Can someone help me understand what is going on with my Antminer S9? I copy and pasted the kernal log below.

[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc:

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000]    Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000]    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000308] ps7-ttc #0 at df804000, irq=43
[ 0.000617] Console: colour dummy device 80x30
[ 0.000648] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040208] pid_max: default: 32768 minimum: 301
[ 0.040425] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040445] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.042580] CPU: Testing write buffer coherency: ok
[ 0.042917] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.042977] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[ 0.043202] L310 cache controller enabled
[ 0.043222] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.121033] CPU1: Booted secondary processor
[ 0.210227] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210358] Brought up 2 CPUs
[ 0.210377] SMP: Total of 2 processors activated.
[ 0.210386] CPU: All CPU(s) started in SVC mode.
[ 0.211047] devtmpfs: initialized
[ 0.213462] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214673] regulator-dummy: no parameters
[ 0.222343] NET: Registered protocol family 16
[ 0.224627] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.226913] cpuidle: using governor ladder
[ 0.226926] cpuidle: using governor menu
[ 0.234350] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.235872] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.235886] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.236001] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.257825] bio: create slab <bio-0> at 0
[ 0.259254] vgaarb: loaded
[ 0.259965] SCSI subsystem initialized
[ 0.260999] usbcore: registered new interface driver usbfs
[ 0.261831] usbcore: registered new interface driver hub
[ 0.262073] usbcore: registered new device driver usb
[ 0.262602] media: Linux media interface: v0.10
[ 0.262759] Linux video capture interface: v2.00
[ 0.262999] pps_core: LinuxPPS API ver. 1 registered
[ 0.263011] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.263133] PTP clock support registered
[ 0.263494] EDAC MC: Ver: 3.0.0
[ 0.264532] Advanced Linux Sound Architecture Driver Initialized.
[ 0.267358] DMA-API: preallocated 4096 debug entries
[ 0.267372] DMA-API: debugging enabled by kernel config
[ 0.267445] Switched to clocksource arm_global_timer
[ 0.288011] NET: Registered protocol family 2
[ 0.288666] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.288723] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.288808] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.288858] TCP: reno registered
[ 0.288876] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.288908] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.289138] NET: Registered protocol family 1
[ 0.289490] RPC: Registered named UNIX socket transport module.
[ 0.289503] RPC: Registered udp transport module.
[ 0.289512] RPC: Registered tcp transport module.
[ 0.289520] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.289534] PCI: CLS 0 bytes, default 64
[ 0.289973] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.292003] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.294091] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.294292] msgmni has been set to 967
[ 0.295074] io scheduler noop registered
[ 0.295087] io scheduler deadline registered
[ 0.295123] io scheduler cfq registered (default)
[ 0.307721] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.307742] dma-pl330 f8003000.ps7-dma:    DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.431163] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 0.999088] console [ttyPS0] enabled
[ 1.003365] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.010989] [drm] Initialized drm 1.1.0 20060810
[ 1.027967] brd: module loaded
[ 1.037283] loop: module loaded
[ 1.046730] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.052556] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.060525] libphy: XEMACPS mii bus: probed
[ 1.064893] ------------- phy_id = 0x3625e62
[ 1.069856] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.078459] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.085075] ehci-pci: EHCI PCI platform driver
[ 1.092346] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.099183] usbcore: registered new interface driver usb-storage
[ 1.106016] mousedev: PS/2 mouse device common for all mice
[ 1.112150] i2c /dev entries driver
[ 1.119119] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.124604] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.130534] Xilinx Zynq CpuIdle Driver started
[ 1.135375] sdhci: Secure Digital Host Controller Interface driver
[ 1.141524] sdhci: Copyright(c) Pierre Ossman
[ 1.145806] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.152632] mmc0: no vqmmc regulator found
[ 1.156642] mmc0: no vmmc regulator found
[ 1.197465] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.206159] usbcore: registered new interface driver usbhid
[ 1.211667] usbhid: USB HID core driver
[ 1.216382] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.222683] nand: Micron MT29F2G08ABAEAWP
[ 1.226646] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.232582] Bad block table found at page 131008, version 0x01
[ 1.238805] Bad block table found at page 130944, version 0x01
[ 1.244856] 3 ofpart partitions found on MTD device pl353-nand
[ 1.250637] Creating 3 MTD partitions on "pl353-nand":
[ 1.255728] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.263770] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.271149] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.280092] TCP: cubic registered
[ 1.283327] NET: Registered protocol family 17
[ 1.288037] Registering SWP/SWPB emulation handler
[ 1.293913] regulator-dummy: disabling
[ 1.298282] UBI: attaching mtd1 to ubi0
[ 1.824480] UBI: scanning is finished
[ 1.836038] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.843116] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.849879] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.856544] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.863421] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.869402] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.876510] UBI: max/mean erase counter: 52/24, WL threshold: 4096, image sequence number: 1283732989
[ 1.885725] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.894941] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.894947] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.898902] ALSA device list:
[ 1.898906] No soundcards found.
[ 1.915294] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.975346] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 1.981305] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 1.990408] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.000293] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.005322] UBIFS: media format: w4/r0 (latest is w4/r0), UUID C72F8006-6DFF-46BA-BBE9-380960A89F92, small LPT model
[ 2.016845] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.024307] devtmpfs: mounted
[ 2.027410] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 2.864115] random: dd urandom read with 0 bits of entropy available
[ 3.257493]
[ 3.257493] bcm54xx_config_init
[ 3.867492]
[ 3.867492] bcm54xx_config_init
[ 7.868322] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 7.874428] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 22.429478] In axi fpga driver!
[ 22.432551] request_mem_region OK!
[ 22.435941] AXI fpga dev virtual address is 0xdf9fc000
[ 22.441083] *base_vir_addr = 0x8c510
[ 22.456564] In fpga mem driver!
[ 22.459689] request_mem_region OK!
[ 22.463196] fpga mem virtual address is 0xe2000000
[ 23.256772]
[ 23.256772] bcm54xx_config_init
[ 23.886672]
[ 23.886672] bcm54xx_config_init
[ 27.887027] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 27.893133] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
This is XILINX board. Totalram: 507527168
Detect 512MB control board of XILINX
DETECT HW version=0008c510
miner ID : 8058f5c67680881c
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[1] has core num=1
Chain[5] ASIC[4] has core num=1
Chain[5] ASIC[17] has core num=15
Chain[5] ASIC[19] has core num=1
Chain[5] ASIC[46] has core num=1
Chain[5] ASIC[51] has core num=15
Chain[5] ASIC[59] has core num=1
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[32] has core num=15
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Check chain[7] PIC fw version=0x03
get PIC voltage=6 on chain[5], value=940
get PIC voltage=6 on chain[6], value=940
get PIC voltage=6 on chain[7], value=940
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL

