Quote from: PrometheusX on September 26, 2016, 03:56:00 PM

HowTo

Preparations

- For fresh Raspbian Installations
(I'm using here the newest minimal Image)

.. Flash it on your SD Card
.. Start your Raspberry Pi
.. run

Code:

sudo raspi-config

and configure all what u need
.. restart your Raspberry Pi

.. Update your installation list

Code:

sudo apt-get update

.. Update your Raspbian

Code:

sudo apt-get upgrade

- ROOT user

If you never used root on your raspberry pi

Code:

sudo passwd root

(enter the wanted password for root user)

Code:

su root

(enter the password for root user)

- BerkeleyDB
(MUST be done as root, SUDO dont work)

Code:

apt-get install build-essential
apt-get install git
apt-get install libssl-dev
apt-get install autoconf
apt-get install libtool
apt-get install libboost-all-dev
apt-get install libdb5.3-dev
apt-get install libdb5.3++-dev

(If you get any errors, feel free to contact me)

Code:

mkdir /Berkeley
cd /Berkeley

(I'm building in that folder the needed BerkeleyDB, should not be changed)

Code:

wget http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz
tar -xzvf db-4.8.30.NC.tar.gz
cd db-4.8.30.NC/build_unix
../dist/configure --enable-cxx --disable-shared --with-pic
make && make install

(Downloading , extracting, configure and compiling of the BerkeleyDB 4. Cool

Code:

exit

or

Code:

su your-SLK-user

- SLK download and compiling

Code:

cd ~

(or jump to the folder where u want the SLK source , SLK folder is created from git)

Code:

git clone https://github.com/SilkNetwork/Silk-Core SLK
cd SLK
./autogen.sh
./configure --disable-tests LDFLAGS="-L/Berkeley/db-4.8.30.NC/build_unix" CPPFLAGS="-I/Berkeley/db-4.8.30.NC/build_unix"
make

(now the SLK client is almost ready)

Code:

cd src
cp silkd ~
cp silk-cli ~
cp silk-tx ~
cd ~
strip silkd
strip silk-cli
strip silk-tx

(Replace the ~ with the folder where u want your SLK client)

- Starting SLK Client

Code:

./slikd --daemon

(Currently u get an error of RPC User/Pass)

Before u start it again , edit the silk.conf file in the .silk folder
listen=1 ---> listen=0
(Possibly it will be fixed in upcoming releases)

- Stop the Daemon

Code:

./silk-cli stop

If this HowTo is helpfull then it would be nice if u help me with some SLK
SYZU8arw9LSxDtM7shm2S23WrD5WSbGbB9

Finaly i performd all tests and its working like on an normal PC
Speed it very nice , very stabel , low RAM/CPU usage

When DSLK is released i will make an HowTo for it too

PrometheusX

Posts

Merits