Quote from: robertpaulsen on October 16, 2021, 01:19:58 PM

I have an issue with my T17, one just 1 hashboard. Sometimes i get 0 asic found sometimes it finds all 30. But in any case, I get the error for all temp sensors on the board. I think I've went through most of the posts here and it most likely resembles the issue I quoted below. As I could see, most likely its loose heatsink, but after my (inexperienced) inspection, none seems loose when tested with mild pressure. Can anyone point me to some diy fix (I have only solder, no heatgun) or just take it to the repair shop? Here are the logs:

When finding all asics:

Code:

2021-10-14 17:42:05 driver-btm-api.c:631:init_freq_mode: This is scan-user version
2021-10-14 17:42:05 driver-btm-api.c:1994:bitmain_soc_init: opt_multi_version = 1
2021-10-14 17:42:05 driver-btm-api.c:1995:bitmain_soc_init: opt_bitmain_ab = 1
2021-10-14 17:42:05 driver-btm-api.c:1996:bitmain_soc_init: opt_bitmain_work_mode = 0
2021-10-14 17:42:05 driver-btm-api.c:1997:bitmain_soc_init: Miner compile time: Tue Dec 24 16:13:07 CST 2019 type: Antminer T17
2021-10-14 17:42:05 driver-btm-api.c:1998:bitmain_soc_init: commit version: e93a09b 2019-12-24 16:03:45, build by: lol 2019-12-24 16:19:49
2021-10-14 17:42:05 driver-btm-api.c:1810:show_sn: no SN got, please write SN to /nvdata/sn
2021-10-14 17:42:05 driver-btm-api.c:1135:miner_device_init: Detect 256MB control board of XILINX
2021-10-14 17:42:05 driver-btm-api.c:1083:init_fan_parameter: fan_eft : 0 fan_pwm : 0
2021-10-14 17:42:05 thread.c:789:create_read_nonce_reg_thread: create thread
2021-10-14 17:42:11 driver-btm-api.c:1067:init_miner_version: miner ID : 803c95042b104814
2021-10-14 17:42:11 driver-btm-api.c:1073:init_miner_version: FPGA Version = 0xB013
2021-10-14 17:42:13 eeprom.c:431:check_pattern_test_level: L1 board
2021-10-14 17:42:15 eeprom.c:431:check_pattern_test_level: L1 board
2021-10-14 17:42:16 eeprom.c:431:check_pattern_test_level: L1 board
2021-10-14 17:42:16 driver-btm-api.c:705:get_product_id: product_id[0] = 1
2021-10-14 17:42:16 driver-btm-api.c:705:get_product_id: product_id[1] = 1
2021-10-14 17:42:16 driver-btm-api.c:705:get_product_id: product_id[2] = 1
2021-10-14 17:42:16 driver-btm-api.c:1633:get_ccdly_opt: ccdly_opt[0] = 1
2021-10-14 17:42:16 driver-btm-api.c:1633:get_ccdly_opt: ccdly_opt[1] = 1
2021-10-14 17:42:16 driver-btm-api.c:1633:get_ccdly_opt: ccdly_opt[2] = 1
2021-10-14 17:42:16 driver-btm-api.c:1877:bitmain_board_init: g_ccdly_opt = 1
2021-10-14 17:42:16 driver-btm-api.c:644:_set_project_type: project:2
2021-10-14 17:42:17 driver-btm-api.c:674:_set_project_type: Project type: Antminer T17
2021-10-14 17:42:17 driver-btm-api.c:685:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100
2021-10-14 17:42:17 driver-btm-api.c:686:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
2021-10-14 17:42:17 driver-btm-api.c:685:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
2021-10-14 17:42:17 driver-btm-api.c:686:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
2021-10-14 17:42:17 driver-btm-api.c:685:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100
2021-10-14 17:42:17 driver-btm-api.c:686:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
2021-10-14 17:42:18 driver-btm-api.c:1897:bitmain_board_init: Fan check passed.
2021-10-14 17:42:19 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2021-10-14 17:42:23 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0xb9
2021-10-14 17:42:24 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2021-10-14 17:42:28 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9
2021-10-14 17:42:30 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2021-10-14 17:42:33 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9
2021-10-14 17:42:33 thread.c:784:create_pic_heart_beat_thread: create thread
2021-10-14 17:42:33 power_api.c:55:power_init: power init ...
2021-10-14 17:42:33 driver-btm-api.c:1907:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2021-10-14 17:43:05 power_api.c:232:set_iic_power_to_highest_voltage: setting to voltage: 17.00 ...
2021-10-14 17:43:11 power_api.c:124:check_voltage_multi: retry time: 0
2021-10-14 17:43:13 power_api.c:86:get_average_voltage: chain[0], voltage is: 17.677236
2021-10-14 17:43:14 power_api.c:86:get_average_voltage: chain[1], voltage is: 17.120039
2021-10-14 17:43:16 power_api.c:86:get_average_voltage: chain[2], voltage is: 16.917978
2021-10-14 17:43:16 power_api.c:97:get_average_voltage: aveage voltage is: 17.238418
2021-10-14 17:43:16 power_api.c:182:set_iic_power_by_voltage: now set voltage to : 17.000000
2021-10-14 17:43:16 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[0]: chip baud = 115200, chip_divider = 26
2021-10-14 17:43:16 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[1]: chip baud = 115200, chip_divider = 26
2021-10-14 17:43:16 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[2]: chip baud = 115200, chip_divider = 26