--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1964 root 0:00 grep bmminer

bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Fri Nov 17 17:37:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 8058f5c67680881c
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[5] speed=4560
get fan[2] speed=6120
get fan[5] speed=4560
get fan[2] speed=6120
get fan[5] speed=4560
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has backup chain_voltage=870
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has backup chain_voltage=870
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has backup chain_voltage=890
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=6 value=940
Chain[J6] will use backup chain_voltage_pic=870 [125]
Chain[J6] get working chain_voltage_pic=125
Chain[J7] orignal chain_voltage_pic=6 value=940
Chain[J7] will use backup chain_voltage_pic=870 [125]
Chain[J7] get working chain_voltage_pic=125
Chain[J8] orignal chain_voltage_pic=6 value=940
Chain[J8] will use backup chain_voltage_pic=890 [91]
Chain[J8] get working chain_voltage_pic=91
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 57 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 57 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 57 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 57 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 57 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 55 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 57 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[1] has core num=1
Chain[J6] ASIC[4] has core num=1
Chain[J6] ASIC[17] has core num=15
Chain[J6] ASIC[19] has core num=1
Chain[J6] ASIC[46] has core num=1
Chain[J6] ASIC[51] has core num=15
Chain[J6] ASIC[59] has core num=1
Chain[J7] has core num in PIC
Chain[J7] ASIC[32] has core num=15
Chain[J8] has core num in PIC
miner total rate=13901GH/s fixed rate=13500GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=675
Asic[ 0]:675
Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675 Asic[ 8]:675
Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675 Asic[16]:675
Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675 Asic[24]:675
Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675 Asic[32]:675
Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675 Asic[40]:675
Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675 Asic[48]:675
Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675 Asic[56]:675
Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675
Chain:5 max freq=675
Chain:5 min freq=675

