Search content
Sort by
Showing 6 of 6 results by w8term3lon
So I got my rig to work. FINALLY!!! 
(Using the modded Motherboard Bios.)
What I did to get it working.
1.) I plugged my ssd into another pc and went into Disk management.
2.) Deleted all volumes
3.) Coverted the entire disk to GPT
4.) Used Rufus and flashed Windows 10 ISO onto a USB drive with Partition Scheme set as GPT
5.) On the rig BIOS change PEG0 and PEG1 to auto and disable Above 4G decoding.
6.) On the boot menu ONLY allow UEFI
7.) Booted the USB
8.) Installed windows and AMD driver 16.11.1
9.) Went into BIOS and changed Integrated graphics to PEG
10.) Changed PEG0 and PEG1 to GEN1 and enabled Above 4G decoding.
11.) Save and restart.
12.)SUCCESS!!!
I currently don't know which driver to use though since 16.11.1 keeps crashing when I have 5 GPUs installed, any suggestions?
(Using the modded Motherboard Bios.)
What I did to get it working.
1.) I plugged my ssd into another pc and went into Disk management.
2.) Deleted all volumes
3.) Coverted the entire disk to GPT
4.) Used Rufus and flashed Windows 10 ISO onto a USB drive with Partition Scheme set as GPT
5.) On the rig BIOS change PEG0 and PEG1 to auto and disable Above 4G decoding.
6.) On the boot menu ONLY allow UEFI
7.) Booted the USB
8.) Installed windows and AMD driver 16.11.1
9.) Went into BIOS and changed Integrated graphics to PEG
10.) Changed PEG0 and PEG1 to GEN1 and enabled Above 4G decoding.
11.) Save and restart.
12.)SUCCESS!!!
I currently don't know which driver to use though since 16.11.1 keeps crashing when I have 5 GPUs installed, any suggestions?
Depends on which GPU you have. I have RX 580s and I have 17.5.1 running just fine. Just have to use the driver patcher, atikmdag.
So I have Sapphire Rx480 8GB oc. How are you supposed to use the driver patcher?
So I got my rig to work. FINALLY!!!
(Using the modded Motherboard Bios.)
What I did to get it working.
1.) I plugged my ssd into another pc and went into Disk management.
2.) Deleted all volumes
3.) Coverted the entire disk to GPT
4.) Used Rufus and flashed Windows 10 ISO onto a USB drive with Partition Scheme set as GPT
5.) On the rig BIOS change PEG0 and PEG1 to auto and disable Above 4G decoding.
6.) On the boot menu ONLY allow UEFI
7.) Booted the USB
8.) Installed windows and AMD driver 16.11.1
9.) Went into BIOS and changed Integrated graphics to PEG
10.) Changed PEG0 and PEG1 to GEN1 and enabled Above 4G decoding.
11.) Save and restart.
12.)SUCCESS!!!
I currently don't know which driver to use though since 16.11.1 keeps crashing when I have 5 GPUs installed, any suggestions?
(Using the modded Motherboard Bios.)
What I did to get it working.
1.) I plugged my ssd into another pc and went into Disk management.
2.) Deleted all volumes
3.) Coverted the entire disk to GPT
4.) Used Rufus and flashed Windows 10 ISO onto a USB drive with Partition Scheme set as GPT
5.) On the rig BIOS change PEG0 and PEG1 to auto and disable Above 4G decoding.
6.) On the boot menu ONLY allow UEFI
7.) Booted the USB
8.) Installed windows and AMD driver 16.11.1
9.) Went into BIOS and changed Integrated graphics to PEG
10.) Changed PEG0 and PEG1 to GEN1 and enabled Above 4G decoding.
11.) Save and restart.
12.)SUCCESS!!!
I currently don't know which driver to use though since 16.11.1 keeps crashing when I have 5 GPUs installed, any suggestions?
It's hard to help you if you dont describe exactly where you're getting a black screen at. Did 4 cards work fine with 4g disabled? Did 5 install and code 12? Give details.
It goes straight to black screen right after the loading circle, which comes after the bios image. (the part where it shows the mobo maker and press del to go into bios). So up to now its been black screen. I left it on for the duration.
I just tried this, it doesn't work. The same thing happened. It shows a backlit black screen after loading the BIOS screen.
I'm using Rufus since you can't only install UEFI windows 10 using Media creation tool.
So this is what I did:
So it boots with the bios logo.
Then it shows a loading screen without the windows logo.
After that it shows the loading circles with the msi bios for a split second. (literally for 1 second, but somehow I managed to get a picture of it)
Right after it shows the backlit blackscreen.
I have been using the modded version of the bios already. I have also tried the 1.7 Official version. Both do not work.
I also have tried using only 1 GPU(not on riser), no cards(using on board Graphics), 1 GPU(on riser) and all GPU(on risers).
I'm using Rufus since you can't only install UEFI windows 10 using Media creation tool.
So this is what I did:
So it boots with the bios logo.
Then it shows a loading screen without the windows logo.
After that it shows the loading circles with the msi bios for a split second. (literally for 1 second, but somehow I managed to get a picture of it)
Right after it shows the backlit blackscreen.
I have been using the modded version of the bios already. I have also tried the 1.7 Official version. Both do not work.
