Quote from: batsonxl on March 21, 2021, 07:16:43 PM

Quote from: smc_masters on March 21, 2021, 05:34:50 PM

Quote from: smc_masters on March 21, 2021, 04:54:00 PM

Quote from: dazmann on March 21, 2021, 03:41:45 PM

Quote from: smc_masters on March 21, 2021, 01:45:40 PM

Running a eig with 6× rx580's aorus on the Asus prime 270-a and after managing to detect all 6 cards i get a restart everytime i start the miner.
No error message. It justs restarts after 15 seconds of running the miner..
I have changed risers and psu's. Switched some cards as well.
Any idea?

Ps: Running the 5.5c version on 20.11.2

If you mean the computer is restarting you got a power problem. Try using the slow dag creation command, maybe all your cards are generating the dag at the same time and activating the PSU failsafe.

How do i do that exactly?
I pasted -lidag command in the start miner file but it still restarted when initiating the dag.
Seems like a power issue yes but i cant figure exactly what.
I have switched psu's as well..

Also.. i know this might not be relevant..i tried using another miner and the pc restarted the same.
So if it is a psu failsafe issue how do i configure it in phoenix?

Tried to read the instructions but to no avail...
Anyone help? I ll be gratefull as im fighting with this all day now..

did you tried 1 by 1 gpus? is it restarst if you run only 1 gpu? you can add this -gpus 1 it will run 1st gpu

Yes I did. It works OK with up to 4 cards. Then restarts when 5th and 6th added.
My psu's are 1200 platinum.
It restarts as if the power is switched off.

smc_masters

Posts

Merits