screen I saw an error with some variable named "request" and I saw another error about the window width.
Thanks.
At first I was ambitious and enabled all the pools but I have cut down to one pool only, zpool, until i figure this out. I've left all the algorithms. Sometimes miner windows don't launch at all, sometimes they launch and I see a gpu memory exception flashing by.
But first things first - blue powershell screen - Is it supposed to start up and then shut down right away? I see many lines of red errors, but gone so fast I'm unable to read. At some point on the regular black dos startup screen I saw an error with some variable named "request" and I saw another error about the window width.
Thanks.
Something is going wrong, check log files from logs folder
Hey buddy, Megaminer is using x16s on zergpool to try bench RVN, might wanna fix that 
as you can imagine it wont complete bench even as it results in 100% rejected shares : /
Love the program
as you can imagine it wont complete bench even as it results in 100% rejected shares : /
Love the program
to add to that, it's also using RVN on blazepool to try and bench x16s for SuprminerSP/a
in addition, 6.3 is not accepting additional algo's that i add, such as sha256t (supported by both Jayddee(cpu) and Tpruvot(gpu)). it worked fine in mm 6.2.1 and earlier.
Check last master code, first bug fixed and sha256t included
there is no enemy miner available to ddl cause there is no url. how do i add it to the mine x16r?
Enemy miner is included as ccminerX16r
6.3 Release
---FEATURES CHANGES:
* Added Automatic EThLargementPill for Nvidia hashrate booster for 1080/1080ti
* New message at start if new Megaminer release available
* Updated nvdia-smi (needed for nvidia cards identification) to 397.64 release
* Added hamsi,bmw,whirpool and echo Algos for AMD
* Added allium algo for NVIDIA
* Added x16r for CPU
---MINERS CHANGES:
* Updated AMD SgminerAver to 1.4 Release
* Updated CPU cpuminer Jayddee to 3.8.8.1
* Updated CPU xmrig to 2.6.2
* Added NVDIA SuprminerSP 4a
* Added NVDIA Ccminer for Allium
---BUG FIXES:
* X16r,Blake2s and Neoscrypt not working for Unimining.net
* Nicehash not using europe location
--RELEASE NOTES
If you want to reuse your old config.txt file, and you want to use new EthLargementPill feature you must add this section @@ETHLARGEMENTPILL=ENABLED
If you use new ETHlargementpill feature you must delete ETHASH
Hi
I did updater nVidia drivers to latest 397.64 and now Megaminer wont start up.
If I run GPULIST.bat only that it shows is that pause command "Press any key to continue", but no any GPU´s
When I start it using start.bat what was working just fine before update I do get next messages:
First message:
"WARNING: No gpus for group was detected, activity based watchdog will be disabled for that group, this can happens if AMD beta blockchain drivers are installed or incorrect
@@gpugroups config"
Second message "NO MINERS!"
And this is log:
All GPU´s are shown in device manager and miners launched from command prompt works just fine, excavator works fine.
[UPDATE] Reverting back to 391.35 everything work like it should.
I did updater nVidia drivers to latest 397.64 and now Megaminer wont start up.
If I run GPULIST.bat only that it shows is that pause command "Press any key to continue", but no any GPU´s
When I start it using start.bat what was working just fine before update I do get next messages:
First message:
"WARNING: No gpus for group was detected, activity based watchdog will be disabled for that group, this can happens if AMD beta blockchain drivers are installed or incorrect
@@gpugroups config"
Second message "NO MINERS!"
And this is log:
Code:
05/09/2018 18:58:49...... Release 6.2.1
05/09/2018 18:58:50...... Starting Parameters: //Algorithm: //PoolsName: Zpool //CoinsName: //MiningMode: AUTOMATIC //Groupnames: //PercentToSwitch:
05/09/2018 18:58:50...... No gpus for group was detected, activity based watchdog will be disabled for that group, this can happens if AMD beta blockchain drivers are installed or incorrect @@gpugroups config
05/09/2018 18:59:00...... New interval starting.............
05/09/2018 18:59:34...... "AverageCpu = 2 % | MemoryUsage = 19,00 % | VirtualMemoryUsage = 9,42 % | PercentCFree = 88,44 % | Processes = 121 | Connections = 46"
05/09/2018 18:59:34...... Next interval will be 300
05/09/2018 18:59:34...... Loading Pools Information.............
05/09/2018 18:59:34...... Pool Zpool was responsive....
05/09/2018 18:59:34...... Detected 33 pools......
05/09/2018 18:59:34...... 33 pools left after min workers filter.....
05/09/2018 18:59:34...... Coindesk api was responsive..........
05/09/2018 18:59:34...... Files in miner folder: 46
05/09/2018 18:59:34...... Number of gpu groups: 0
05/09/2018 18:59:34...... Miners/Pools combinations detected: 0.........
05/09/2018 18:59:34...... NO MINERS!
