Ninjastic
Search content
Sort by
Showing 8 of 8 results by vagmor
Post
Topic
Board Mining (Altcoins)
Re: PhoenixMiner 5.5c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
by
vagmor
on 10/02/2021, 11:50:34 UTC
Quote from: murgorx on Today at 10:35:11 AM
hello guys,

yesterday I went with the latest nVidia drivers, updated to 5.5c and changed the 6pin to SATA cables on my riser boards directly to power them by the 6pin cables from the PSU.
Before, when I was running with the SATA adapters and not the latest drivers, 5.4c miner I had a stable rig, runnin each RTX 3080 at 94.5mhs with 70PW and +700Mhs.

Now , one of the cards is hashing lower than expected - with -0.5mh, when the GPU is not connected via HDMI cable and with -1.5mhs when its streaming.
If I start playing and tweaking , a 2nd card starts losing MHs and starts crashing...

I looked that the miner and it seems that some of the cards are getting 8-10 degrees hotter than the others, and one card is running always @ 100% fan speed... If i try to lower the fan speed in MSI, the card throttles within minutes.

And all this was stable AF 2 days ago, while i was running the cards with the SATA Connectors...
May the problem be caused by the drivers or does it look like a hardware problem?

Thanks for your help!
Thermal pads degrading probably and you need to replace them with better...
Post
Topic
Board Mining (Altcoins)
Re: PhoenixMiner 5.4c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
by
vagmor
on 12/01/2021, 13:14:35 UTC
Quote from: ipp2 on Today at 12:48:06 AM
A little feedback:

-dagrestart <n> Restart the miner when allocating buffer for a new DAG epoch. The
      possible values are: 0 - never, 1 - always, 2 - auto (the miner decides depending on the driver version).
      This is relevant for 4 GB AMD cards, which may have problems with new DAG epochs after epoch 350.

This is good, but what we need is a -dagRunScript. Which of course, runs a script when a new DAG begins to build. Right now the 30 series works OK with the HiveOS "OC Delay" but we need to restart the miner when the new DAG hits to let HiveOS use it's OC Delay feature.

+1
Post
Topic
Board Mining (Altcoins)
Re: PhoenixMiner 5.4c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
by
vagmor
on 27/12/2020, 13:32:20 UTC
Quote from: dragonmike on Today at 10:26:52 AM
Quote from: doctorman on December 21, 2020, 03:01:22 PM
Quote from: theerachate.p on December 21, 2020, 11:14:20 AM
Quote from: dragonmike on December 20, 2020, 12:43:44 PM
3060 Ti here - works well, unless...

- I set max overclock at start (only incorrect shares are generated - I need to start lower and increase)
- Epoch changes (same result as above)

Please fix.


happens to me as well (RTX3070), I thought it was a bug on the driver or the bios, I was updating/flashing for 2 hours before figured what you just said lol

Interesting.. thanks for reporting this.. did you try any other miner see if the same issue persists?
so it is not a driver issue, it is a general rtx 3000 series issue

If I start on +1200 mem clock I can survive  but I still get bunch of invalid shares ,  if i start under +1000mem clock and go up I get no invalid shares even up to 1500+for now I start them at +900 and go up to +1200 since you never know when the Epoch change happens and the whole thing goes down if you have it set above +1250 or so memory clock




I have an MSI and a Zotac  3060 ti ,   Zotac runs hotter and faster , but more prone to invalid shares, same story as above applies to both

I get 59-60 MH on the 900+ mem
and can get close to 64 MH if I go up to +1500 and give it some  power like 66% to 68%
Happens when dual-mining with ZIL too.
Have you tried another miner?

same here with 2 3060ti to 2 different rigs with exactly this behavior
Post
Topic
Board Mining (Altcoins)
Re: PhoenixMiner 5.4c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
by
vagmor
on 26/12/2020, 17:19:35 UTC
Quote from: aloneforever on Today at 04:22:22 PM
hello, i just try to mining with phoenixminer but all what i can see after start it is :
2020.12.26:18:17:08.565: main Phoenix Miner 5.1c Windows/msvc - Release build
2020.12.26:18:17:08.565: main Cmd line: -pool eu1.ethermine.org:4444 -pool2 us1.ethermine.org:4444 -wal ........................ -coin eth
2020.12.26:18:17:08.615: main CUDA version: 11.0, CUDA runtime: 8.0
2020.12.26:18:17:08.649: main No OpenCL platforms found
2020.12.26:18:17:08.649: main Available GPUs for mining:
2020.12.26:18:17:08.649: main GPU1: GeForce GTX 1080 Ti (pcie 2), CUDA cap. 6.1, 11 GB VRAM, 28 CUs
2020.12.26:18:17:08.649: main GPU2: GeForce GTX 1080 Ti (pcie 3), CUDA cap. 6.1, 11 GB VRAM, 28 CUs
 and after this all waht i see is : Press any key to continue and close the software

I have similar problem but with version 5.4c i have post before but still no answer from anybody
the miner crashing on startup...

Phoenix Miner 5.4c Windows/msvc - Release build
-----------------------------------------------

CUDA version: 11.0, CUDA runtime: 8.0
No OpenCL platforms found
Available GPUs for mining:
GPU1: GeForce RTX 3060 Ti (pcie 3), CUDA cap. 8.6, 8 GB VRAM, 38 CUs

C:\Users\vag.TOTHEMA\Desktop\eth miner>pause
Press any key to continue . . .

latest drivers...
latest software version... no luck
Post
Topic
Board Mining (Altcoins)
Re: PhoenixMiner 5.4c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
by
vagmor
on 25/12/2020, 17:59:51 UTC
Quote from: vagmor on Today at 12:50:25 PM
hello new to the forum
I'm trying to make phoenix miner work with my 3060ti with the latest drivers and 5.4c is not working.. it crashes on startup but 5.3b works fine and from what i read id supposed to happen the other way
Can somebody help me?

Sorry to bump the message but it is 2 days now that I'm trying to run the newer version but still no luck
NVidia drivers 460.89 and phoenix miner 5.4c crashing on start up... and 5.3b works fine but unable to initialize nvlm

Anyone with the same problem? Any solution?
Post
Topic
Board Mining (Altcoins)
Re: PhoenixMiner 5.4c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
by
vagmor
on 25/12/2020, 12:50:25 UTC
hello new to the forum
I'm trying to make phoenix miner work with my 3060ti with the latest drivers and 5.4c is not working.. it crashes on startup nut 5.3b works fine and from what i read id supposed to happen the other way
Can somebody help me?
Post
Topic
Board Investor-based games
Re: Emicoin.com - EMI4 review.
by
vagmor
on 23/06/2015, 13:57:27 UTC
me the same thing i tried to withdraw and said not less than 0.1 and release all my investments and try to withdraw and is pending... hope i'll get my bitcoin back
Post
Topic
Board Hardware
Re: ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH
by
vagmor
on 30/04/2015, 20:06:46 UTC
has anyone try to overclock it above 425 Mhz? i run it on stock fan with temps 53/49 and c the fan at full speed about 3960 rpm and no x on acic chips and about 1375 Hf/s when i try to go above 425 still i have no hardware errors but my hash rate drops at 1200 Gh/s or lower? any explanation for that?? and my s5 looks rock solid having it run for more than 4 days at 425Mhz
P.S. i have allready ordered 2 delta fans  http://www.ebay.co.uk/itm/271775072487?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT