Ninjastic
Search content
Sort by
Showing 7 of 7 results by weeminer
Post
Topic
Board Mining (Altcoins)
Re: [Mining OS] SimpleMining.net - Easy to use GPU MINING Operating System
by
weeminer
on 04/04/2018, 01:38:15 UTC
Hi Tytanick ,

Do you have any fix on the below issue?
It only happen on gpu0 and gpu1 for 12 gtx1070
Thanks


Quote from: weeminer on March 31, 2018, 11:28:20 AM
I also have the same issue but after reapplied few times the overclock setting it works..keep trying setting each card with individual clock setting

Quote from: AnusXpander on March 30, 2018, 09:52:33 AM
Thanks for answering, I can try but i don't think that's a proper solution since it happens with multiple GPUs in same rig. Usualy clocks are set bad after reboot, next I have to reload miner, clocks are fine but after a while they are starting to lower clock settings.Look at those examples:

ETH - Total Speed: 360.276 Mh/s, Total Shares: 20, Rejected: 0, Time: 00:09
ETH: GPU0 26.656 Mh/s, GPU1 26.666 Mh/s, GPU2 30.689 Mh/s, GPU3 30.672 Mh/s, GPU4 30.594 Mh/s, GPU5 30.826 Mh/s, GPU6 30.629 Mh/s, GPU7 30.442 Mh/s, GPU8 30.745 Mh/s, GPU9 30.802 Mh/s, GPU10 30.754 Mh/s, GPU11 30.802 Mh/s

ETH - Total Speed: 363.554 Mh/s, Total Shares: 1280, Rejected: 0, Time: 09:52
ETH: GPU0 26.617 Mh/s, GPU1 26.635 Mh/s, GPU2 30.792 Mh/s, GPU3 31.130 Mh/s, GPU4 30.638 Mh/s, GPU5 31.160 Mh/s, GPU6 31.118 Mh/s, GPU7 30.946 Mh/s, GPU8 31.180 Mh/s, GPU9 31.155 Mh/s, GPU10 31.000 Mh/s, GPU11 31.184 Mh/s

Sometimes almost all of them are in default setting or lower than I desire.

Quote

If you attached a monitor on GPU0, will that fix the problem?

I have a few older rigs with RX480 Reference, with first 2 GPUs (6xRX480) always acting up.

Solution was to use a dummy HDMI adapter, and problem went away.
Post
Topic
Board Mining (Altcoins)
Re: [Mining OS] SimpleMining.net - Easy to use GPU MINING Operating System
by
weeminer
on 31/03/2018, 11:28:20 UTC
I also have the same issue but after reapplied few times the overclock setting it works..keep trying setting each card with individual clock setting

Quote from: AnusXpander on March 30, 2018, 09:52:33 AM
Thanks for answering, I can try but i don't think that's a proper solution since it happens with multiple GPUs in same rig. Usualy clocks are set bad after reboot, next I have to reload miner, clocks are fine but after a while they are starting to lower clock settings.Look at those examples:

ETH - Total Speed: 360.276 Mh/s, Total Shares: 20, Rejected: 0, Time: 00:09
ETH: GPU0 26.656 Mh/s, GPU1 26.666 Mh/s, GPU2 30.689 Mh/s, GPU3 30.672 Mh/s, GPU4 30.594 Mh/s, GPU5 30.826 Mh/s, GPU6 30.629 Mh/s, GPU7 30.442 Mh/s, GPU8 30.745 Mh/s, GPU9 30.802 Mh/s, GPU10 30.754 Mh/s, GPU11 30.802 Mh/s

ETH - Total Speed: 363.554 Mh/s, Total Shares: 1280, Rejected: 0, Time: 09:52
ETH: GPU0 26.617 Mh/s, GPU1 26.635 Mh/s, GPU2 30.792 Mh/s, GPU3 31.130 Mh/s, GPU4 30.638 Mh/s, GPU5 31.160 Mh/s, GPU6 31.118 Mh/s, GPU7 30.946 Mh/s, GPU8 31.180 Mh/s, GPU9 31.155 Mh/s, GPU10 31.000 Mh/s, GPU11 31.184 Mh/s

Sometimes almost all of them are in default setting or lower than I desire.