05/09/2018 18:58:50...... Starting Parameters: //Algorithm: //PoolsName: Zpool //CoinsName: //MiningMode: AUTOMATIC //Groupnames: //PercentToSwitch:
05/09/2018 18:58:50...... No gpus for group was detected, activity based watchdog will be disabled for that group, this can happens if AMD beta blockchain drivers are installed or incorrect @@gpugroups config
05/09/2018 18:59:00...... New interval starting.............
05/09/2018 18:59:34...... "AverageCpu = 2 % | MemoryUsage = 19,00 % | VirtualMemoryUsage = 9,42 % | PercentCFree = 88,44 % | Processes = 121 | Connections = 46"
05/09/2018 18:59:34...... Next interval will be 300
05/09/2018 18:59:34...... Loading Pools Information.............
05/09/2018 18:59:34...... Pool Zpool was responsive....
05/09/2018 18:59:34...... Detected 33 pools......
05/09/2018 18:59:34...... 33 pools left after min workers filter.....
05/09/2018 18:59:34...... Coindesk api was responsive..........
05/09/2018 18:59:34...... Files in miner folder: 46
05/09/2018 18:59:34...... Number of gpu groups: 0
05/09/2018 18:59:34...... Miners/Pools combinations detected: 0.........
05/09/2018 18:59:34...... NO MINERS!
All GPU´s are shown in device manager and miners launched from command prompt works just fine, excavator works fine.
[UPDATE] Reverting back to 391.35 everything work like it should.
I have installed 397.64 and no problem here, I will upload today new code to github master with nvdia-smi updated to this release.
can i use it on windows 10 32bit system or not?
I will guess that the answer will be yes/no. Some of the miners that MegaMiner uses may require a 64bit platform.
true, you can use but you must delete all 64 bits miners or replace manually for 32 bits releases
how do i specific a coin? i want to mine rvn.
You can use start.bat selecting manual mode or also you can use coinsname parameter in your batch file like examples.
is there a way to run MM as a farm monitor only? on a PC without mining?
Yes, you must run start.bat and select monitorize your farm option
The monitor function is cool in 6.2, if only i knew how to set that up for al my rigs to read out at one machine 
While benching 1 rig i get this message, and it stops
DUPLICATED MINER X16R X16R ON N-CcminerX16r N-CcminerX16r
PS F:\MINING SOFTWARE\Megaminer-6.2\Megaminer-6.2>
While benching 1 rig i get this message, and it stops
DUPLICATED MINER X16R X16R ON N-CcminerX16r N-CcminerX16r
PS F:\MINING SOFTWARE\Megaminer-6.2\Megaminer-6.2>
Bug Fixed in latest release.
Monitor cfg is easy
- set @@APIPORT=9999 (or any number) in each monitorized machine
- set a list of monitorized machines in @@FARMRIGS variable (only on monitor machine)
- optional, set your mail cfg to get notifications when a rig goes offline
Can't get the monitor to work. Entered api 9999 in every rigs, and on the monitormachine entered local ip adresses and names ..
When i start i only get not responding, not even the local machine.
So unless there is some info missing, it does not work here.
Settings in router maybe ?
MM automatically add exclusion to firewall on monitored rig and local machine cant fail by this one, you can test:
- do you have api window open in each monitored rig?, is a powershell screen (not MM one).
- Check if you get a json response in your browser from your monitor machine, put http://MONITOREDIP:PORT
This is an example of config
@@FARMRIGS=[{"IpOrLanName":"moneymachine", "ApiPort":"9999","Notifications":"true"},{"IpOrLanName":"filemon", "ApiPort":"9999","Notifications":"true"},{"IpOrLanName":"localhost", "ApiPort":"9999","Notifications":"true"}]
The monitor function is cool in 6.2, if only i knew how to set that up for al my rigs to read out at one machine
While benching 1 rig i get this message, and it stops
DUPLICATED MINER X16R X16R ON N-CcminerX16r N-CcminerX16r
PS F:\MINING SOFTWARE\Megaminer-6.2\Megaminer-6.2>
While benching 1 rig i get this message, and it stops
DUPLICATED MINER X16R X16R ON N-CcminerX16r N-CcminerX16r
PS F:\MINING SOFTWARE\Megaminer-6.2\Megaminer-6.2>
Bug Fixed in latest release.