2021-10-14 17:43:16 uart.c:80:set_baud: set fpga_baud = 115200, fpga_divider = 26
2021-10-14 17:43:28 driver-btm-api.c:1010:check_asic_number_with_power_on: Chain[0]: find 30 asic, times 0
2021-10-14 17:43:38 driver-btm-api.c:1010:check_asic_number_with_power_on: Chain[1]: find 30 asic, times 0
2021-10-14 17:43:48 driver-btm-api.c:1010:check_asic_number_with_power_on: Chain[2]: find 30 asic, times 0
2021-10-14 17:43:51 driver-btm-api.c:348:set_order_clock: chain[0]: set order clock, stragegy 3 clock_en=0x1
2021-10-14 17:43:51 driver-btm-api.c:348:set_order_clock: chain[1]: set order clock, stragegy 3 clock_en=0x1
2021-10-14 17:43:52 driver-btm-api.c:348:set_order_clock: chain[2]: set order clock, stragegy 3 clock_en=0x1
2021-10-14 17:43:52 driver-hash-chip.c:490:set_clock_delay_control: core_data = 0xb4
2021-10-14 17:43:52 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[0]: chip baud = 3000000, chip_divider = 0
2021-10-14 17:43:52 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[1]: chip baud = 3000000, chip_divider = 0
2021-10-14 17:43:52 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[2]: chip baud = 3000000, chip_divider = 0
2021-10-14 17:43:52 uart.c:80:set_baud: set fpga_baud = 3000000, fpga_divider = 0
2021-10-14 17:43:52 driver-btm-api.c:1660:check_clock_counter: freq 50 clock_counter_limit 6
2021-10-14 17:43:53 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[0]: chip baud = 115200, chip_divider = 26
2021-10-14 17:43:53 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[1]: chip baud = 115200, chip_divider = 26
2021-10-14 17:43:53 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[2]: chip baud = 115200, chip_divider = 26
2021-10-14 17:43:53 uart.c:80:set_baud: set fpga_baud = 115200, fpga_divider = 26
2021-10-14 17:43:53 voltage[0] = 1690
2021-10-14 17:43:53 voltage[1] = 1690
2021-10-14 17:43:53 voltage[2] = 1690
2021-10-14 17:43:53 power_api.c:140:set_working_voltage: working_voltage = 16.900000
2021-10-14 17:43:54 temperature.c:282:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 0 success.
2021-10-14 17:43:55 temperature.c:282:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 1 success.
2021-10-14 17:43:57 temperature.c:282:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 2 success.
2021-10-14 17:43:57 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[0]: chip baud = 6000000, chip_divider = 7
2021-10-14 17:43:57 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[1]: chip baud = 6000000, chip_divider = 7
2021-10-14 17:43:57 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[2]: chip baud = 6000000, chip_divider = 7
2021-10-14 17:43:57 uart.c:80:set_baud: set fpga_baud = 6000000, fpga_divider = 3
2021-10-14 17:43:59 driver-btm-api.c:248:check_bringup_temp: Bring up temperature is 21
2021-10-14 17:43:59 thread.c:804:create_check_miner_status_thread: create thread
2021-10-14 17:43:59 thread.c:794:create_set_miner_status_thread: create thread
2021-10-14 17:43:59 driver-btm-api.c:581:calculate_timeout: dev->timeout = 392
2021-10-14 17:43:59 thread.c:779:create_temperature_monitor_thread: create thread
2021-10-14 17:43:59 freq_tuning.c:154:freq_tuning_get_max_freq: Max freq of tuning is 760
2021-10-14 17:43:59 power_api.c:379:slowly_set_iic_power_to_custom_voltage: slowly setting to voltage: 17.80 ...
2021-10-14 17:44:33 power_api.c:124:check_voltage_multi: retry time: 0
2021-10-14 17:44:35 power_api.c:86:get_average_voltage: chain[0], voltage is: 17.781328
2021-10-14 17:44:37 power_api.c:86:get_average_voltage: chain[1], voltage is: 17.769082
2021-10-14 17:44:39 power_api.c:86:get_average_voltage: chain[2], voltage is: 17.744590
2021-10-14 17:44:39 power_api.c:97:get_average_voltage: aveage voltage is: 17.765000
2021-10-14 17:44:39 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 44 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 7, usr divider: 1
2021-10-14 17:44:39 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 51 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 6, usr divider: 1
2021-10-14 17:44:39 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 61 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 5, usr divider: 1
2021-10-14 17:44:39 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 77 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 4, usr divider: 1
2021-10-14 17:44:39 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 102 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 3, usr divider: 1
2021-10-14 17:44:39 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 154 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 2, usr divider: 1
2021-10-14 17:44:39 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 308 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 1, usr divider: 1
2021-10-14 17:44:39 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 360 set refdiv: 2, fbdiv: 173, postdiv1: 6, postdiv2: 1, usr divider: 1