Quote

If you attached a monitor on GPU0, will that fix the problem?

I have a few older rigs with RX480 Reference, with first 2 GPUs (6xRX480) always acting up.

Solution was to use a dummy HDMI adapter, and problem went away.
Post
Topic
Board Mining (Altcoins)
Re: [Mining OS] SimpleMining.net - Easy to use GPU MINING Operating System
by
weeminer
on 26/03/2018, 05:38:45 UTC
Dear Tytanick,

With the recent update on nvidia overclock setting, I noticed that my 12x GTX1070 rigs have some issue applying the overclock setting.
It happened on my gpu0 and gpu1 where the overclock failed to apply on this 2 gpu. both gpu will stay at stock clock.
I have to reapplied few times the overclock setting then it can be successfully applied the setting on both gpu0 and gpu1.
Anyone here did encountered this for nvidia rig?
Thanks

Best Regards,
Wee
Post
Topic
Board Mining (Altcoins)
Re: [ANN] dstm's ZCash / Equihash Nvidia Miner v0.5.8 (Linux / Windows)
by
weeminer
on 30/01/2018, 01:24:34 UTC
Quote from: weeminer on January 29, 2018, 03:59:10 PM
Quote from: siforek on January 26, 2018, 09:23:46 PM
Quote from: dstm on January 25, 2018, 03:05:20 PM
Quote from: siforek on January 24, 2018, 01:03:25 AM
Quote from: betopica on January 24, 2018, 12:17:59 AM
Quote from: siforek on January 23, 2018, 10:41:35 PM
I tried switching from ewbf to dstm for the 2nd time yesterday. Initially it started out 5-10% faster than ewbf which is awesome, however after about 10-15 minutes it slowed more & more to the point where it was as much as 40% slower than ewbf, at which point I switched back.
I've talked to others that do not have the same problem, yet they were running less GPUs than I am. I have multiple rigs with 13x1070s & 1070tis.

I have the same problem with DSTM 0.5.6, 0.5.7 and 0.5.8. Stable and fast as hell, but after one hour it starts to make less and less sol/s.. in three hours I'm getting half rate (I start with 680-700 sol/s and after 4 hours I end with 230 sol/s)... so my only solution is restart the miner. All the time no more than 60ºC, fan speed at 60%. I have two rigs, same specs and the same problem: Asrock H110 PRO + 13 Nvidia 1080Ti (up five different brands, mixed). Every rig have 4 PSUs: 3 x 1000W + 1 x 1600W and just one cable to power every riser (4 pin molex version) so no problems about power or temperature. I use simplemining without overclock, just power at 200W, no extra mhz in gpu core or memory. Is it a configuration problem?

Yep same motherboard, never had this issue with any other miner but I'd love to get it working & get the extra sols. Anyone else have any ideas?

Are you all using SMOS?
Some SMOS user reported something similar recently.
https://bitcointalk.org/index.php?topic=2021765.msg27398311#msg27398311

If you take a look at the provided data: affected systems seems to have a lot 'nvidia-settings' processes running, this might be the reason for the performance drop after some time. So pls check if this is also the case on your system - It looks like SMOS is starting nvidia-setting (most likely for monitoring) without properly closing it.


Having this issue & yes, on SMOS. Would just replace SMOS with Ubuntu if I could but only have remote access to rigs. Might need to mod SMOS source to fix :/

I am also having this issue..running with smos. With 12 x gtx1060..rig started with 3700sol/s..after running for 2 hours the hash rate drop to 2000sol/s. Is there anyway we can fix this in smos ? I tried both 0.5.7 and 0.5.8 same result..Now trying 0.5.6 version

