Quote from: tsagas_lr on January 08, 2018, 01:35:36 PM

Quote from: Shadafaka on January 08, 2018, 04:28:50 AM

Attempting to mine right now with 7x 1080 Ti and not having any luck. I have another rig with a 1080 Ti and a 1080 running smoothly at around 23 S/s.

However, with the 7 card rig, the solution rate is very low and it eventually crashes. I have 60gb of virtual memory set up on a secondary ssd, not the OS ssd. At one point there was no crash, but like I said the sol/s was very low (35-45 with all 7 cards running). Any ideas?

Just tried again, build status -2 before pausing. The sol rates are good at first, but once the miner starts detecting more cards, the other ones decrease in sol rate.

Try to run every card separately using the command -d # counting from 0.

I've got the same issue. My rig (windows) has 7 cards (RX580) and the miner stops when activating the 6th or 7th card. I started mining on each card separately and can run on 5 cards without any issues. Starting the 6th and/or 7th card stops it when receiving work from pool. Without any error. I can't see any memory or cpu related issue that causes the last 2 cards to start.

Any tips?

UPDATE: The issue was related to my virtual memory. It was set to 32Gb, which isn't enough as for each card/process there is 6.5Gb reserved. Raised the virtual memory to 64Gb, and it's running fine on 7 cards now.

theosb

Posts

Merits