Monitor cfg is easy
- set @@APIPORT=9999 (or any number) in each monitorized machine
- set a list of monitorized machines in @@FARMRIGS variable (only on monitor machine)
- optional, set your mail cfg to get notifications when a rig goes offline
6.2.1 Release
---POOLS CHANGES:
* Zergpool: Changed stratum servers to algo.zergpool.com
---MINERS CHANGES:
* Updated Claymore Neoscrypt to 1.2
* Updated ccminerX16r to Enemy 1.08
* Added new miners X16s and x16r for AMD
---BUG FIXES:
* Duplicated algo in ccminerx16R
* Wrong algo x17 on ccminerx16R
6.2 Release
---FEATURES CHANGES:
* Cancelled miners due to fails will be retried after 6 hours
* New CryptonightV7, x16r, x16s ans x12 algos
---POOLS CHANGES:
* Enabled 24h mode for zergpool
---MINERS CHANGES:
* Updated ccminer tpruvot to 2.2.5
* Updated cpu xmrig to v2.6.0-beta2
* Added nvdia xmrig v2.6.0-beta1
* Updated Claymore ETH to 11.6
* Updated Phoenixminer to 2.8c
* Updated bminer to 6.1.0
* Replaced ccminer x16 for enemy 1.05 release
* Updated Claymore-cryptonote to 11.3
* Updated ccminer klausT to 8.21
* Updated cpuminer Jayddee to 3.8.7.2
---BUG FIXES:
* Blazepool Wallet not shown
* Claymore Neoscrypt for AMD not using selected devices
* Wrong Zergpool fee
---FEATURES CHANGES:
* Cancelled miners due to fails will be retried after 6 hours
* New CryptonightV7, x16r, x16s ans x12 algos
---POOLS CHANGES:
* Enabled 24h mode for zergpool
---MINERS CHANGES:
* Updated ccminer tpruvot to 2.2.5
* Updated cpu xmrig to v2.6.0-beta2
* Added nvdia xmrig v2.6.0-beta1
* Updated Claymore ETH to 11.6
* Updated Phoenixminer to 2.8c
* Updated bminer to 6.1.0
* Replaced ccminer x16 for enemy 1.05 release
* Updated Claymore-cryptonote to 11.3
* Updated ccminer klausT to 8.21
* Updated cpuminer Jayddee to 3.8.7.2
---BUG FIXES:
* Blazepool Wallet not shown
* Claymore Neoscrypt for AMD not using selected devices
* Wrong Zergpool fee
could you update Claymore Neoscrypt to 1.2?
thanks.
updated
6.2 Release
---FEATURES CHANGES:
* Cancelled miners due to fails will be retried after 6 hours
* New CryptonightV7, x16r, x16s ans x12 algos
---POOLS CHANGES:
* Enabled 24h mode for zergpool
---MINERS CHANGES:
* Updated ccminer tpruvot to 2.2.5
* Updated cpu xmrig to v2.6.0-beta2
* Added nvdia xmrig v2.6.0-beta1
* Updated Claymore ETH to 11.6
* Updated Phoenixminer to 2.8c
* Updated bminer to 6.1.0
* Replaced ccminer x16 for enemy 1.05 release
* Updated Claymore-cryptonote to 11.3
* Updated ccminer klausT to 8.21
* Updated cpuminer Jayddee to 3.8.7.2
---BUG FIXES:
* Blazepool Wallet not shown
* Claymore Neoscrypt for AMD not using selected devices
* Wrong Zergpool fee
---FEATURES CHANGES:
* Cancelled miners due to fails will be retried after 6 hours
* New CryptonightV7, x16r, x16s ans x12 algos
---POOLS CHANGES:
* Enabled 24h mode for zergpool
---MINERS CHANGES:
* Updated ccminer tpruvot to 2.2.5
* Updated cpu xmrig to v2.6.0-beta2
* Added nvdia xmrig v2.6.0-beta1
* Updated Claymore ETH to 11.6
* Updated Phoenixminer to 2.8c
* Updated bminer to 6.1.0
* Replaced ccminer x16 for enemy 1.05 release
* Updated Claymore-cryptonote to 11.3
* Updated ccminer klausT to 8.21
* Updated cpuminer Jayddee to 3.8.7.2
---BUG FIXES:
* Blazepool Wallet not shown
* Claymore Neoscrypt for AMD not using selected devices
* Wrong Zergpool fee
is there a way to set the PoolFee for a particular pool?
The fee for zergpool is now 0.5%, a week ago it was 0.25%... a week before that it was free.
The fee for zergpool is now 0.5%, a week ago it was 0.25%... a week before that it was free.
I will upload a new release soon with this bug fixed.
So i'm new to megaminer (long time user of mpm) and i see it has a lot more optimized options for AMD cards, and i can now utilize all the optimized miners for AMD.
My question is:
Has anyone gotten x16r to work with megaminer.
https://github.com/brian112358/sgminer-x16r/releases
I run it standalone fine, but when i try it under mega miner, i get a "detecting miner error"
any help would be great.
thanks.
My question is:
Has anyone gotten x16r to work with megaminer.
https://github.com/brian112358/sgminer-x16r/releases
I run it standalone fine, but when i try it under mega miner, i get a "detecting miner error"
any help would be great.
thanks.
I have been testing and I can´t make it work with blazepool manually. I think it only works with certains pools/protocols
it works with zergpool standalone. i haven't tried it with blazepool yet.
edit:
just tried with blazepool and it works fine. here's my startup line
sgminer.exe -k x16r -o stratum+tcp://x16r.mine.blazepool.com:3636 -u pewpewohnoyoudidnot -p AMDi5930K1,c=BTC -I 20 --gpu-threads 2 --gpu-platform 1
Your startup line in my system don´t work (I must change gpu-platform to 2).