2021-10-14 17:44:40 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 432 set refdiv: 2, fbdiv: 173, postdiv1: 5, postdiv2: 1, usr divider: 1
2021-10-14 17:44:40 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 540 set refdiv: 2, fbdiv: 173, postdiv1: 4, postdiv2: 1, usr divider: 1
2021-10-14 17:44:40 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 720 set refdiv: 2, fbdiv: 173, postdiv1: 3, postdiv2: 1, usr divider: 1
2021-10-14 17:44:40 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 44 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 7, usr divider: 1
2021-10-14 17:44:40 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 51 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 6, usr divider: 1
2021-10-14 17:44:40 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 61 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 5, usr divider: 1
2021-10-14 17:44:40 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 77 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 4, usr divider: 1
2021-10-14 17:44:40 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 102 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 3, usr divider: 1
2021-10-14 17:44:40 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 154 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 2, usr divider: 1
2021-10-14 17:44:41 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 308 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 1, usr divider: 1
2021-10-14 17:44:41 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 360 set refdiv: 2, fbdiv: 173, postdiv1: 6, postdiv2: 1, usr divider: 1
2021-10-14 17:44:41 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 432 set refdiv: 2, fbdiv: 173, postdiv1: 5, postdiv2: 1, usr divider: 1
2021-10-14 17:44:41 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 540 set refdiv: 2, fbdiv: 173, postdiv1: 4, postdiv2: 1, usr divider: 1
2021-10-14 17:44:41 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 720 set refdiv: 2, fbdiv: 173, postdiv1: 3, postdiv2: 1, usr divider: 1
2021-10-14 17:44:41 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 44 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 7, usr divider: 1
2021-10-14 17:44:41 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 51 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 6, usr divider: 1
2021-10-14 17:44:41 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 61 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 5, usr divider: 1
2021-10-14 17:44:41 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 77 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 4, usr divider: 1
2021-10-14 17:44:41 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 102 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 3, usr divider: 1
2021-10-14 17:44:42 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 154 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 2, usr divider: 1
2021-10-14 17:44:42 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 308 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 1, usr divider: 1
2021-10-14 17:44:42 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 360 set refdiv: 2, fbdiv: 173, postdiv1: 6, postdiv2: 1, usr divider: 1
2021-10-14 17:44:42 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 432 set refdiv: 2, fbdiv: 173, postdiv1: 5, postdiv2: 1, usr divider: 1
2021-10-14 17:44:42 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 540 set refdiv: 2, fbdiv: 173, postdiv1: 4, postdiv2: 1, usr divider: 1
2021-10-14 17:44:42 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 720 set refdiv: 2, fbdiv: 173, postdiv1: 3, postdiv2: 1, usr divider: 1
2021-10-14 17:44:42 driver-btm-api.c:612:set_timeout: freq 720 final timeout=163
2021-10-14 17:44:42 power_api.c:397:slowly_set_iic_power_to_working_voltage: slowly setting to voltage: 16.90 ...
2021-10-14 17:44:48 temperature.c:697:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 64, reg = 0
2021-10-14 17:45:01 temperature.c:697:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 64, reg = 1
2021-10-14 17:45:07 temperature.c:697:get_temp_info: read temp sensor failed: chain = 0, sensor = 1, chip = 48, reg = 0
2021-10-14 17:45:17 power_api.c:124:check_voltage_multi: retry time: 0
2021-10-14 17:45:19 power_api.c:86:get_average_voltage: chain[0], voltage is: 16.783271
2021-10-14 17:45:20 temperature.c:697:get_temp_info: read temp sensor failed: chain = 0, sensor = 1, chip = 48, reg = 1
2021-10-14 17:45:21 power_api.c:86:get_average_voltage: chain[1], voltage is: 16.771025
2021-10-14 17:45:22 power_api.c:86:get_average_voltage: chain[2], voltage is: 16.979209
2021-10-14 17:45:22 power_api.c:97:get_average_voltage: aveage voltage is: 16.844502
2021-10-14 17:45:22 frequency.c:540:get_current_min_freq: current min freq 720
2021-10-14 17:45:22 driver-btm-api.c:1660:check_clock_counter: freq 720 clock_counter_limit 92
2021-10-14 17:45:27 temperature.c:697:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 168, reg = 0
