Quote from: relax69 on Today at 07:22:36 AM

I have problems with my Big Navi cards in Windows 10 21H1 too, but it looks strange to me. On my test PC, I have a single RX 6600 which is working without any issues with the same windows and same drivers. The only difference is my test PC runs with Windows Home, but the rig runs with Windows Pro. When I start the rig, without setting clKernel or I set it to 1, it returns me Failed to compile program: clBuildProgram (-11) before the DAG generation, and message after the DAG is:

Code:

2021.11.10:21:17:37.400: GPU7 GPU7: DAG generated in 6.0 s (772.9 MB/s)
2021.11.10:21:17:37.402: GPU7 GPU7: Unable to prepare kernels: clCreateKernel (-46)
2021.11.10:21:17:37.402: wdog Fatal error detected. Restarting.

Please see the full log file for more information:

When I start the rig with -clKernel 0 for the last four cards, it works, but I am getting too high percents of stale and incorrect shares. Also, it is strange because the GPU6 is not Big Navi, but RX 5500 XT. In addition to stale shares reported by the miner, I am getting between 2 and 4% stale shares reported by the pool. The pool reports less than 1% for my other rigs. Please see a short report for this here:

Another problem I started to see sometimes since I use PM5.8c is two of my RX 5700s with Samsung memory report times higher hashrate than normal, while they are not hashing 2: 8617333.868 MH/s (7), but the watchdog does not restart the rig. The other 2 RX 5700s with Micron memory do not have this issue.

Code:

2021.11.09:13:25:53.473: main GPUs: 0: 51.796 MH/s (151) 1: 53.417 MH/s (165) 2: 8617333.868 MH/s (7) 3: 53.515 MH/s (150) 4: 53.476 MH/s (148) 5: 32.438 MH/s (108) 6: 26.736 MH/s (84) 7: 47.511 MH/s (140/1) 8: 47.505 MH/s (135)

Yes. It’s very strange

I tried to install HiveOS on rig. Install the drivers A20.40 (5.11.1001) launch phoeinxminer 5.8c and first I have error clBuildProgram (-11) and immediately after clCreateKernel (-46)

Vvpgoat

Posts

Merits