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=662
Asic[ 0]:662
Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 Asic[ 8]:662
Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 Asic[16]:662
Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 Asic[24]:662
Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 Asic[32]:662
Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 Asic[40]:662
Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 Asic[48]:662
Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 Asic[56]:662
Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:6 max freq=662
Chain:6 min freq=662

read PIC voltage=940 on chain[7]
Chain:7 chipnum=57
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631

Chain:7 max freq=631
Chain:7 min freq=631

Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=675
Asic[ 0]:675
Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675 Asic[ 8]:675
Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675 Asic[16]:675
Detect a bad chip=17 on chain[5], fixed to 400M
Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675 Asic[24]:675
Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675 Asic[32]:675
Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675 Asic[40]:675
Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675 Asic[48]:675
Asic[49]:675 Asic[50]:675 Detect a bad chip=51 on chain[5], fixed to 400M
Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675 Asic[56]:675
Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675
Chain:5 max freq=675
Chain:5 min freq=675

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=662
Asic[ 0]:662
Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 Asic[ 8]:662
Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 Asic[16]:662
Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 Asic[24]:662
Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 Detect a bad chip=32 on chain[6], fixed to 400M
Asic[32]:662
Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 Asic[40]:662
Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 Asic[48]:662
Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 Asic[56]:662
Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:6 max freq=662
Chain:6 min freq=662

read PIC voltage=940 on chain[7]
Chain:7 chipnum=57
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631

Chain:7 max freq=631
Chain:7 min freq=631

max freq = 675
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=00
Warning: Chain[J6] has no temp offset in PIC! will fix it
Chain[J6] use default temp chip[244]
Chain[J6] try read temp chip[244] ID=00 (I2C addr=0x98)
Chain[J6] try read temp chip[244] ID=00 (I2C addr=0x9A)
Chain[J6] try read temp chip[244] ID=00 (I2C addr=0x9C)
Warning: Chain[5] chip[244] local:-64 remote:0 offset:-42, will fixed offset=27
New offset Chain[5] chip[244] local:-64 remote:0 offset:27
Chain[J6] chip[244] get middle temp offset=27 typeID=00
Chain[J7] PIC temp offset=62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=00
Warning: Chain[J7] has no temp offset in PIC! will fix it
Chain[J7] use default temp chip[244]
Chain[J7] try read temp chip[244] ID=00 (I2C addr=0x98)
Chain[J7] try read temp chip[244] ID=00 (I2C addr=0x9A)
Chain[J7] try read temp chip[244] ID=00 (I2C addr=0x9C)
Warning: Chain[6] chip[244] local:-64 remote:0 offset:-42, will fixed offset=27
New offset Chain[6] chip[244] local:-64 remote:0 offset:27
Chain[J7] chip[244] get middle temp offset=27 typeID=00
single board rate=4690 voltage limit=870 on chain[5]
get PIC voltage=870 on chain[5], check: must be < 870
retryFlag=1 will set the voltage limited on chain[5], change voltage=870
now set pic voltage=125 on chain[5]
single board rate=4679 voltage limit=870 on chain[6]
get PIC voltage=870 on chain[6], check: must be < 870
retryFlag=1 will set the voltage limited on chain[6], change voltage=870
now set pic voltage=125 on chain[6]
single board rate=4531 voltage limit=890 on chain[7]
get PIC voltage=890 on chain[7], check: must be < 890
retryFlag=1 will set the voltage limited on chain[7], change voltage=890
now set pic voltage=91 on chain[7]
Chain[J6] set working voltage=870 [125]
Chain[J7] set working voltage=870 [125]
Chain[J8] set working voltage=890 [91]
do heat board 8xPatten for 1 times
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
do read_temp_func once...
do check_asic_reg 0x08
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=00 middle offset=27
read failed, old value: Chain[5] Chip[62] local Temp=0
read failed on Chain[5] Chip[62] middle Temp old value:15
Special fix Chain[5] Chip[62] middle Temp = 15
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=00 middle offset=27
read failed, old value: Chain[6] Chip[62] local Temp=0
read failed on Chain[6] Chip[62] middle Temp old value:15
Special fix Chain[6] Chip[62] middle Temp = 15
Done read temp on Chain[6]
do read temp on Chain[7]
Done read temp on Chain[7]
Set fixed full fan speed
FAN PWM: 100
read_temp_func Done!
CRC error counter=12487

rydog89

Posts

Merits