2021-10-14 17:45:40 temperature.c:697:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 168, reg = 1
2021-10-14 17:45:47 temperature.c:697:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 184, reg = 0
2021-10-14 17:46:00 temperature.c:697:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 184, reg = 1
2021-10-14 17:46:04 register.c:1416:quick_dump_core_hash_clock_counter: bad clock counter. chain = 0, asic = 5, core = 0, found 0, clock counter 0x00000000
2021-10-14 17:46:04 driver-btm-api.c:2097:bitmain_soc_init: clock count check failed after retry, wait for hash rate protect later.
2021-10-14 17:46:04 thread.c:799:create_check_system_status_thread: create thread
2021-10-14 17:46:04 driver-btm-api.c:2113:bitmain_soc_init: Init done!
2021-10-14 17:46:04 driver-btm-api.c:201:set_miner_status: STATUS_INIT
2021-10-14 17:46:09 driver-btm-api.c:201:set_miner_status: STATUS_OKAY
2021-10-14 17:46:10 temperature.c:697:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 64, reg = 0
2021-10-14 17:46:14 driver-btm-api.c:1293:dhash_chip_send_job: Version num 4
2021-10-14 17:46:24 temperature.c:697:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 64, reg = 1
2021-10-14 17:46:30 temperature.c:697:get_temp_info: read temp sensor failed: chain = 0, sensor = 1, chip = 48, reg = 0
2021-10-14 17:46:43 temperature.c:697:get_temp_info: read temp sensor failed: chain = 0, sensor = 1, chip = 48, reg = 1
2021-10-14 17:46:50 temperature.c:697:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 168, reg = 0
2021-10-14 17:47:03 temperature.c:697:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 168, reg = 1
2021-10-14 17:47:09 temperature.c:697:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 184, reg = 0
2021-10-14 17:47:23 temperature.c:697:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 184, reg = 1
2021-10-14 17:47:31 temperature.c:697:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 64, reg = 0
2021-10-14 17:47:44 temperature.c:697:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 64, reg = 1
2021-10-14 17:47:51 temperature.c:697:get_temp_info: read temp sensor failed: chain = 0, sensor = 1, chip = 48, reg = 0
2021-10-14 17:48:04 temperature.c:697:get_temp_info: read temp sensor failed: chain = 0, sensor = 1, chip = 48, reg = 1
2021-10-14 17:48:11 temperature.c:697:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 168, reg = 0
2021-10-14 17:48:24 temperature.c:697:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 168, reg = 1
2021-10-14 17:48:30 temperature.c:697:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 184, reg = 0
2021-10-14 17:48:43 temperature.c:697:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 184, reg = 1
2021-10-14 17:48:52 temperature.c:697:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 64, reg = 0
2021-10-14 17:49:05 temperature.c:697:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 64, reg = 1
2021-10-14 17:49:12 temperature.c:697:get_temp_info: read temp sensor failed: chain = 0, sensor = 1, chip = 48, reg = 0
2021-10-14 17:49:25 temperature.c:697:get_temp_info: read temp sensor failed: chain = 0, sensor = 1, chip = 48, reg = 1
2021-10-14 17:49:31 temperature.c:697:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 168, reg = 0
2021-10-14 17:49:44 temperature.c:697:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 168, reg = 1
2021-10-14 17:49:51 temperature.c:697:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 184, reg = 0
2021-10-14 17:50:04 temperature.c:697:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 184, reg = 1
2021-10-14 17:50:13 temperature.c:697:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 64, reg = 0
2021-10-14 17:50:26 temperature.c:697:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 64, reg = 1
2021-10-14 17:50:32 temperature.c:697:get_temp_info: read temp sensor failed: chain = 0, sensor = 1, chip = 48, reg = 0
2021-10-14 17:50:46 temperature.c:697:get_temp_info: read temp sensor failed: chain = 0, sensor = 1, chip = 48, reg = 1
2021-10-14 17:50:52 temperature.c:697:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 168, reg = 0
2021-10-14 17:51:05 temperature.c:697:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 168, reg = 1
2021-10-14 17:51:12 temperature.c:697:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 184, reg = 0
2021-10-14 17:51:13 thread.c:422:is_zero_nonce_happened: chain_nonce[0] = 0
2021-10-14 17:51:13 thread.c:422:is_zero_nonce_happened: chain_nonce[1] = 15697
2021-10-14 17:51:13 thread.c:422:is_zero_nonce_happened: chain_nonce[2] = 15686
2021-10-14 17:51:13 thread.c:539:check_system_work_thread: 0 nonce rate happened after retry, wait for hash rate protect later.
2021-10-14 17:51:25 temperature.c:697:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 184, reg = 1
2021-10-14 17:51:33 temperature.c:697:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 64, reg = 0

