Quote from: CryptoWatcher420 on October 09, 2017, 08:31:08 PM

Quote from: hamteivos on October 09, 2017, 02:08:14 PM

I am using Z97M-plus motherboard.
So i downloaded the ethos 1.2.5.iso and then use HDDRawCopy1.10Portable to copy to pen drive and HDD.
I can entered my motherboard bios, and set the pen drive to boot,
but after that, I see only "_" underscore on top left on the screen, and no text appearing.
keyboard numlock is working, i assume is not hardware problem.
I didn't use any GPU, use only the mobo inboard gpu to boot.

Anyone encounter this problem before?
Tried with HDD 1.0TB, not working,
Tried with eth 1.2.4.iso not working as well.

put it on an ssd, pen drives are CRAP to have an OS on it even ethos, pen drives were never designed to be used as an OS drive, other thing id say is you be doing something wrong lol, but if anything slap it on an ssd. not a magnetic hard drive, a SSD but by the sounds of it either iso is corrupted or you are doing something wrong even though putting ethos on a drive is very easy to do, have you tried it with a gpu? I feel as if your not telling us everything

I tried with SSD. same problem.
I am using onboard GPU, I will try with a proper GPU see if can solve the issue or not.

hamteivos

Posts

Merits