Quote from: ZeeeN on March 10, 2020, 08:35:19 PM

Quote from: lacuna776 on March 10, 2020, 02:16:56 PM

Anybody have ideas?
I have AMD Radeon VII, works stably with a standard radiator and coolers.
system win 10 x64, drivers adrenalin last vesion
Disable standard coolers and LED illumination(disconect wires) - gpu still works stably,
After disconnect all coolers, remove radiator and housing leaving the bare card(PCB), place the card in immersion liquid(miniral oil) (temperature about 25 C volume 100 liters) and get in the readings adrenaline 35 C.... Why the difference in temperature?
Then launch claimore, and the temperature in adrenaline on this GPU in a few seconds jumps to 75 C and the system freez... after reboot gpu does not detect by OS, until pci change, but it still freez after after few seconds

Did anyone launch a successful radeon VII in immersion liquid?
http://images.vfl.ru/ii/1583849736/b3ba287f/29830149_m.jpg

i think you need to check riser and power cable.

Use its heat sink, and you have to cool the oil, either with freon or with a radiator .. a card is low wattage ..
https://koolance.com/cooling-systems
These friends have lots of toys for small scales, you could try ..

danbel79

Posts

Merits