Quote from: PhoenixMiner on February 18, 2018, 05:19:24 AM

Quote from: flatounet on February 16, 2018, 03:07:07 PM

i think im in error ,but i see miner restard because low hash....
i removed -minRigSpeed 129 after , and now ,no anymore probleme .....

The -minRigSpeed option works with 5 minutes average hashrate. It doesn't care about the effective hashrate, because it can be quite random. So if the 5 min average hashrate speed drops under 129 MH/s in your case, the miner will be restarted. To avoid unnecessary restarting, put this option to your normal hashrate minus about half of one card's hasrate. I.e. if your normal hashrate is 132 MH/s with 5 GPUs, set -minRigSpeed 119

Quote from: shmeker on February 16, 2018, 08:18:08 PM

This will be work (-cclock 1150 -mclock 2170 -cvddc 850 -mvddc 850) with this minner??? Or how to set the clocks? Huh

There is no support for these options yet. We are working on it and it will be released in version 2.7b.

Quote from: rockk on February 17, 2018, 06:54:34 AM

2.7 has almost 2x more stales then 2.6

There is no reason for that - should be the same or slightly lower. We have seen some wild variations on stales because of luck (when the average block time drops and a few blocks are found in quick succession there are a lot more stale shares). We will include pool stats in a later version to show the average round time, latencly, etc.

Quote from: flatounet on February 17, 2018, 01:27:34 PM

yup , watchdog work fine ,phoenix 2.7a working fine , ( i desactivated a gpu in windows/hardware )
phoenix found a probleme and restart , good.

but i dont have see security about T°c limit ,when a card reach 90°C
stop made it minnning for 5 minutes for cold down & restart it ?

im a bit crazy but i will leave rig 3 weeks .....

got usb watchdog key working fine , phoenix have watchdog for GPU ....
sonoff for restart rig when probleme

just "need" GPU T° check for security / dont burn/kill it ....

You mean like -tstop and -tstart options of Claymore? We will try to include these in 2.7.

Quote from: KougarLOB on February 17, 2018, 06:02:00 PM

I have seen a small 1.5-2% speed improvement poolside over Claymore 11.0 on my Nvidia 1060 rig. Thank you.

My RX-480 cards are also 2-5% faster but not enough improvement to keep them on Ethash. Their MH/s output has dropped 33% in the last few months. Flashed a few BIOs and tweeked with Afterburner. Is there a magic bullet to regain old speeds to 480s or is this the new norm for ETH algo?

33% drop in hashrates? It looks like you are not using the blockchain driver (or the newest AMD drivers switched to COMPUTE mode). Please google AMD blockchain driver and install it (after removing the current driver with DDU).

Quote from: Lebaaaron on February 18, 2018, 02:38:42 AM

some people seems to test it already 2.7a

You can find 2.7a in this post: https://bitcointalk.org/index.php?topic=2647654.msg30259176#msg30259176 but please note that it is a beta release - do not try it on a large scale (i.e. multple rigs). We test each beta version for at least 12-24 hours on about a dozen testing rigs with various GPUs but the configurations in the field are much more diverse than our test rigs so some errors can't be found in this testing.

Quote from: axe0911 on February 18, 2018, 04:51:45 AM

Truly a great miner.

I have been facing a challenge when one of the GPU hangs, the miner does not restart.

It gives an error that reboot.bat couldn't be located.

Also, why is the GPU hanging ?

Code:

17580:04:04:52.516: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x289abbab48807a4927ff272c8d39ff2d1460bd952c7228c4c98536ca6a554c44","0x4e99a30e99712c8c6e292fe7ba6b27a37c7ced12e2ec7862f31fb676724cb404","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4df57e"]}
17580:04:04:52.516: eths Eth: New job #289abbab from asia1.ethermine.org:4444; diff: 4000MH
17580:04:04:52.990: main Eth speed: 57.131 MH/s, shares: 284/0/0, time: 5:16
17580:04:04:52.990: main GPUs: 1: 28.367 MH/s (142) 2: 28.763 MH/s (142)
17580:04:04:59.633: main Eth speed: 56.980 MH/s, shares: 284/0/0, time: 5:16
17580:04:04:59.633: main GPUs: 1: 28.374 MH/s (142) 2: 28.606 MH/s (142)
17580:04:04:59.677: eths Eth: Send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x36496db","0xdf1e1ca4401117200633d5a343be0ae9c05e3d9e630c497b76f2409afb2b402e"]}