I also have tried using only 1 GPU(not on riser), no cards(using on board Graphics), 1 GPU(on riser) and all GPU(on risers).
This is what I need to do to get it working:
Disable 4g Decoding. PCIe Gen 1.
Install 1 card at a time. Make sure Windows is happy with the card.
On the 5th card, Windows should report Code 12 on 2-3 cards after installing the drivers.
NOW reboot into BIOS, turn on 4G decoding. Make sure fast boot and any other special boot options are disabled.
Windows now boots after a brief black screen.
Now you can go on to install GPU 6+.
If I try it any other way then exactly as I described, the screen just goes black after showing the BIOS splash screen.
Just tried it with no luck. It's been on blackscreen for the past 5min.
Hello, I'm new to the forum,
my configuration:
Intel Celeron G3930 7th gen(Kaby Lake)
MSI GAMING Z170A PRO CARBON
Kingston 8 GB DDR4
Intel 120GB SSD
7x Sapphire Rx 480 8GB OC (with modded bios)
EVGA Supernova 1200w
I installed the new BIOS and then installed the modded one, but every time I try to boot into windows it shows a backlit black screen and whenever I try booting a UEFI install usb it shows the windows loading circles and then backlit black screen. I've left it on for 24 hours with the same result.
Without the 4G decoding the system is fine, but whenever I try turning it on the system just does a backlit blackscreen, also I have PEG0 and PEG1 set to Gen1
What should I do? I'm really desperate right now, any help is appreciated.
my configuration:
Intel Celeron G3930 7th gen(Kaby Lake)
MSI GAMING Z170A PRO CARBON
Kingston 8 GB DDR4
Intel 120GB SSD
7x Sapphire Rx 480 8GB OC (with modded bios)
EVGA Supernova 1200w
I installed the new BIOS and then installed the modded one, but every time I try to boot into windows it shows a backlit black screen and whenever I try booting a UEFI install usb it shows the windows loading circles and then backlit black screen. I've left it on for 24 hours with the same result.
Without the 4G decoding the system is fine, but whenever I try turning it on the system just does a backlit blackscreen, also I have PEG0 and PEG1 set to Gen1
What should I do? I'm really desperate right now, any help is appreciated.
Hello,
First, install this bios (A single gpu main port) ... https://www.dropbox.com/s/bk22xpc6afayexc/E7A12IMS.7Z?dl=0
Then install windows in UEFI mode. (Before installing, change the partition of the disk to GPT).
After installing windows. Install Amd driver
reboot.
Now activates 4G on the bios, you do not need to activate or change anything else.
Reboot.
Plug all gpu and wait
Good Luck Sorry my english is not very good
I just tried this, it doesn't work. The same thing happened. It shows a backlit black screen after loading the BIOS screen.
I'm using Rufus since you can't only install UEFI windows 10 using Media creation tool.https://i.imgur.com/dj7LdN6.png
So this is what I did:
https://i.imgur.com/hdMLAsb.jpg
https://i.imgur.com/sQpGInR.jpg
https://i.imgur.com/yugLee4.jpg
https://i.imgur.com/7pZEppT.jpg
So it boots with the bios logo.
https://i.imgur.com/kJDiTKA.jpg
Then it shows a loading screen without the windows logo.
https://i.imgur.com/wMmyCuw.jpg
After that it shows the loading circles with the msi bios for a split second. (literally for 1 second, but somehow I managed to get a picture of it)
https://i.imgur.com/gyyJF7g.jpg
Right after it shows the backlit blackscreen.
https://i.imgur.com/JY4UPfj.jpg
I have been using the modded version of the bios already. I have also tried the 1.7 Official version. Both do not work.
I also have tried using only 1 GPU(not on riser), no cards(using on board Graphics), 1 GPU(on riser) and all GPU(on risers).
Hello, I'm new to the forum,
my configuration:
Intel Celeron G3930 7th gen(Kaby Lake)
MSI GAMING Z170A PRO CARBON
Kingston 8 GB DDR4
Intel 120GB SSD
7x Sapphire Rx 480 8GB OC (with modded bios)
EVGA Supernova 1200w
I installed the new BIOS and then installed the modded one, but every time I try to boot into windows it shows a backlit black screen and whenever I try booting a UEFI install usb it shows the windows loading circles and then backlit black screen. I've left it on for 24 hours with the same result.
Without the 4G decoding the system is fine, but whenever I try turning it on the system just does a backlit blackscreen, also I have PEG0 and PEG1 set to Gen1
What should I do? I'm really desperate right now, any help is appreciated.
my configuration:
Intel Celeron G3930 7th gen(Kaby Lake)
MSI GAMING Z170A PRO CARBON
Kingston 8 GB DDR4
Intel 120GB SSD
7x Sapphire Rx 480 8GB OC (with modded bios)
EVGA Supernova 1200w
I installed the new BIOS and then installed the modded one, but every time I try to boot into windows it shows a backlit black screen and whenever I try booting a UEFI install usb it shows the windows loading circles and then backlit black screen. I've left it on for 24 hours with the same result.
Without the 4G decoding the system is fine, but whenever I try turning it on the system just does a backlit blackscreen, also I have PEG0 and PEG1 set to Gen1
What should I do? I'm really desperate right now, any help is appreciated.