Quote from: dogie on February 05, 2015, 01:18:13 AM

Quote from: SuicidalCookie on February 04, 2015, 11:45:41 PM

Quote from: dogie on February 04, 2015, 11:06:31 PM

Quote from: SuicidalCookie on February 04, 2015, 09:53:46 PM

Today I added a Delta AFC1212DE which has 148cfm at 3900 rpm which is being run through molex so it's going full speed. I also have a second fan running in a pull configuration at 1800 rpm. But for some odd reason Row 1 is 58 degrees and row two is 44. There is A LOT of air being pushed and pulled through this miner, why is one side way hotter? Should I RMA? I've only been running it for 5 days. I should also add I'm running it at the stock 350 setting. So no overclocking. Also the temperature in the garage is 58 degrees Fahrenheit / 14 degrees Celsius.

EDIT 1: It has now started restarting mining every 7 minutes or so. It will be at 1Th then all of a sudden drop to 0 and then start to climb back up. There are no X's.

As others have said, nothing wrong with the temp delta between the two boards, its quite common and a product of a not very accurate measurement system. It does what it needs to though. What power supply are you using, the controller rebooting rather than blades dropping or X'ing is rather uncommon.

I can't remember the brand but It's 850W Bronze. That should be more than enough right?

Not necessarily, being 80%+ efficiency doesn't guarantee its suitability for bitcoin / S5 mining. Please try and find the exact model, as its the first point of debugging for your problems.

EVGA Supernova 850 B2 Power Supply 80PLUS Bronze Certified 850W is the PSU.

SuicidalCookie

Posts

Merits