When no asics found on board 1:

Code:

2021-10-14 17:24:48 driver-btm-api.c:631:init_freq_mode: This is scan-user version
2021-10-14 17:24:48 driver-btm-api.c:1994:bitmain_soc_init: opt_multi_version = 1
2021-10-14 17:24:48 driver-btm-api.c:1995:bitmain_soc_init: opt_bitmain_ab = 1
2021-10-14 17:24:48 driver-btm-api.c:1996:bitmain_soc_init: opt_bitmain_work_mode = 0
2021-10-14 17:24:48 driver-btm-api.c:1997:bitmain_soc_init: Miner compile time: Tue Dec 24 16:13:07 CST 2019 type: Antminer T17
2021-10-14 17:24:48 driver-btm-api.c:1998:bitmain_soc_init: commit version: e93a09b 2019-12-24 16:03:45, build by: lol 2019-12-24 16:19:49
2021-10-14 17:24:48 driver-btm-api.c:1810:show_sn: no SN got, please write SN to /nvdata/sn
2021-10-14 17:24:48 driver-btm-api.c:1135:miner_device_init: Detect 256MB control board of XILINX
2021-10-14 17:24:48 driver-btm-api.c:1083:init_fan_parameter: fan_eft : 0 fan_pwm : 0
2021-10-14 17:24:48 thread.c:789:create_read_nonce_reg_thread: create thread
2021-10-14 17:24:54 driver-btm-api.c:1067:init_miner_version: miner ID : 803c95042b104814
2021-10-14 17:24:54 driver-btm-api.c:1073:init_miner_version: FPGA Version = 0xB013
2021-10-14 17:24:56 eeprom.c:431:check_pattern_test_level: L1 board
2021-10-14 17:24:58 eeprom.c:431:check_pattern_test_level: L1 board
2021-10-14 17:24:59 eeprom.c:431:check_pattern_test_level: L1 board
2021-10-14 17:24:59 driver-btm-api.c:705:get_product_id: product_id[0] = 1
2021-10-14 17:24:59 driver-btm-api.c:705:get_product_id: product_id[1] = 1
2021-10-14 17:24:59 driver-btm-api.c:705:get_product_id: product_id[2] = 1
2021-10-14 17:24:59 driver-btm-api.c:1633:get_ccdly_opt: ccdly_opt[0] = 1
2021-10-14 17:24:59 driver-btm-api.c:1633:get_ccdly_opt: ccdly_opt[1] = 1
2021-10-14 17:24:59 driver-btm-api.c:1633:get_ccdly_opt: ccdly_opt[2] = 1
2021-10-14 17:24:59 driver-btm-api.c:1877:bitmain_board_init: g_ccdly_opt = 1
2021-10-14 17:24:59 driver-btm-api.c:644:_set_project_type: project:2
2021-10-14 17:24:59 driver-btm-api.c:674:_set_project_type: Project type: Antminer T17
2021-10-14 17:24:59 driver-btm-api.c:685:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100
2021-10-14 17:24:59 driver-btm-api.c:686:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
2021-10-14 17:24:59 driver-btm-api.c:685:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
2021-10-14 17:24:59 driver-btm-api.c:686:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
2021-10-14 17:24:59 driver-btm-api.c:685:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100
2021-10-14 17:24:59 driver-btm-api.c:686:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
2021-10-14 17:24:59 driver-btm-api.c:1897:bitmain_board_init: Fan check passed.
2021-10-14 17:25:01 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2021-10-14 17:25:05 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0xb9
2021-10-14 17:25:06 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2021-10-14 17:25:10 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9
2021-10-14 17:25:12 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2021-10-14 17:25:15 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9
2021-10-14 17:25:15 thread.c:784:create_pic_heart_beat_thread: create thread
2021-10-14 17:25:15 power_api.c:55:power_init: power init ...
2021-10-14 17:25:15 driver-btm-api.c:1907:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2021-10-14 17:25:47 power_api.c:232:set_iic_power_to_highest_voltage: setting to voltage: 17.00 ...
2021-10-14 17:25:53 power_api.c:124:check_voltage_multi: retry time: 0
2021-10-14 17:25:54 power_api.c:86:get_average_voltage: chain[0], voltage is: 17.003701
2021-10-14 17:25:56 power_api.c:86:get_average_voltage: chain[1], voltage is: 17.003701
2021-10-14 17:25:58 power_api.c:86:get_average_voltage: chain[2], voltage is: 16.966963
2021-10-14 17:25:58 power_api.c:97:get_average_voltage: aveage voltage is: 16.991455
2021-10-14 17:25:58 power_api.c:182:set_iic_power_by_voltage: now set voltage to : 17.000000
2021-10-14 17:25:58 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[0]: chip baud = 115200, chip_divider = 26
2021-10-14 17:25:58 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[1]: chip baud = 115200, chip_divider = 26