17580:04:04:59.772: eths Eth: Received: {"id":6,"jsonrpc":"2.0","result":true}
17580:04:05:04.687: main Eth speed: 22.871 MH/s, shares: 284/0/0, time: 5:16
17580:04:05:04.687: main GPUs: 1: 0.000 MH/s (142) 2: 22.871 MH/s (142)
17580:04:05:08.344: main GPU1: 59C 17%, GPU2: 67C 17%
17580:04:05:09.686: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

17580:04:05:09.766: main Eth speed: 28.610 MH/s, shares: 284/0/0, time: 5:16
17580:04:05:09.766: main GPUs: 1: 0.000 MH/s (142) 2: 28.610 MH/s (142)
17580:04:05:09.778: eths Eth: Received: {"id":5,"jsonrpc":"2.0","result":["0x289abbab48807a4927ff272c8d39ff2d1460bd952c7228c4c98536ca6a554c44","0x4e99a30e99712c8c6e292fe7ba6b27a37c7ced12e2ec7862f31fb676724cb404","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4df57e"]}
17580:04:05:14.845: main Eth speed: 28.609 MH/s, shares: 284/0/0, time: 5:16
17580:04:05:14.845: main GPUs: 1: 0.000 MH/s (142) 2: 28.609 MH/s (142)
17580:04:05:19.687: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

17580:04:05:19.687: eths Eth: Send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x34c999c","0xdf1e1ca4401117200633d5a343be0ae9c05e3d9e630c497b76f2409afb2b402e"]}

17580:04:05:19.781: eths Eth: Received: {"id":5,"jsonrpc":"2.0","result":["0x289abbab48807a4927ff272c8d39ff2d1460bd952c7228c4c98536ca6a554c44","0x4e99a30e99712c8c6e292fe7ba6b27a37c7ced12e2ec7862f31fb676724cb404","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4df57e"]}
17580:04:05:19.873: eths Eth: Received: {"id":5,"jsonrpc":"2.0","result":["0x289abbab48807a4927ff272c8d39ff2d1460bd952c7228c4c98536ca6a554c44","0x4e99a30e99712c8c6e292fe7ba6b27a37c7ced12e2ec7862f31fb676724cb404","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4df57e"]}
17580:04:05:19.873: eths Eth: Received: {"id":6,"jsonrpc":"2.0","result":true}
17580:04:05:19.923: main
17580:04:05:19.923: main Eth: Mining ETH on asia1.ethermine.org:4444
17580:04:05:19.923: main Eth speed: 28.607 MH/s, shares: 284/0/0, time: 5:17
17580:04:05:19.923: main GPUs: 1: 0.000 MH/s (142) 2: 28.607 MH/s (142)
17580:04:05:19.923: main Eth: Accepted shares 284 (8 stales), rejected shares 0 (0 stales)
17580:04:05:19.923: main Eth: Incorrect shares 0 (0.00%), est. stales percentage 2.82%
17580:04:05:19.923: main Eth: Maximum difficulty of found share: 1274.3 GH (!)
17580:04:05:19.923: main Eth: Average speed (5 min): 54.926 MH/s
17580:04:05:19.923: main Eth: Effective speed: 59.71 MH/s; at pool: 59.71 MH/s
17580:04:05:19.923: main
17580:04:05:25.002: main Eth speed: 28.243 MH/s, shares: 284/0/0, time: 5:17
17580:04:05:25.002: main GPUs: 1: 0.000 MH/s (142) 2: 28.243 MH/s (142)
17580:04:05:29.688: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

