Quote from: QuintLeo on November 26, 2017, 08:55:44 PM

Memory DOES make a difference on equihash - though not a big one on the 1080 ti.

On my Aorus (not the extreme), I found that +100 core +100 memory was the best setting for speed/efficiency that was stable - +150 memory gave a few more sol/s but wasn't long-term stable as those cards seem to push the memory pretty hard already, +200 memory gave me LOWER sol/s probably because it pushed the card up into the next "strap" range with higher latency settings.

50% TDP (125 watts) gave 505 hash - don't bother this is a waste of the card.
60% TDP (150 watts) gave 620 hash - this seems to be the best efficiency point that still has decent hashrate.
70% TDP (175 watts) gave 680 hash - efficiency dropping but not a LOT yet
80% TDP (200 watts) gave 725 hash - efficiency dropoff getting noticeable
90% TDP (225 watts) gave 760 hash - ditto
100% TDP (250 watts) gave 780 hash - waste of power unless you have VERY VERY cheap power, and even then it's a bit iffy - though the cards still runs pretty cool at this setting as long as it's NOT in a hot room.

Other cards may vary, though all of the cards I have to date (1 Gigabyte Windforce, 1 EVGA SC, pair of Aorus) all seem to match nearly identically up to about the 80% point, then the EVGA and Windforce start dropping a bit as temp doesn't let them boost the core as much.

Which miner are you using?
I'm getting 735 sol/s @ 90% TDP (225 watts).
Aorus (non-extreme. N108TAORUS) and Zotac (AMP Edition ZT-P10810D-10P)
+100 core, +100 memory.
Ubuntu with dstm miner.

VicTwenty

Posts

Merits