New user. I setup Minera using BFMiner and using solo.ckpool.org. I'm also using an Avalon Nano miner. (I set this up as a 'lotto' machine)

Minera shows it's logging into the pool and is mining. However, when I check my stats on ckpool, its not showing anything. I can plug the stick into my PC and run BFminer and it'll show on the pool. What gives? I've double, triple checked my user ID/BTC address -- everything is as it should be.

I've even tried turning off, "append JSON conf" in settings. However, it looks like it still using the JSON (as you can see below) even though Minera says, "Miner will start with this syntax:
/usr/bin/screen -dmS bfgminer /var/www/minera/minera-bin/bfgminer -o stratum+tcp://solo.ckpool.org:3333 -u 1FWFFjsqqoL6ZUq179dmt7stUgs5jEudwC -p x -S ICA:/dev/ttyACM0 --set-device ICA:baud=115200 --set-device ICA:reopen=timeout --set-device ICA:work_division=1 --set-device ICA:fpga_count=1 --set-device ICA:probe_timeout=100 --set-device ICA:timing=0.22 --api-listen
Warning you selected to not append the JSON conf."

This is from the log...

[2019-08-19 18:40:18] Started bfgminer 5.4.2-7-g9f781b87
[2019-08-19 18:40:18] Loaded configuration file /var/www/minera/conf/miner_conf.json
[2019-08-19 18:40:19] Found ICA 0 at /dev/ttyACM0
[2019-08-19 18:40:19] Probing for an alive pool
[2019-08-19 18:40:19] Testing pool stratum+tcp://solo.ckpool.org:3333
[2019-08-19 18:40:20] Message from pool 0: Authorised, welcome to solo.ckpool.org 1FWFFjsqqoL6ZUq179dmt7stUgs5jEudwC!
[2019-08-19 18:40:20] Stratum authorisation success for pool 0
[2019-08-19 18:40:20] Pool 0 stratum+tcp://solo.ckpool.org:3333 alive
[2019-08-19 18:40:20] Pool 0 is hiding block contents from us
[2019-08-19 18:40:20] Network difficulty changed to 10.2T (72.90E)
[2019-08-19 18:40:20] New block: ...e923482124fe84af diff 10.2T (72.90E)

Serion

Posts

Merits