Search content
Sort by
Showing 20 of 60 results by yuancraft
Nice!!!!
Can you show me where do you point your thermometer to?
I have one of those, but I get different readings across the heat sink at about 3cm from it.
Re: [GROUP BUY3] In-Stock Bitmain AntMiner S1 180GH/S Ships on 12/20 & 12/21
sushi, what's the extra cost of UPS Express shipping?
i think you no need express, cuz 3~5 days the package will in you door step
Re: [Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner
ok CM 1200W gold, running 1 ant and 1 BFL 60GH, power meter show 11.95V, and other 2 ant with 1000W CM gold draw 740W power meter show 11.80V hashing very well,
check all power cable all tight very tight.
i thing not the power issue
check all power cable all tight very tight.
i thing not the power issue
Ok... could be an issue. Make sure all your power is tight and you are supplying enough.
Re: [Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner
done many time, shut off wait for 30m and same, is hash 160~170GH
Shut it down, wait a couple, reboot.
Is there a trick to getting the antminer to hold on to a reassigned static ip?
I go into the Network > Interfaces > Wan > and change the settings to an address on 192.168.1.x that is unassigned on my network, but when I hit save and apply it just hangs. I've tried a few different times now, waiting 2 min, 5 min, 10 min, and after plugging the cable back into the router, the miner hasn't been reassigned to the new address. I used the advance ip scanner utility and it still shows the same default address at 192.168.2.xx, which I can now not connect to either. After shorting the pins to do a hard reset, I can re-connect again on 192.168.2.99.
Any ideas?
I go into the Network > Interfaces > Wan > and change the settings to an address on 192.168.1.x that is unassigned on my network, but when I hit save and apply it just hangs. I've tried a few different times now, waiting 2 min, 5 min, 10 min, and after plugging the cable back into the router, the miner hasn't been reassigned to the new address. I used the advance ip scanner utility and it still shows the same default address at 192.168.2.xx, which I can now not connect to either. After shorting the pins to do a hard reset, I can re-connect again on 192.168.2.99.
Any ideas?
you need to change you LAN before change the WAN
LAN tab change to DHCP hit switch > save&apply . wait a bit
then back to WAN tab change the ip that u want > save&apply
try the steps and let us know..
https://github.com/AntMiner/AntGen1/blob/master/manual/AntMiner%20FAQ.pdf?raw=true
have you tried scanning your own miner? i had no issues reiping my miners...
change u subnet to 192.168.2.x
then download http://www.advanced-ip-scanner.com/
and scan form 192.168.2.1 to 192.168.2.254
Just received my miner, but there is no sticker with the miners ip-address, how do i find it?
Adjusted my own ip for the 192.168.2. range and tried opening 192.168.2.100 till 130 in my browsers but no response.
The red light is on and the lan led is blinking so it seems it started.. but what now ?
Can't see any DHCP request on my router either, so it seems it's configured with static ip.
Adjusted my own ip for the 192.168.2. range and tried opening 192.168.2.100 till 130 in my browsers but no response.
The red light is on and the lan led is blinking so it seems it started.. but what now ?
Can't see any DHCP request on my router either, so it seems it's configured with static ip.
change u subnet to 192.168.2.x
then download http://www.advanced-ip-scanner.com/
and scan form 192.168.2.1 to 192.168.2.254
Yes i scanned and found that the same ip address that i had change, but still cant ping or connect or do anything, the miner just flashing the green led and the LAN led also flash green only (with no noise btw).
If there any way to fully reset the control board to the factory setting? pls tell me T_T
trying thank you !!
@bclcjunkie
is work i'm back to 192.168.2.99
and this FAQ just update an hour ago, thank you BITMAIN !! (i try the old ver of FAQ but it not work) this new one good
thank you !!!!
https://bitcointalk.org/index.php?topic=344970.msg3836387#msg3836387
change ip to 192.168.1.181 then dadah
cant ping cant login in web config page
just see green flash led, green led on RJ45 port .....
have you tried scanning your own miner? i had no issues reiping my miners...
change u subnet to 192.168.2.x
then download http://www.advanced-ip-scanner.com/
and scan form 192.168.2.1 to 192.168.2.254
Just received my miner, but there is no sticker with the miners ip-address, how do i find it?
