Quote from: citb0in on Today at 05:27:18 PM

Can someone explain to me what this is all about and where in the source code these 5 seconds were set. Why is a new ntime being pulled in every 5 seconds? Thanks in advance.

You can adjust the ntime binary data in submit_noffset_nonce or resubmit to be able to pull the stratum split every 5 seconds to 2 minutes.

You can see here https://bitcointalk.org/index.php?topic=28402.0, for more clarity.

Code:

The output line shows the following:
(5s):223.5G (avg):219.6Gh/s | A:330090 R:0 HW:6904 WU:3027.6/m

Each column is as follows:
5s: A 5 second exponentially decaying average hash rate
avg: An all time average hash rate
A: The number of Accepted shares
R: The number of Rejected shares
HW: The number of HardWare errors
WU: The Work Utility defined as the number of diff1 equivalent shares / minute

AVA 0: 23C/ 47C 2280R | 77.10G/83.20Gh/s | A:120029 R:0 HW:2295 WU:1162.5/m

Each column is as follows:
Temperature (if supported)
Fanspeed (if supported)
A 5 second exponentially decaying average hash rate
An all time average hash rate
The number of accepted shares
The number of rejected shares
The number of hardware erorrs
The Work Utility defined as the number of diff1 equivalent shares / minute

Snowy pear

Posts

Merits