2021-10-14 17:25:58 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[2]: chip baud = 115200, chip_divider = 26
2021-10-14 17:25:58 uart.c:80:set_baud: set fpga_baud = 115200, fpga_divider = 26
2021-10-14 17:26:09 driver-btm-api.c:1010:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 0
2021-10-14 17:26:19 driver-btm-api.c:1010:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 1
2021-10-14 17:26:29 driver-btm-api.c:1010:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 2
2021-10-14 17:26:29 driver-btm-api.c:1037:check_asic_number: Chain 0 only find 0 asic, will power off hash board 0
2021-10-14 17:26:41 driver-btm-api.c:1010:check_asic_number_with_power_on: Chain[1]: find 30 asic, times 0
2021-10-14 17:26:51 driver-btm-api.c:1010:check_asic_number_with_power_on: Chain[2]: find 30 asic, times 0
2021-10-14 17:26:54 driver-btm-api.c:348:set_order_clock: chain[1]: set order clock, stragegy 3 clock_en=0x1
2021-10-14 17:26:54 driver-btm-api.c:348:set_order_clock: chain[2]: set order clock, stragegy 3 clock_en=0x1
2021-10-14 17:26:54 driver-hash-chip.c:490:set_clock_delay_control: core_data = 0xb4
2021-10-14 17:26:54 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[1]: chip baud = 3000000, chip_divider = 0
2021-10-14 17:26:54 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[2]: chip baud = 3000000, chip_divider = 0
2021-10-14 17:26:54 uart.c:80:set_baud: set fpga_baud = 3000000, fpga_divider = 0
2021-10-14 17:26:54 driver-btm-api.c:1660:check_clock_counter: freq 50 clock_counter_limit 6
2021-10-14 17:26:55 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[1]: chip baud = 115200, chip_divider = 26
2021-10-14 17:26:55 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[2]: chip baud = 115200, chip_divider = 26
2021-10-14 17:26:55 uart.c:80:set_baud: set fpga_baud = 115200, fpga_divider = 26
2021-10-14 17:26:55 voltage[1] = 1690
2021-10-14 17:26:55 voltage[2] = 1690
2021-10-14 17:26:55 power_api.c:140:set_working_voltage: working_voltage = 16.900000
2021-10-14 17:26:56 temperature.c:282:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 1 success.
2021-10-14 17:26:57 temperature.c:282:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 2 success.
2021-10-14 17:26:57 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[1]: chip baud = 6000000, chip_divider = 7
2021-10-14 17:26:57 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[2]: chip baud = 6000000, chip_divider = 7
2021-10-14 17:26:57 uart.c:80:set_baud: set fpga_baud = 6000000, fpga_divider = 3
2021-10-14 17:26:59 driver-btm-api.c:248:check_bringup_temp: Bring up temperature is 25
2021-10-14 17:26:59 thread.c:804:create_check_miner_status_thread: create thread
2021-10-14 17:26:59 thread.c:794:create_set_miner_status_thread: create thread
2021-10-14 17:26:59 driver-btm-api.c:581:calculate_timeout: dev->timeout = 392
2021-10-14 17:26:59 thread.c:779:create_temperature_monitor_thread: create thread
2021-10-14 17:26:59 freq_tuning.c:154:freq_tuning_get_max_freq: Max freq of tuning is 760
2021-10-14 17:26:59 power_api.c:379:slowly_set_iic_power_to_custom_voltage: slowly setting to voltage: 17.80 ...
2021-10-14 17:27:30 power_api.c:124:check_voltage_multi: retry time: 0
2021-10-14 17:27:33 power_api.c:86:get_average_voltage: chain[1], voltage is: 17.781328
2021-10-14 17:27:36 power_api.c:86:get_average_voltage: chain[2], voltage is: 17.769082
2021-10-14 17:27:36 power_api.c:97:get_average_voltage: aveage voltage is: 17.775205
2021-10-14 17:27:36 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 44 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 7, usr divider: 1
2021-10-14 17:27:37 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 51 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 6, usr divider: 1
2021-10-14 17:27:37 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 61 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 5, usr divider: 1
2021-10-14 17:27:37 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 77 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 4, usr divider: 1
2021-10-14 17:27:37 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 102 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 3, usr divider: 1
2021-10-14 17:27:37 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 154 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 2, usr divider: 1
