Quote from: Architect_of_Time on November 30, 2024, 02:30:10 AM

I've been mulling over upgrading my miner recently and wanted to get some thoughts from real people who actually have some idea of what they're doing.

I first joined the pool in March of 2015 playing around with CPU and GPU mining mostly for fun. I eventually got a pair of those 5 chip LTC+BTC dual miners (orb

to be continued....

stop experiments with power cables, remember that your miner run 24/7 and u not everytime at home.
Just pull 1-2 new 220V cable from the junction box.
If your boiler/water-heater has already 220V, then the junc.box is already prepared for 220V....
so just set two new MB16's for each 220V cable one MB16' device, then u have all safe and one cable as reserve for the l7 or l9's if buy those.
Use minimum 2mm² cables better 2,5mm², because they dont get hot easy. Dont use the same MB16/Mountpoint as your 220V Boiler/Heater
because it has probably enough KW/h if its an electric ones.

u can snooze the L3's with two additional 100mm or 150mm pipefan's and two DUCT's (3d printer) from 120mm to 100mm/150mm.
keep just an eye on the m³/h airblow!

https://www.ebay.de/itm/354876403200?_skw=rohrventilatoren&itmmeta=01JFNRJTP7EP3X9PFG178ST64J&hash=item52a0482e00:g:bDkAAOSwUbJkmp4L&itmprp=enc%3AAQAJAAAA0HoV3kP08IDx%2BKZ9MfhVJKnggZU2IPGO0gtaO8quzrRJWjJwKBKcfFzJKKBcfsJl3A%2B27DiAPdrfzDxFSW2rnxJwgIOCywPnB9uxJ2j43Tj%2BFCGCJ09deJUpEm%2FlF0RXdT4QpaN8qK5bMTNQ%2FjfcTXnBut9FuD9phYb6I7d4APddVz7vvF23l85VN%2B2P5gDMLQavjla6SS17%2B1IJKRLDgmHuW%2BAyP0xmjld0rDCY7%2Fupk3Aru4mfAJi2rsKNLH9JAAseBbU1d%2BKMC2QdYu3WCP8%3D%7Ctkp%3ABk9SR7Cry7j9ZA

https://www.ebay.de/itm/Kanal-Rohrventilator-Rohreinschub-Abluft-Lufter-Ventilator-Leise-100mm-150mm-/315971906787

this both are fine for L3's , just take one 100mm of the first link for BLOW-SIDE and one of the second link for the SUCTION-SIDE per one L3+/+ Miner. the cheaper one for the front/suction side both need 220V they are more than 50% quiet then the original FANs.

u can also use some little glass tanks or a building containing tanks for keeping fish and other water animals filled with Shell DIALA MINERAL OIL for immersion cooling a pump, two cooling devices for water cooling system and three 6" FANs per watercolling device to cooldown the oil, u need to dismount the FANs of the L3 or just cutting one cable per FAN then u dont need a extra cable wich fakes the FAN because the L3 dont has a immersion mode to bypass the fans for immersion cooling.

with blissz take 425MHZ and 13 (default) on Volting for significant Hashrate boost on the L3's

have fun

itech

Posts

Merits