Quote from: nwoolls on December 03, 2014, 06:17:19 AM

Make sure you have the correct OS drivers installed:
https://github.com/nwoolls/MultiMiner/wiki/Drivers#silicon-labs-usb-to-uart-driver

Then use the Scan Hardware menu item.

Can't attach screen shots but Device Mgr shows:
Silicon Labs CP210x USB to UART Bridge (COM14)
Driver Date: 03/19/2014
Driver Version: 6.7.0.0

Quote from: nwoolls on December 03, 2014, 06:17:19 AM

If the ZeusMiner still doesn't show, I've heard reports that their newer hardware requires a lower frequency. You can specify that in MultiMiner in the settings here using the following SHA256 arguments:

Code:

--set zus:clock=248

But the ZeusMiner Thunder X6 is scrypt ASIC not SHA256 right? Still need to put that in?

Quote from: nwoolls on December 03, 2014, 06:17:19 AM

The arguments may also be needed in the Hardware scan field on the same screen.

Thought that may be so I had already added -S zus:all which I found referenced on another thread somewhere.

Quote from: nwoolls on December 03, 2014, 06:17:19 AM

Quote from: ShosMeister on December 03, 2014, 01:31:40 AM

Also, for some reason, my rockminor r-box has dissappeared Sad

Make sure you have the correct drivers installed and / or try reinstalling them (same driver as above).

Tried that and the scan hardware doesn't show it up. Was mostly asking in case anyone knew how to verify it was actually connected to the machine or did it die/have a bad cable - already tried a new cable and multiple ports Sad

Thanks!

ShosMeister

Posts

Merits