2021-10-14 17:27:37 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 308 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 1, usr divider: 1
2021-10-14 17:27:37 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 360 set refdiv: 2, fbdiv: 173, postdiv1: 6, postdiv2: 1, usr divider: 1
2021-10-14 17:27:37 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 432 set refdiv: 2, fbdiv: 173, postdiv1: 5, postdiv2: 1, usr divider: 1
2021-10-14 17:27:37 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 540 set refdiv: 2, fbdiv: 173, postdiv1: 4, postdiv2: 1, usr divider: 1
2021-10-14 17:27:37 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 720 set refdiv: 2, fbdiv: 173, postdiv1: 3, postdiv2: 1, usr divider: 1
2021-10-14 17:27:38 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 44 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 7, usr divider: 1
2021-10-14 17:27:38 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 51 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 6, usr divider: 1
2021-10-14 17:27:38 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 61 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 5, usr divider: 1
2021-10-14 17:27:38 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 77 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 4, usr divider: 1
2021-10-14 17:27:38 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 102 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 3, usr divider: 1
2021-10-14 17:27:38 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 154 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 2, usr divider: 1
2021-10-14 17:27:38 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 308 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 1, usr divider: 1
2021-10-14 17:27:38 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 360 set refdiv: 2, fbdiv: 173, postdiv1: 6, postdiv2: 1, usr divider: 1
2021-10-14 17:27:38 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 432 set refdiv: 2, fbdiv: 173, postdiv1: 5, postdiv2: 1, usr divider: 1
2021-10-14 17:27:39 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 540 set refdiv: 2, fbdiv: 173, postdiv1: 4, postdiv2: 1, usr divider: 1
2021-10-14 17:27:39 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 720 set refdiv: 2, fbdiv: 173, postdiv1: 3, postdiv2: 1, usr divider: 1
2021-10-14 17:27:39 driver-btm-api.c:612:set_timeout: freq 720 final timeout=163
2021-10-14 17:27:39 power_api.c:397:slowly_set_iic_power_to_working_voltage: slowly setting to voltage: 16.90 ...
2021-10-14 17:27:58 thread.c:642:check_temperature: over max temp, pcb temp 59 (max 80), chip temp 106(max 103)
2021-10-14 17:27:58 driver-btm-api.c:201:set_miner_status: ERROR_TEMP_TOO_HIGH
2021-10-14 17:27:58 driver-btm-api.c:142:stop_mining: stop mining: over max temp
2021-10-14 17:27:58 thread.c:824:cancel_temperature_monitor_thread: cancel thread
2021-10-14 17:27:58 thread.c:834:cancel_read_nonce_reg_thread: cancel thread
2021-10-14 17:27:58 driver-btm-api.c:128:killall_hashboard: ****power off hashboard****
2021-10-14 17:28:09 power_api.c:124:check_voltage_multi: retry time: 0
2021-10-14 17:28:11 power_api.c:86:get_average_voltage: chain[1], voltage is: 16.948594
2021-10-14 17:28:13 power_api.c:86:get_average_voltage: chain[2], voltage is: 17.205762
2021-10-14 17:28:13 power_api.c:97:get_average_voltage: aveage voltage is: 17.077178
2021-10-14 17:28:13 frequency.c:540:get_current_min_freq: current min freq 720
2021-10-14 17:28:13 driver-btm-api.c:1660:check_clock_counter: freq 720 clock_counter_limit 92
2021-10-14 17:28:16 register.c:1416:quick_dump_core_hash_clock_counter: bad clock counter. chain = 1, asic = 5, core = 0, found 0, clock counter 0x00000000
2021-10-14 17:28:16 driver-btm-api.c:2097:bitmain_soc_init: clock count check failed after retry, wait for hash rate protect later.
2021-10-14 17:28:16 thread.c:799:create_check_system_status_thread: create thread
2021-10-14 17:28:16 driver-btm-api.c:2113:bitmain_soc_init: Init done!
2021-10-14 17:28:16 driver-btm-api.c:201:set_miner_status: STATUS_INIT
2021-10-14 17:28:21 driver-btm-api.c:201:set_miner_status: STATUS_OKAY
2021-10-14 17:28:25 driver-btm-api.c:1293:dhash_chip_send_job: Version num 4

