Quote from: eljotik on December 16, 2014, 11:34:05 PM

Hello,

I did Reset to defaults via browser and it never ends.

Now I see all leds on. green for ethernet is blinkink and other three is on (red, green, yellow). And now I even can't connect via browser.

Anybody know what is wrong and how I can fix this problem.

Anybody can help?

Quote

If all parameters in web page are OK and your miner is working very well, you dont need to update it.

***Go to System->Backup / Flash Firmware you will be able to upgrade the firmware.
Keep settings is chosen by default, you should choose it if you hope to preserve the current settings. You should cancel this option if you hope to restore to initial settings.
Click Browse button to choose upgrade file. After choosing upgrade file, then click Flash image... button to start to download this file to your system. After downloading, please click Proceed button, then upgrade system. During the upgrade process, you need to wait patiently, and must keep power on, otherwise, AntMiner will restore to initial settings. AntMiner will be connected to login interface after finishing system upgrade.
Warning: Power outage during firmware update should be avoided.

Do I need more power to do reset?

Quote

Factory Default RESET Button

Please let the Antminer S3 powered up and running for about 3 minutes, then use a paper clip or something thin to press a button inside this hole on the "RIGHT" hand side of the Ethernet cable connector. Press and Hold the Button for about 10 seconds, let it so, wait for 3 minutes, then Press the Resett Button 1 more time. Please wait for 3 minutes, then turn the power off and power it back on.

I did this many times and it not help.

Doing reset first time I can see difference- yellow led is turned off and green is going dark, but if I do this second time I don't see any changes on leds- It's ok? It' normal?

In advance ty for any support.

eljotik

Posts

Merits