WARNING THIS FIRMWARE MIGHT VOID THE WARRANTY ON YOUR MINER https://img4.hostingpics.net/pics/145857banner.jpg https://img15.hostingpics.net/pics/893377382.jpg https://img15.hostingpics.net/pics/550407481.jpg v1.12 :: 10/12 :: RECOMMENDED UPDATE Download: https://mega.nz/#!ylJX0LCQ!8JWryI0jDhgMvPdH2mrOvybkXCtrpYtQpxu0akdxU1s Upgrade instructions:

Recommended, at your current firmware, set the miner frequency at 400mhz and set your fan speed manual at 25% before flashing.
Download the custom firmware. (don't unpack it)
Flash by going to "System" -> "Upgrade" -> "Flash new firmware image" and select the custom firmware.
After flashing, check the advanced settings page and start at the lowest voltage setting and 400mhz. From there increase your frequency to see how high you can go at the lowest voltage setting.
Start tweaking some more. See the profile suggestions below.

Changes 10/12: - Improved awesome miner / other mining managers compatibility (setting the priority was not working) - fix kernel log window height (saves you double scrolling...) - added permanent antbleed fix (prevent remote control of your miner by bitmain Roll Eyes

) -> for details see http://www.antbleed.com/

Big_Rob

Posts

Merits