17580:04:05:29.782: eths Eth: Received: {"id":5,"jsonrpc":"2.0","result":["0x289abbab48807a4927ff272c8d39ff2d1460bd952c7228c4c98536ca6a554c44","0x4e99a30e99712c8c6e292fe7ba6b27a37c7ced12e2ec7862f31fb676724cb404","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4df57e"]}
17580:04:05:30.096: main Eth speed: 28.617 MH/s, shares: 284/0/0, time: 5:17
17580:04:05:30.096: main GPUs: 1: 0.000 MH/s (142) 2: 28.617 MH/s (142)
17580:04:05:35.175: main Eth speed: 28.605 MH/s, shares: 284/0/0, time: 5:17
17580:04:05:35.175: main GPUs: 1: 0.000 MH/s (142) 2: 28.605 MH/s (142)
17580:04:05:36.394: main GPU1: 54C 17%, GPU2: 67C 17%
17580:04:05:39.689: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

17580:04:05:39.689: eths Eth: Send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x32eb4a9","0xdf1e1ca4401117200633d5a343be0ae9c05e3d9e630c497b76f2409afb2b402e"]}

17580:04:05:39.783: eths Eth: Received: {"id":5,"jsonrpc":"2.0","result":["0x289abbab48807a4927ff272c8d39ff2d1460bd952c7228c4c98536ca6a554c44","0x4e99a30e99712c8c6e292fe7ba6b27a37c7ced12e2ec7862f31fb676724cb404","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4df57e"]}
17580:04:05:39.876: eths Eth: Received: {"id":5,"jsonrpc":"2.0","result":["0x289abbab48807a4927ff272c8d39ff2d1460bd952c7228c4c98536ca6a554c44","0x4e99a30e99712c8c6e292fe7ba6b27a37c7ced12e2ec7862f31fb676724cb404","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4df57e"]}
17580:04:05:39.876: eths Eth: Received: {"id":6,"jsonrpc":"2.0","result":true}
17580:04:05:40.285: main Eth speed: 28.604 MH/s, shares: 284/0/0, time: 5:17
17580:04:05:40.285: main GPUs: 1: 0.000 MH/s (142) 2: 28.604 MH/s (142)
17580:04:05:45.364: main Eth speed: 28.601 MH/s, shares: 284/0/0, time: 5:17
17580:04:05:45.364: main GPUs: 1: 0.000 MH/s (142) 2: 28.601 MH/s (142)
17580:04:05:49.690: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

17580:04:05:49.783: eths Eth: Received: {"id":5,"jsonrpc":"2.0","result":["0x289abbab48807a4927ff272c8d39ff2d1460bd952c7228c4c98536ca6a554c44","0x4e99a30e99712c8c6e292fe7ba6b27a37c7ced12e2ec7862f31fb676724cb404","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4df57e"]}
17580:04:05:50.442: main Eth speed: 28.606 MH/s, shares: 284/0/0, time: 5:17
17580:04:05:50.442: main GPUs: 1: 0.000 MH/s (142) 2: 28.606 MH/s (142)
17580:04:05:54.128: wdog GPU1 not responding
17580:04:05:54.128: wdog Thread(s) not responding. Restarting.
17580:04:05:55.552: main Eth speed: 28.604 MH/s, shares: 284/0/0, time: 5:17
17580:04:05:55.552: main GPUs: 1: 0.000 MH/s (142) 2: 28.604 MH/s (142)

Please check your command-line options: if you have -rmode 2 (or -r 1), remove it as it forces the miner to try and run the reboot.bat file in the same folder as the miner instead of just restarting the PhoenixMiner.exe with the same options. As for the reason for freezing of GPU1, it is either too high clocks or too low voltage (or combination of both). Please note the the current version of PhoenixMiner doesn't support the hardware control options (-cvddc, -mvddc, etc.). They will be added in the upcoming 2.7b and for now you have to rely on third-party program for controlling the clocks and voltages of the GPUs.

That worked. However, after auto restarting PhoenixMiner.exe, one of my GPU's OC gets removed. I think I will wait for the version that supports Overclocking.

axe0911

Posts

Merits