Adjusted my own ip for the 192.168.2. range and tried opening 192.168.2.100 till 130 in my browsers but no response.
The red light is on and the lan led is blinking so it seems it started.. but what now ?
Can't see any DHCP request on my router either, so it seems it's configured with static ip.
Adjusted my own ip for the 192.168.2. range and tried opening 192.168.2.100 till 130 in my browsers but no response.
The red light is on and the lan led is blinking so it seems it started.. but what now ?
Can't see any DHCP request on my router either, so it seems it's configured with static ip.
change u subnet to 192.168.2.x
then download http://www.advanced-ip-scanner.com/
and scan form 192.168.2.1 to 192.168.2.254
Yes i scanned and found that the same ip address that i had change, but still cant ping or connect or do anything, the miner just flashing the green led and the LAN led also flash green only (with no noise btw).
If there any way to fully reset the control board to the factory setting? pls tell me T_T
@yuancraft you're my hero 
Great app!
The miner had 192.168.2.37.
Great app!The miner had 192.168.2.37.
u lucky guy and dont change ip address to subnet 192.168.1.x
or you will go to my situation
BITMAIN HELP
Just received my miner, but there is no sticker with the miners ip-address, how do i find it?
Adjusted my own ip for the 192.168.2. range and tried opening 192.168.2.100 till 130 in my browsers but no response.
The red light is on and the lan led is blinking so it seems it started.. but what now ?
Can't see any DHCP request on my router either, so it seems it's configured with static ip.
Adjusted my own ip for the 192.168.2. range and tried opening 192.168.2.100 till 130 in my browsers but no response.
The red light is on and the lan led is blinking so it seems it started.. but what now ?
Can't see any DHCP request on my router either, so it seems it's configured with static ip.
change u subnet to 192.168.2.x
then download http://www.advanced-ip-scanner.com/
and scan form 192.168.2.1 to 192.168.2.254
have you also changed your pc's ip to 192.168.1.x subnet?
HELP !!
i follow to this step
Change IP address of the AntMiner [Option]
http://s12.postimg.org/xocz9fyvf/033_networksetting_009_WAN2.jpg
chang ip to 192.168.1.x > save&apply > lost connection with miner .
cant ping 192.168.2.x cant ping 192.168.1.x
im trying to reset but my miner is new version
here the pic
http://i.imgur.com/Ua75bkY.jpg
i follow to this step
Change IP address of the AntMiner [Option]
http://s12.postimg.org/xocz9fyvf/033_networksetting_009_WAN2.jpg
chang ip to 192.168.1.x > save&apply > lost connection with miner .
cant ping 192.168.2.x cant ping 192.168.1.x
im trying to reset but my miner is new version
here the pic
http://i.imgur.com/Ua75bkY.jpg
yes of course
you need a same subnet to connect
i follow to this step
Change IP address of the AntMiner [Option]
http://s12.postimg.org/xocz9fyvf/033_networksetting_009_WAN2.jpg
chang ip to 192.168.1.x > save&apply > lost connection with miner .
cant ping 192.168.2.x cant ping 192.168.1.x
im trying to reset but my miner is new version
here the pic
http://i.imgur.com/Ua75bkY.jpg
Re: The 3rd Round Auction for the AntMiner S1 Dual Blades, 120 units, 24 hours
Fixed for missing the fixed price auction customers...
thank you for fixed up !!
i'm paid right now !!
Re: The 3rd Round Auction for the AntMiner S1 Dual Blades, 120 units, 24 hours
Re: The 3rd Round Auction for the AntMiner S1 Dual Blades, 120 units, 24 hours
6.ooBTC for 1 S1 x2? WOW BITMAIN is getting rich
