Search content
Sort by
Showing 10 of 10 results by unkunku
Hello ,
I have a setup consisting of 4x 7950 GPU's, with an corsair AX 1200W PSU supply, 10GB ram.
Everything is working fine except that 3 of the GPU's are throttling all the time, however the hashrate is not decreasing. Is this bad in any way? This started to happen when I upgraded the drivers to 13.X ( can't remember which number ).
I have a setup consisting of 4x 7950 GPU's, with an corsair AX 1200W PSU supply, 10GB ram.
Everything is working fine except that 3 of the GPU's are throttling all the time, however the hashrate is not decreasing. Is this bad in any way? This started to happen when I upgraded the drivers to 13.X ( can't remember which number ).
Hello,
Sorry to ask a question regarding feathercoin. But would really appreciate some help.
I have 4x 7950's, and mining at a hashrate of 2400 khash.
Now all calculators say I should get 100 FTC per day, but when I mined on wemineftc.com for 6 hours I got 0.7FT(!), and now today it's a little better but I'm getting projected 3 FTC for 4 hours of mining.
This does not sound right to me at all, my hashrate is showing correctly at wemineftc.com too, something wrong at my part or is the payments just stalled or not showing correctly?
Thanks in advance!
Sorry to ask a question regarding feathercoin. But would really appreciate some help.
I have 4x 7950's, and mining at a hashrate of 2400 khash.
Now all calculators say I should get 100 FTC per day, but when I mined on wemineftc.com for 6 hours I got 0.7FT(!), and now today it's a little better but I'm getting projected 3 FTC for 4 hours of mining.
This does not sound right to me at all, my hashrate is showing correctly at wemineftc.com too, something wrong at my part or is the payments just stalled or not showing correctly?
Thanks in advance!
The GPU which has the problem is connected via a 16x riser, also yes I've also noticed some problems when running with afterburner. However here I haven't even installed afterburner, only MSI kombustor.
Added this info to the thread start
Added this info to the thread start
Hello everyone 
I've just setted up my Litecoin mining rig consisting of 3 x 7950 GPU's, all connected to the motherboard through 2st 16x and 1st 1x riser.
Now to the problem, two cards are running absolutely fine. However one of the cards ( connected furthest away from mobo, if it makes any difference ), as soon as you press start on GuiMiner - scrypt for that card I get (avg):0.000h/s | Q:7 A:0 R:0 HW:0 E:0% U:0.0/m and then just shortly thereafter everything freezes for 1 sec and screen blinks and " amd drivers stopped responding and has recovered" pops up. The GPU which has the problem is connected via a 16x riser.
The card is completely useless at this stage, I noticed that one can run the card on low settings for 7950 but then one gets insanely(!) low hashrate of around 50...
My specs are
Mobo: Gigabyte 990XA-UD3 rev 3.0
PSU: Corsair AX1200W
RAM: 10GB
CPU : Cheapest I could find.
GPU: 3 x 7950 connected with risers.
Afterburner not installed, MSI kombustor installed and running though
Can't really understand why this is happening, started out when I upgraded from 2x 7950 to 3 x 7950. It's one of the old GPU's too that's messing, not the new one I added. I downgraded to drivers 12.8, still same problem ( had initially the latest )
Been stuck with this sh*t now for 2 hours. Will give a small bounty of 5 LTC, the solution should work when I go to 4 x 7950 too ( as I've planned with my rig ).
Thanks in advance!
I've just setted up my Litecoin mining rig consisting of 3 x 7950 GPU's, all connected to the motherboard through 2st 16x and 1st 1x riser.
Now to the problem, two cards are running absolutely fine. However one of the cards ( connected furthest away from mobo, if it makes any difference ), as soon as you press start on GuiMiner - scrypt for that card I get (avg):0.000h/s | Q:7 A:0 R:0 HW:0 E:0% U:0.0/m and then just shortly thereafter everything freezes for 1 sec and screen blinks and " amd drivers stopped responding and has recovered" pops up. The GPU which has the problem is connected via a 16x riser.
The card is completely useless at this stage, I noticed that one can run the card on low settings for 7950 but then one gets insanely(!) low hashrate of around 50...
My specs are
Mobo: Gigabyte 990XA-UD3 rev 3.0
PSU: Corsair AX1200W
RAM: 10GB
CPU : Cheapest I could find.
GPU: 3 x 7950 connected with risers.
Afterburner not installed, MSI kombustor installed and running though
Can't really understand why this is happening, started out when I upgraded from 2x 7950 to 3 x 7950. It's one of the old GPU's too that's messing, not the new one I added. I downgraded to drivers 12.8, still same problem ( had initially the latest )
Been stuck with this sh*t now for 2 hours. Will give a small bounty of 5 LTC, the solution should work when I go to 4 x 7950 too ( as I've planned with my rig ).
Thanks in advance!