I guys..I am running v0.5.6 in smos with 12x gtx1060..Somehow manage to get it stable running around 3700sol/s for 12hours..No decrease in hashrate so far...I assume it's stable right now compare to v0.5.7 and v0.5.8 in smos..this might be the resolution for those having similar issue
Post
Topic
Board Mining (Altcoins)
Re: [ANN] dstm's ZCash / Equihash Nvidia Miner v0.5.8 (Linux / Windows)
by
weeminer
on 29/01/2018, 15:59:10 UTC
Quote from: siforek on January 26, 2018, 09:23:46 PM
Quote from: dstm on January 25, 2018, 03:05:20 PM
Quote from: siforek on January 24, 2018, 01:03:25 AM
Quote from: betopica on January 24, 2018, 12:17:59 AM
Quote from: siforek on January 23, 2018, 10:41:35 PM
I tried switching from ewbf to dstm for the 2nd time yesterday. Initially it started out 5-10% faster than ewbf which is awesome, however after about 10-15 minutes it slowed more & more to the point where it was as much as 40% slower than ewbf, at which point I switched back.
I've talked to others that do not have the same problem, yet they were running less GPUs than I am. I have multiple rigs with 13x1070s & 1070tis.

I have the same problem with DSTM 0.5.6, 0.5.7 and 0.5.8. Stable and fast as hell, but after one hour it starts to make less and less sol/s.. in three hours I'm getting half rate (I start with 680-700 sol/s and after 4 hours I end with 230 sol/s)... so my only solution is restart the miner. All the time no more than 60ºC, fan speed at 60%. I have two rigs, same specs and the same problem: Asrock H110 PRO + 13 Nvidia 1080Ti (up five different brands, mixed). Every rig have 4 PSUs: 3 x 1000W + 1 x 1600W and just one cable to power every riser (4 pin molex version) so no problems about power or temperature. I use simplemining without overclock, just power at 200W, no extra mhz in gpu core or memory. Is it a configuration problem?

Yep same motherboard, never had this issue with any other miner but I'd love to get it working & get the extra sols. Anyone else have any ideas?

Are you all using SMOS?
Some SMOS user reported something similar recently.
https://bitcointalk.org/index.php?topic=2021765.msg27398311#msg27398311

If you take a look at the provided data: affected systems seems to have a lot 'nvidia-settings' processes running, this might be the reason for the performance drop after some time. So pls check if this is also the case on your system - It looks like SMOS is starting nvidia-setting (most likely for monitoring) without properly closing it.


Having this issue & yes, on SMOS. Would just replace SMOS with Ubuntu if I could but only have remote access to rigs. Might need to mod SMOS source to fix :/

I am also having this issue..running with smos. With 12 x gtx1060..rig started with 3700sol/s..after running for 2 hours the hash rate drop to 2000sol/s. Is there anyway we can fix this in smos ? I tried both 0.5.7 and 0.5.8 same result..Now trying 0.5.6 version
Post
Topic
Board Mining (Altcoins)
Re: [Mining OS] SimpleMining.net - Easy to use GPU MINING Operating System
by
weeminer
on 26/01/2018, 12:19:43 UTC
Quote from: Dennis77 on January 25, 2018, 12:26:31 PM
@tytanick

Is it possible that you add this miner : https://www.bminer.me/? It runs much better as Dstm not only with better Rates, it use less Power then all other Miners withe better Hash Rates.

Yeah tytanick, can you please help to add bminer into your OS..
Encounter unstability with dstm miner after running for 2 hours with 12x GTX1060 .
Post
Topic
Board Mining (Altcoins)
Re: [Mining OS] SimpleMining.net - Easy to use GPU MINING Operating System
by
weeminer
on 25/01/2018, 05:43:46 UTC
Quote from: razor_amd on January 19, 2018, 09:48:49 PM
Can you please add bminer to your SMOS? https://bitcointalk.org/index.php?topic=2519271.0

I have a problem with dstm miner in your SMOS. Using 12 x P106 mining cards, they all work good for about 2-3 hours, after that time, the hashrate is starting to decline from 3700+ Sol/s to 2000 Sol/s for unknown reason. When using ewbf miners, the speed is lower and the machine is restarting more frequently, but the miner stays at 3500+ Sol/s. bminer should be better alternative to both of these miner programs, and I found out that it gives higher performance and also better stability.



I am having the same problem as you..running 12x GTX1060...tried DSTM miner..after 2-5 hours..hashrate drop from 3700 to 2000 sol/s.
EWBF having lower hashrate but somehow stable after running 12 hours...
Developer please help to add in bminer .
Thanks