Quote from: Akyboy on Today at 03:56:07 PM

Quote from: parple on Today at 09:21:33 AM

Quote from: Akyboy on February 09, 2022, 07:29:21 PM

Hi Guys,

I am thinking of starting dual mining with my non LHR 3070s.
ETH+TONCOIN

I would appreciate if somebody can suggest a good OC for this combination.

Also, I would like to know what wallet are you using for TONCOIN and if pool suggested in .bat file is only and best option so far?

Thanks

Quote from: Akyboy on February 09, 2022, 07:29:21 PM

Hi Guys,

I am thinking of starting dual mining with my non LHR 3070s.
ETH+TONCOIN

I would appreciate if somebody can suggest a good OC for this combination.

Also, I would like to know what wallet are you using for TONCOIN and if pool suggested in .bat file is only and best option so far?

Thanks

Hello fellow miners,
So I figured out wallet and pool (whalestonpool)
Here is screenshot of miner after 1h:
https://i.imgur.com/eAvnjfy.png

For some reason I cannot get 60Mh/s for ETH on first 4 cards. I checked clocks and they are all around same for all cards expect PL for some of them.

You should lock the core clock rather than using PL. If you using windows in the .bat file add '--cclk 1110' to extraparameters and it will lock the core. Set the memory speed to 1100 (I recommend MSI Afterburner in Windows) or 2200 in HiveOS and it should get you good results. You'll then need to work out the best memory overclock as it will depend on the card.
I have 2 3070s running in HiveOS with the core at 1110 and memory 2500 (That's about 1250 in windows) and I get just over 61MH/s with Eth and 1.1GH/s on TON with power usage around 140watts according to the software.
Adding a higher core clock might improve the TON speed but will also increase the power usage.
When mining Eth and TON make sure to restart the miner after applying any new overclocks.
Hope this helps.

Thanks a lot for the help!

If you can please clarify some things for me as I am confused a little

When I lock --1110, does that mean that in Afterburner I can leave PL @ 100%?
Whatever memory clock I put in Afterburner, anywhere from 1000-1200 I get DAG verification failing , can i prevent failed dags somehow? (it's not biggie on the single test card I am working on, but on a rig of 10 cards this can take a bit of time to do the auto repair)

Yeah lock the core to 1110 and leave the power limit at 100%. Locking the core drops the power usage.
If you're getting DAG errors it's normally caused by the memory overclock. You could try setting the overclock with afterburner right after the DAG for ETH is created.

parple

Posts

Merits