Unfortunately there’s a hardware issue with 1080tis and most older nvidia cards. As the DAG grows over time the hashrate drops. My 1080tis used to get 54mh, now they get around 44.

Claymore hasn't been updated in a very very long time. Switch to another miner like Phoenix or TeamRed

Mine stopped last night. Looks like we're done with 3GB cards on eth.

Try a fresh usb image.

Mine is still going. Make sure you’re on the latest claymore.

I’ve had the same problem for months. I just keep refreshing the page and logging in and after several tries it always eventually works. Sometimes take 10 tries or more.

Me neither

Yes. Bminer has this feature. Add  -devices 0,1,2,5,6

Go back 2 or 3 pages for instructions on how to do it by ssh.

Thank you! I thought that might be it, but didn't want to update the rig for nothing. Got mine working now too

I have the same problem. Before the mining this flashes on the screen quickly:

Thread 'unnamed' panicked with message:
_called `Option::unwrap()` on a `None` value_
See grin.log for further details.

What hashrate are you getting with this setup from an rx580?

Thanks for working so hard on this. We all really appreciate it! Good luck.

REALLY looking forward to this. I have one ASIC where one board runs 10 degrees higher than the other two.

Has anybody tried re-pasting the heat-sync or something to try to lower temps?

I don't know for sure, but when I get weird errors usually what fixes them is a new USB stick with a fresh install of the latest SMOS.

Mine is still auto starting ETHlargement since I posted how to add it to rc.local a couple weeks ago. My rig rebooted 5 hours ago and updated, and yet it's still auto starting ethlargement. I'm not sure why it's not working for you.

Just curious, why do you need static ip? you're not connected to the same router I guess?

my 1080ti's range from 43 to 53. You can try playing with the mem and core, but some cards just won't go any higher. Start with core 0 and mem 0 and work up from there. I had a card that hashed 47 at 800, but 53 at 400. your PL is wastefully high too. try 160 and you'll probably see no difference in hashrate.

Here's what I did so it automatically starts when the miner boots:

1. SSH into the miner, type the following:
     sudo vim /etc/rc.local
2. edit the file by adding the ETHlargement command above the miner script. Here's what mine looks like below (FYI, to edit the file with vim, type "a" on your keyboard, then edit the file as normal, hit "Esc" on your keyboard when done, then type":wq" hit Enter and it'll save. Make sure you have the "&", it's important and makes the command run in the background and stay running.

----------
#!/bin/sh
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.

sudo /root/utils/OhGodAnETHlargementPill &
bash /root/utils/rclocal.sh &

exit 0
~                                                                                                                                                          
~                          
---------
DONE!
reboot the miner by typing "sudo reboot", BAM problem solved.

Sorry for the late reply, but I've been using Claymore for Monero7 since the fork. you just have to add the "-pow7 1" option to the rig group config. here's my setup:

xpool stratum+tcp://xmr-us-west1.nanopool.org:14444 -xwal BAHBLAH.BAHBLAH.$rigName/me@me.com -xpsw x -mport -3333 -r 1 -pow7 1