Hey thanks for the reply, I have looked on their site and tried contacting them, and will continue to do so.

It's a Whatspower P11.

Hey I would be interested in locating one, or some PSU.  I have an M20S, and also a whatsminer D1 which has a P11 on it.  The M20S is running full power non-stop, but the D1 is not.  Yes I understand the D1 is an altcoin miner but I mine DCR with it paying every day in BTC.  The P11 on my D1 is toast, would love to find one.  Thanks

Hey so I have a Whatsminer M10 that would fire up and recognize the 3 boards, but only show chips on 2 boards and 0 chips on the third board.

I checked voltage across the 2 pole connectors from the PSU and it read 14 volts.  As I was checking, the small cover with the control board slid down and contacted both pole connectors at the same time.  The machine shut down or went into what I thought might be protection mode.  I killed the power and waited 10 minutes, then fired it back up.  An error code 210 showed up, and now there is 0 volts between the pole connectors.  I disassembled and checked the PSU and can't find a fuse inside that might have blown, other than the one main fuse where the power comes in.

When I refresh the screen on the main miner control panel on my computer it won't read anything over 1s either.

Is there something I should look for, or has anyone else experienced this?

Makes me very nervous since it's impossible to find spare parts right now.  Maybe someone knows where I can find parts these days?

Any help or advice would be greatly appreciated, thanks in advance.

Hey so I have a Whatsminer D1 that would fire up and recognize the 3 boards, but only show 70 chips on 2 boards and 0 chips on the third board.

I checked voltage across the 2 pole connectors from the PSU and it read 14 volts.  As I was checking, the small cover with the control board slid down and contacted both pole connectors at the same time.  The machine shut down or went into what I thought might be protection mode.  I killed the power and waited 10 minutes, then fired it back up.  An error code 210 showed up, and now there is 0 volts between the pole connectors.  I disassembled and checked the PSU and can't find a fuse inside that might have blown.

Is there something I should look for, or has anyone else experienced this? 

Makes me very nervous since it's impossible to find spare parts right now.  Maybe someone knows where I can find parts these days?

Any help or advice would be greatly appreciated, thanks in advance.