Quote from: powaaa on October 24, 2017, 08:58:22 AM

Quote from: leonix007 on October 24, 2017, 05:16:33 AM

Quote from: powaaa on October 23, 2017, 04:51:22 PM

I have a problem. I have a 6x rig with Sapphire Pulse RX580 8GB, using Win10 and the mining driver. GPU0 have 30,5 MH/s and the other 5 cards run at 28 MH/s. I using a start.bat, wich executed (with the highest privileges) by the task planer from win10. It works with 780W from the wall. Why does GPU0 run faster than the others?

Could it be that the clocks differ on the other cards, and the 1 GPU hits your config.

Quote

I tried to start the start.bat manually via remote desktop and run as an administrator and get all cards at 30,5 MH/s. Clocks are always the same, but the power consumption raise up to 980W from the wall (-cvddc and -mvddc doesnt work).

What can i do?

it is imperative in Claymore that the more hashrate the more power consumption occur. so I guess this is normal

if it starts automatically at startup:
Clocks are all the same. CPU Core Clock 1130, GPU Memory Clock 2150, cpu and mem voltages are 850mv on all cards (GPU-Z) | 780W from wall
GPU0 29.990 Mh/s, GPU1 27.928 Mh/s, GPU2 27.911 Mh/s, GPU3 27.916 Mh/s, GPU4 27.930 Mh/s, GPU5 27.975 Mh/s

if i start the bat file manually via remote:
clocks are the same: 1130 core, 2150 mem but voltage now differ GPU0 830mv, GPU1 850mv, GPU2 970mv, GPU3 930mv, GPU4 930mv, GPU5 970mv | 900W from wall and cant adjust the voltage via afterburner (i can choose -70mv but GPU-Z show me no change)
GPU0 29.979 Mh/s, GPU1 30.067 Mh/s, GPU2 30.007 Mh/s, GPU3 30.055 Mh/s, GPU4 30.004 Mh/s, GPU5 30.021 Mh/s

I have seen this when using Remote Desktop, It doesn't happen using Team Viewer.

miner49er2107

Posts

Merits