Quote from: dogie on January 03, 2015, 09:17:28 PM

Quote from: pekatete on January 03, 2015, 02:32:02 PM

Quote from: taaku on January 03, 2015, 02:27:17 PM

i have s3 miner which is connected to internet and i am able to access through default IP 192.168.1.99 but its not hashing..i have correct pool and the pool is connected..but in miner status page its not hashing its shows as zero...

i have tried to reset the machine but its same .Attached is the screenshot.
img

Go to Network tab then click edit on your connection then switch the protocol to DHCP and Save & Apply.
You'll get a new IP address, so it will not be on 192.168.1.99 anymore, but will begin hashing straight away.

Guys, if you're not sure then let someone else help. You can see from his status image that he IS connected to the pool and he IS receiving work packets but they're being discarded. Why? Because the system thinks he has no hashing boards, as you can see from the missing boards from the bottom of the screen.

Open up the case and check both the ribbon cables are connected to the controller. I'd be really surprised if they weren't but might as well check. Next step is telling me what PSU you are running?

Would be nice if you took your own advice, most of the time. Saying that, this is a public forum that anyone is free to give advice as they see fit.

In any case, last I checked it seemed like the problem was due to the pool, so your advice to open up the the rig may be, to put it politely, another wild goose chase, aka useless afterall! (EDIT: Or should I have said, if you're not sure then let someone else help.)