Quote from: wilkbtc on January 03, 2019, 08:23:20 PM

Hello .. the braiin os is cool but the problem i run into is: when i am at my mini farm 30 miners i get API connection stalled and then cant connect to miner ...

i mean i can still go mess with the other settings and pool side i am connected but it is very annoying because i cannot monitor the overclock settings so it makes it very hard to fine tune the miners

However when i bring 1 machine home and test run it there everything works very well and miners run optimal ....

anyone else got that issue ? ...

feels like it has something to do with my switch but all my miners that are not on brain os dont have that issue

Make sure you're able to use unsecured port 80. That's what's uhttp is looking for access to. My one computer won't allow me to port forward from off network due to some security issues. Idk, I just made an exception in the tcp forwards to allow all connections to that ip. Idk what it was but try to allow all connections to 443,4028,80,8080

See what works

Quote from: philipma1957 on January 04, 2019, 12:26:59 AM

952 watts doing 10500 set at freq 500 and 8.7 v

I can do 90 watts a th with bitmain firmware.

at the moment this is doing 90 watts a th.

I will play with it. to see if I go to 85 watts a

1002 watts doing 11050 set at freq and 8.7volt

which is 90 watts a th.

The new bitmain firmware sets your boards to (roughly) 450 frequency and 8.3 volts. So, I'd assume you could do 500 at 8.3 or 8.4 and get better watt/TH

Shad0wSmurf

Posts

Merits