Quote from: CryptoLLC on November 24, 2020, 04:44:23 AM

I wouldnt want to use any permeneatny adhesive. Im looking to apply solder. What solder do you know I can use for this that can be taken off and on.

Also I have a whole bunch of boards that have the same exact errors when I run the test fixture. All the asic are found but I still get a temp sensor error.

Code:

1970-01-01 00:01:52 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 14, reg = 28
1970-01-01 00:01:52 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 14, reg = 28
1970-01-01 00:01:53 temperature.c:744:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 14, reg = 1
...
1970-01-01 00:01:53 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 10, reg = 28
1970-01-01 00:01:53 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 10, reg = 28
1970-01-01 00:01:54 temperature.c:744:get_temp_info: read temp sensor failed: chain = 0, sensor = 1, chip = 10, reg = 1
...
1970-01-01 00:01:54 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 54, reg = 28
1970-01-01 00:01:54 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 54, reg = 28
1970-01-01 00:01:54 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 54, reg = 28
1970-01-01 00:01:55 temperature.c:744:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 54, reg = 1
1970-01-01 00:01:55 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 50, reg = 28
1970-01-01 00:01:55 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 50, reg = 28
...
1970-01-01 00:01:56 temperature.c:744:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 50, reg = 1
1970-01-01 00:01:56 single_board_test.c:1659:wait_warm_up: temper sensor bad

I have this same exact error for over 10 boards. Also the the error states chip 50, 54, 10, 14 as being bad chips but I get this same exact error on many boards. Cant all have the same exact chips with the same exact error. What could this be? My boards are in 100% perfect condition and all the sudden stopped working one day. Showed temp sensor errors and then stopped working completely. Running this test fixture is showing temo sensor is bad but that cant be either. Something is wrong and I dont know how to find the problem. Please advise. Thank you.

Did you find a solution for this error? I have 3 boards with this same error. Thanks for answering

agbermejo

Posts

Merits